SACA Certification C-101 (2025) UPDATE Verified Questions And Answers |
With 100% Correct Answers graded A+ Guaranteed Success!!
Function - (ANSWER)The three Fs of product design are form, fit and __________.
Lean Manufacturing - (ANSWER)High product quality, quick delivery, low costs are the primary goals of
what system?
Standardize - (ANSWER)Which 5S step involves formatting 5S work instructions so that they look and
read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean methods to be more
successful - (ANSWER)How does the 5S method aid in the goal of lean manufacturing?
HMI - (ANSWER)What is the interface used with CNC machines to load and monitor programs?
PLC - (ANSWER)The automation of many different manufacturing processes is done through the use of a
small computer called a __________.
An error message. - (ANSWER)When a machine stops due to an problem, what would the machine's HMI
typically display?
Industry 4.0 - (ANSWER)Smart sensors connected to manufacturing networks creates what level of
Industry?
Ethernet - (ANSWER)What standard introduced in the early 1980s established a method to physically
connect machines from different manufacturers enabling them to communicate to one another?
Predictive maintenance - (ANSWER)Which IIoT application monitors equipment during normal operation
to prevent failures to the equipment?
, SACA Certification C-101 (2025) UPDATE Verified Questions And Answers |
With 100% Correct Answers graded A+ Guaranteed Success!!
Standards - (ANSWER)Occupational Safety and Health Administration(OSHA) develops __________ for
safety retail and service industries to construction and manufacturing.
True - (ANSWER)The regulation that requires manufacturers to document and report information on the
types of chemicals they use, store, release into the environment, or dispose of is known as EPCRA. Is this
statement TRUE or FALSE?
Computers - (ANSWER)The use of ___________________marked the advent of the third industrial
revolution?
Notify a supervisor immediately - (ANSWER)If an operator knows a safety problem exists with a machine,
the operator should __________.
Emergency stop - (ANSWER)A(n) __________ is a device or system that shuts down a machine
immediately if the operator is in danger.
It is closed - (ANSWER)If the energy sources are shut down, what would this mean for a pneumatic
valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment - (ANSWER)What are the 5 steps of electrical Lockout/tagout
Falls - (ANSWER)Which of the following is a common cause of workplace death?
Hazard assessment - (ANSWER)The process of identifying potential hazards in the workplace is known as
a __________.
With 100% Correct Answers graded A+ Guaranteed Success!!
Function - (ANSWER)The three Fs of product design are form, fit and __________.
Lean Manufacturing - (ANSWER)High product quality, quick delivery, low costs are the primary goals of
what system?
Standardize - (ANSWER)Which 5S step involves formatting 5S work instructions so that they look and
read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean methods to be more
successful - (ANSWER)How does the 5S method aid in the goal of lean manufacturing?
HMI - (ANSWER)What is the interface used with CNC machines to load and monitor programs?
PLC - (ANSWER)The automation of many different manufacturing processes is done through the use of a
small computer called a __________.
An error message. - (ANSWER)When a machine stops due to an problem, what would the machine's HMI
typically display?
Industry 4.0 - (ANSWER)Smart sensors connected to manufacturing networks creates what level of
Industry?
Ethernet - (ANSWER)What standard introduced in the early 1980s established a method to physically
connect machines from different manufacturers enabling them to communicate to one another?
Predictive maintenance - (ANSWER)Which IIoT application monitors equipment during normal operation
to prevent failures to the equipment?
, SACA Certification C-101 (2025) UPDATE Verified Questions And Answers |
With 100% Correct Answers graded A+ Guaranteed Success!!
Standards - (ANSWER)Occupational Safety and Health Administration(OSHA) develops __________ for
safety retail and service industries to construction and manufacturing.
True - (ANSWER)The regulation that requires manufacturers to document and report information on the
types of chemicals they use, store, release into the environment, or dispose of is known as EPCRA. Is this
statement TRUE or FALSE?
Computers - (ANSWER)The use of ___________________marked the advent of the third industrial
revolution?
Notify a supervisor immediately - (ANSWER)If an operator knows a safety problem exists with a machine,
the operator should __________.
Emergency stop - (ANSWER)A(n) __________ is a device or system that shuts down a machine
immediately if the operator is in danger.
It is closed - (ANSWER)If the energy sources are shut down, what would this mean for a pneumatic
valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment - (ANSWER)What are the 5 steps of electrical Lockout/tagout
Falls - (ANSWER)Which of the following is a common cause of workplace death?
Hazard assessment - (ANSWER)The process of identifying potential hazards in the workplace is known as
a __________.
