ASBESTOS CONTRACTOR/SUPERVISOR
EXAM 2026 | COMPLETE STUDY GUIDE &
PRACTICE QUESTIONS
| GRADED A+ | GUARANTEED SUCCESS
Updated 2026 Questions and Answers
100% Verified Exam Prep and Comprehensive
Rationales Included
, Removal of 5 feet of pipe insulation in order to fix a leak Which of the following operations would be considered to be an OSHA Class II
in the pipe job?
Holes cut in the polyethylene next to the machines Make-up air for a negative pressure enclosure usually comes from
Sealed, labeled containers or wraps All asbestos waste must be
Inhalation Asbestos enters the body via
Guard rails Free standing mobile scaffolding that is 16 feet high are required to have
LOCKABLE WHEELS, NOT TO BE LESS THAN 4 FEET WIDE, BE INSPECTED BY A
COMPETENT PERSON, and must have what?
The removal of all specified asbestos-containing A final visual inspection is used to determine which one of the final steps of an
materials abatement project?
50-90 times How much greater is the incidence of lung cancer in asbestos workers who smoke
than in non-asbestos workers who do not smoke?
Personal air monitoring Which of the following records must be kept for a minimum of 30 years?
Any job where the amount of friable ACM being removed AHERA regulations allow PCM to be used as a method of analysis for:
is less than 260 linear feet or 160 square feet
Visible emissions When removing asbestos-containing materials, which of the following is most
difficult to control?
OSHA What federal agency regulates asbestos in the manufacturing sector through
29CFR 1910.1001 and in the construction industry through 29 CFR 1926.1101?
2 layers of 4 mil on the walls and 2 layers of 6 mil on the When constructing a negative pressure containment for abatement, common
floors practice is to place polyethylene sheeting on the walls and floors consisting of
EXAM 2026 | COMPLETE STUDY GUIDE &
PRACTICE QUESTIONS
| GRADED A+ | GUARANTEED SUCCESS
Updated 2026 Questions and Answers
100% Verified Exam Prep and Comprehensive
Rationales Included
, Removal of 5 feet of pipe insulation in order to fix a leak Which of the following operations would be considered to be an OSHA Class II
in the pipe job?
Holes cut in the polyethylene next to the machines Make-up air for a negative pressure enclosure usually comes from
Sealed, labeled containers or wraps All asbestos waste must be
Inhalation Asbestos enters the body via
Guard rails Free standing mobile scaffolding that is 16 feet high are required to have
LOCKABLE WHEELS, NOT TO BE LESS THAN 4 FEET WIDE, BE INSPECTED BY A
COMPETENT PERSON, and must have what?
The removal of all specified asbestos-containing A final visual inspection is used to determine which one of the final steps of an
materials abatement project?
50-90 times How much greater is the incidence of lung cancer in asbestos workers who smoke
than in non-asbestos workers who do not smoke?
Personal air monitoring Which of the following records must be kept for a minimum of 30 years?
Any job where the amount of friable ACM being removed AHERA regulations allow PCM to be used as a method of analysis for:
is less than 260 linear feet or 160 square feet
Visible emissions When removing asbestos-containing materials, which of the following is most
difficult to control?
OSHA What federal agency regulates asbestos in the manufacturing sector through
29CFR 1910.1001 and in the construction industry through 29 CFR 1926.1101?
2 layers of 4 mil on the walls and 2 layers of 6 mil on the When constructing a negative pressure containment for abatement, common
floors practice is to place polyethylene sheeting on the walls and floors consisting of
