NAVY AM Test 1 Questions and Correct
Answers
Question 1
What are the two types of maintenance?
Correct Answer
1.) Rework
2.) Upkeep
Question 2
What is the publication number for the Aircraft Structural Hardware Manual?
Correct Answer
01-1A-8
Question 3
Universal joints do what?
Correct Answer
Allow bolt/nut to be turned with handle held at an angle
Question 4
DONT do what with a ratchet
Correct Answer
Break loose tight nuts/bolts
Page 1 of 24
,Question 5
What does the Terminology Caution used for in technical publications?
Correct Answer
Used for an operating procedure, practice or condition, etc., that may result in
damage to equipment, if not carefully observed or followed.
Question 6
What are the types of micrometer?
Correct Answer
1.) Outside Micrometer (measures outside diameter)
2.) Inside Micrometer (measures inside diameter)
3.) Depth Micrometer (measures depth of holes and grooves)
Question 7
What does NALCOMIS stand for?
Correct Answer
Naval Aviation Logistics Command Management Information System
Question 8
FOD can be caused by what ?
Correct Answer
Improper usage or storage of tools
Question 9
What are the 5 types of Maintenance Manuals?
Correct Answer
1.) Maintenance Instruction Manuals (MIMs)
2.) Illustrated Parts Breakdown (IPB) manuals
3.) Work Unit Code (WUC) manuals
4.) General Aircraft information (GAI) manuals
5.) Planned Maintenance System (PMS) manuals
Page 2 of 24
, Question 10
What three conditions are necessary to create an EMI as demonstrated by the EMI
triangle?
Correct Answer
1.) Interference source
2.) Sensitive victim
3.) Coupling path
Question 11
What are the six terminologies commonly used in technical publications?
Correct Answer
1.) Warning
2.) Caution
3.) Note
4.) Shall
5.) Should
6.) Will
Question 12
What are the two types of Technical Manuals (TM)?
Correct Answer
1.) Operational Manual
2.) Maintenance Manual
Question 13
What are the 3 types of tool boxes
Correct Answer
1. Ordnance loading boxes
2. Wire repair box
3. hydraulic tool box
Page 3 of 24
Answers
Question 1
What are the two types of maintenance?
Correct Answer
1.) Rework
2.) Upkeep
Question 2
What is the publication number for the Aircraft Structural Hardware Manual?
Correct Answer
01-1A-8
Question 3
Universal joints do what?
Correct Answer
Allow bolt/nut to be turned with handle held at an angle
Question 4
DONT do what with a ratchet
Correct Answer
Break loose tight nuts/bolts
Page 1 of 24
,Question 5
What does the Terminology Caution used for in technical publications?
Correct Answer
Used for an operating procedure, practice or condition, etc., that may result in
damage to equipment, if not carefully observed or followed.
Question 6
What are the types of micrometer?
Correct Answer
1.) Outside Micrometer (measures outside diameter)
2.) Inside Micrometer (measures inside diameter)
3.) Depth Micrometer (measures depth of holes and grooves)
Question 7
What does NALCOMIS stand for?
Correct Answer
Naval Aviation Logistics Command Management Information System
Question 8
FOD can be caused by what ?
Correct Answer
Improper usage or storage of tools
Question 9
What are the 5 types of Maintenance Manuals?
Correct Answer
1.) Maintenance Instruction Manuals (MIMs)
2.) Illustrated Parts Breakdown (IPB) manuals
3.) Work Unit Code (WUC) manuals
4.) General Aircraft information (GAI) manuals
5.) Planned Maintenance System (PMS) manuals
Page 2 of 24
, Question 10
What three conditions are necessary to create an EMI as demonstrated by the EMI
triangle?
Correct Answer
1.) Interference source
2.) Sensitive victim
3.) Coupling path
Question 11
What are the six terminologies commonly used in technical publications?
Correct Answer
1.) Warning
2.) Caution
3.) Note
4.) Shall
5.) Should
6.) Will
Question 12
What are the two types of Technical Manuals (TM)?
Correct Answer
1.) Operational Manual
2.) Maintenance Manual
Question 13
What are the 3 types of tool boxes
Correct Answer
1. Ordnance loading boxes
2. Wire repair box
3. hydraulic tool box
Page 3 of 24
