SECURITY FORCES QUESTIONS WITH VERIFIED
ANSWERS
Code 1 - Answers - Routine Dispatch
Code 2 - Answers - Urgent Dispatch
Code 3 - Answers - Emergency Dispatch
Code 4 - Answers - Wants & Warrants
Code 4A - Answers - Wants & Warrants hit at VCC
Code 4B - Answers - Wants & Warrants hits at Tye Gate
Code 5 - Answers - Traffic Stop
Code 6 - Answers - Latrine Break
Code 7 - Answers - Meal Break
Code 8 - Answers - Person in Custody
Code 8A - Answers - Person (OPP) Gender in Custody
Code 9 - Answers - Change radio frequency
Code 10 - Answers - All Secure
Code 11 - Answers - Duress
Code 12 - Answers - Suspicious Item/Package
Code 13 - Answers - Immediate assistance required
Code 14M - Answers - DWI (Military)
Code 14C - Answers - DWI (Civilian)
Code 15 - Answers - Alarm Activation
Radio Transmission: Will not be made __ Ft of an aircraft during fuel cell mnx - Answers
- 50ft
, How do personnel open/close facilities?
7 Steps - Answers - (1) Have their unique I-Button out and ready to be pressed to the
face of the I-Button reader. An
individual's unique I-Button operates as the day-to-day authentication technique for
opening/closing alarmed areas.
(2) Approach the alarmed area's keypad.
(3) Push the (#) button.
(4) Place I-button on round sliver circle on keypad.
(5) Enter the 4-digit pin number.
(6) Push the (#) button.
(7) Push "A" to Disarm or "B" to Arm.
How does personnel indicate they are under duress when opening a facility? - Answers
- Adding one number to the first number of their pin number upon entry into the facility
When do you contact the ESS NCO to initiate a work order on same individual alarm
point?
2 Answers - Answers - (a) More than one (1) false alarm is received within the previous
30 days.
(b) More than three (3) nuisance alarms are received within the previous 30 days.
What do you do during periods of alarm system failure?
3 Steps - Answers - (1) Verify the owner/user requesting access to the facility via the
alarmed facility access authorization letter.
(2) Authenticate with the owner/user by using the facility's current authentication code.
(3) If under duress or other conditions exist where you would not want to open the
facility, misauthenticate with the controller by giving him/her the wrong response to their
authentication.
Who is responsible to ensure BDOC and all alarm facilities have the updated
authentications letters? - Answers - ESS/NCO
The ESS/NCO will ensure all units perform their test when? - Answers - Quarterly
What must BDOC due before and while conducting system test?
2 steps - Answers - (1) Will authenticate with authorized personnel before a test of their
systems is initiated and perform test as directed by ESS/NCO.
ANSWERS
Code 1 - Answers - Routine Dispatch
Code 2 - Answers - Urgent Dispatch
Code 3 - Answers - Emergency Dispatch
Code 4 - Answers - Wants & Warrants
Code 4A - Answers - Wants & Warrants hit at VCC
Code 4B - Answers - Wants & Warrants hits at Tye Gate
Code 5 - Answers - Traffic Stop
Code 6 - Answers - Latrine Break
Code 7 - Answers - Meal Break
Code 8 - Answers - Person in Custody
Code 8A - Answers - Person (OPP) Gender in Custody
Code 9 - Answers - Change radio frequency
Code 10 - Answers - All Secure
Code 11 - Answers - Duress
Code 12 - Answers - Suspicious Item/Package
Code 13 - Answers - Immediate assistance required
Code 14M - Answers - DWI (Military)
Code 14C - Answers - DWI (Civilian)
Code 15 - Answers - Alarm Activation
Radio Transmission: Will not be made __ Ft of an aircraft during fuel cell mnx - Answers
- 50ft
, How do personnel open/close facilities?
7 Steps - Answers - (1) Have their unique I-Button out and ready to be pressed to the
face of the I-Button reader. An
individual's unique I-Button operates as the day-to-day authentication technique for
opening/closing alarmed areas.
(2) Approach the alarmed area's keypad.
(3) Push the (#) button.
(4) Place I-button on round sliver circle on keypad.
(5) Enter the 4-digit pin number.
(6) Push the (#) button.
(7) Push "A" to Disarm or "B" to Arm.
How does personnel indicate they are under duress when opening a facility? - Answers
- Adding one number to the first number of their pin number upon entry into the facility
When do you contact the ESS NCO to initiate a work order on same individual alarm
point?
2 Answers - Answers - (a) More than one (1) false alarm is received within the previous
30 days.
(b) More than three (3) nuisance alarms are received within the previous 30 days.
What do you do during periods of alarm system failure?
3 Steps - Answers - (1) Verify the owner/user requesting access to the facility via the
alarmed facility access authorization letter.
(2) Authenticate with the owner/user by using the facility's current authentication code.
(3) If under duress or other conditions exist where you would not want to open the
facility, misauthenticate with the controller by giving him/her the wrong response to their
authentication.
Who is responsible to ensure BDOC and all alarm facilities have the updated
authentications letters? - Answers - ESS/NCO
The ESS/NCO will ensure all units perform their test when? - Answers - Quarterly
What must BDOC due before and while conducting system test?
2 steps - Answers - (1) Will authenticate with authorized personnel before a test of their
systems is initiated and perform test as directed by ESS/NCO.
