Dell Certification Test 2026 Actual Questions with Verified
Answers | Latest Update| 100% Correct A+
Grade
Leave the first rating
Save
Students also studied
Flashcard sets Study guides
Sailpoint Essentials BICSI IN225 7.0, Installer 2, Copper 2... CPS 510 Midterm CS
Teacher 112 terms Teacher 322 terms Teacher 17 terms Te
cliffordrosasi Preview Brunojr7 Preview feskioko2012 Preview
Terms in this set (53)
If the system is not booting into the operating system, Right answer:
how can you check if the hard drive is detected?
- Go to BIOS
- The HDD indicator light or LED
- From within the Windows (or other) operating system
- Go to BIOS
- Open the Chassis and Check
What does Factory Data Reset do on Dell Venue Correct answer:
Tablet?
- Will erase all personal data and downloaded applications on the Tablet
- Will erase all personal data and downloaded
applications on the Tablet
- Resets the hardware, personal data and applications
are not affected
-Will allow you to restore the Tablet to an earlier date
-Erases only personal data, all downloaded
applications will remain intact
, State True or False: Statement is:
Discrete Graphics cards connect to the motherboard of - True
a computer system using a slot, typically an
Accelerated Graphics Port (AGP) or a Peripheral
Component Interconnect Express (PCIe)
Why sometimes the values in BIOS cannot be saved Correct Answer:
and shows as manufacturing mode?
- The systemboard jumper is at SERVICE_MODE state
- The systemboard jumper is at CMOS_CLR state
- The systemboard jumper is at SERVICE_MODE state
- The systemboard is faulty
- THe systemboard jumper is at PASSWORD-CLR state
Choose all that Apply: Correct Answers:
Which of the following statements are true about the
New PSU BIST? - To restart the PSU BIST: Disconnect the AC power cord for 15 seconds (PSU
BIST reset time), and then plug in the AC power cord
- During PSU BIST, If PSU LED light will stay ON - PSU is
functioning properly - To start the PSU BIST: Plug in the AC power cord & note the LED light status
- To restart the PSU BIST : Disconnect the AC power - Ensure to disconnect the AC power cord from the PSU, before starting the
cord for 15 seconds (PSU BIST reset time), and then PSU BIST
plug in the AC power cord
- To start the PSU BIST: Plug in the AC power cord &
note the LED light status
- Ensure to disconnect the AC power cord from the
PSU, before starting the PSU BIST
Answers | Latest Update| 100% Correct A+
Grade
Leave the first rating
Save
Students also studied
Flashcard sets Study guides
Sailpoint Essentials BICSI IN225 7.0, Installer 2, Copper 2... CPS 510 Midterm CS
Teacher 112 terms Teacher 322 terms Teacher 17 terms Te
cliffordrosasi Preview Brunojr7 Preview feskioko2012 Preview
Terms in this set (53)
If the system is not booting into the operating system, Right answer:
how can you check if the hard drive is detected?
- Go to BIOS
- The HDD indicator light or LED
- From within the Windows (or other) operating system
- Go to BIOS
- Open the Chassis and Check
What does Factory Data Reset do on Dell Venue Correct answer:
Tablet?
- Will erase all personal data and downloaded applications on the Tablet
- Will erase all personal data and downloaded
applications on the Tablet
- Resets the hardware, personal data and applications
are not affected
-Will allow you to restore the Tablet to an earlier date
-Erases only personal data, all downloaded
applications will remain intact
, State True or False: Statement is:
Discrete Graphics cards connect to the motherboard of - True
a computer system using a slot, typically an
Accelerated Graphics Port (AGP) or a Peripheral
Component Interconnect Express (PCIe)
Why sometimes the values in BIOS cannot be saved Correct Answer:
and shows as manufacturing mode?
- The systemboard jumper is at SERVICE_MODE state
- The systemboard jumper is at CMOS_CLR state
- The systemboard jumper is at SERVICE_MODE state
- The systemboard is faulty
- THe systemboard jumper is at PASSWORD-CLR state
Choose all that Apply: Correct Answers:
Which of the following statements are true about the
New PSU BIST? - To restart the PSU BIST: Disconnect the AC power cord for 15 seconds (PSU
BIST reset time), and then plug in the AC power cord
- During PSU BIST, If PSU LED light will stay ON - PSU is
functioning properly - To start the PSU BIST: Plug in the AC power cord & note the LED light status
- To restart the PSU BIST : Disconnect the AC power - Ensure to disconnect the AC power cord from the PSU, before starting the
cord for 15 seconds (PSU BIST reset time), and then PSU BIST
plug in the AC power cord
- To start the PSU BIST: Plug in the AC power cord &
note the LED light status
- Ensure to disconnect the AC power cord from the
PSU, before starting the PSU BIST
