EVITP CERTIFICATION PRACTICE EXAM 2026
COMPLETE STUDY GUIDE WITH 300
PRACTICE QUESTIONS VERIFIED ANSWERS
AND DETAILED EXPLANATIONS FOR
ELECTRIC VEHICLE INFRASTRUCTURE
TRAINING PROGRAM CERTIFICATION
=== OVERVIEW ===
• This practice exam contains 300 questions covering all EVITP certification
domains: EVSE technology, NEC 2023 (Articles 625, 220, 230, 250, 110), load
calculations, site assessment, safety (NFPA 70E, arc flash, LOTO), installation
methods, communication protocols (OCPP, ISO 15118), V2G, troubleshooting,
and business practices .
• Each question includes vertically spaced options, the correct answer in bold,
and a detailed EXPERT RATIONALE below it. Study strategically: focus on
mastering load calculations and NEC Article 625, which are heavily tested .
QUESTION 1
What is the minimum passing score required to successfully complete the EVITP
certification exam?
A) 60%
B) 70%
C) 75%
D) 80%
CORRECT ANSWER: B) 70%
EXPERT RATIONALE: The EVITP certification exam requires a minimum passing
score of 70% to receive certification. This standard is set by the EVITP program to
ensure sufficient comprehension of electric vehicle infrastructure installation and
safety practices. While training courses may use different thresholds (such as 75%
for quizzes), the official exam pass mark is 70% .
,QUESTION 2
How long is EVITP certification valid before it must be renewed?
A) 1 year
B) 2 years
C) 3 years
D) 5 years
CORRECT ANSWER: C) 3 years
EXPERT RATIONALE: EVITP certification must be renewed every three years.
Renewal requires re-examination to ensure certified electricians remain current
with evolving industry standards, code updates, and emerging EVSE technologies .
QUESTION 3
Which of the following is a prerequisite for enrolling in the EVITP certification
program?
A) High school diploma only
B) Valid driver's license
C) State-issued electrician license or 8,000 hours of documented electrical
construction experience
D) Completion of an OSHA 30-hour course
CORRECT ANSWER: C) State-issued electrician license or 8,000 hours of
documented electrical construction experience
EXPERT RATIONALE: EVITP requires participants to be state-licensed or certified
electricians. In states without licensing requirements, applicants must provide
documentation of a minimum of 8,000 hours of hands-on electrical construction
experience. This ensures that candidates have the foundational electrical
knowledge necessary to understand complex EVSE installations .
,QUESTION 4
Approximately how many hours of online instruction are required to complete the
EVITP training course?
A) 10 hours
B) 20 hours
C) 30 hours
D) 40 hours
CORRECT ANSWER: B) 20 hours
EXPERT RATIONALE: The EVITP online training course requires approximately 20
hours of instruction time, followed by a proctored online examination. The
combined training and exam process totals roughly 20 hours, with the course
costing $275 as of 2025 .
QUESTION 5
Which entity requires that at least one electrician on each crew installing CEC-
funded EV chargers must hold EVITP certification?
A) Washington State Legislature
B) California Energy Commission (CEC)
C) Tennessee Valley Authority (TVA)
D) City & Guilds
CORRECT ANSWER: B) California Energy Commission (CEC)
EXPERT RATIONALE: California Public Utilities Code Section 740.20 mandates that
most EV chargers and equipment funded by the CEC or California Air Resources
Board must be installed by contractors with appropriate licenses, with at least one
electrician on each crew holding EVITP certification. For projects installing ports
supplying 25 kW or more, at least 25% of electricians on the crew must have EVITP
certification .
, QUESTION 6
Under Washington State legislation effective January 1, 2026, installation of EVSE on
public works projects must be performed by whom?
A) Any licensed electrician
B) Persons certified by EVITP or a similar nationally recognized program
C) Apprentices only
D) General contractors without electrical certification
CORRECT ANSWER: B) Persons certified by EVITP or a similar nationally
recognized program
EXPERT RATIONALE: Washington State's SSB 5528, effective January 1, 2026,
requires that installation of electric vehicle supply equipment on public works
projects be performed by persons certified by EVITP or a similar nationally
recognized program. The requirement applies only to work on electrical
components during installation and maintenance and is limited to programs open
to all general journeyman-level electricians .
QUESTION 7
What is the approximate cost of the EVITP online training course as of 2025?
A) $150
B) $200
C) $275
D) $400
CORRECT ANSWER: C) $275
EXPERT RATIONALE: The EVITP online training course costs approximately $275.
This fee covers the 20-hour online instruction and the proctored certification exam.
Some organizations, such as the Tennessee Valley Authority, offer reimbursement
stipends (e.g., $775) to qualified electricians who complete the course and exam .
COMPLETE STUDY GUIDE WITH 300
PRACTICE QUESTIONS VERIFIED ANSWERS
AND DETAILED EXPLANATIONS FOR
ELECTRIC VEHICLE INFRASTRUCTURE
TRAINING PROGRAM CERTIFICATION
=== OVERVIEW ===
• This practice exam contains 300 questions covering all EVITP certification
domains: EVSE technology, NEC 2023 (Articles 625, 220, 230, 250, 110), load
calculations, site assessment, safety (NFPA 70E, arc flash, LOTO), installation
methods, communication protocols (OCPP, ISO 15118), V2G, troubleshooting,
and business practices .
• Each question includes vertically spaced options, the correct answer in bold,
and a detailed EXPERT RATIONALE below it. Study strategically: focus on
mastering load calculations and NEC Article 625, which are heavily tested .
QUESTION 1
What is the minimum passing score required to successfully complete the EVITP
certification exam?
A) 60%
B) 70%
C) 75%
D) 80%
CORRECT ANSWER: B) 70%
EXPERT RATIONALE: The EVITP certification exam requires a minimum passing
score of 70% to receive certification. This standard is set by the EVITP program to
ensure sufficient comprehension of electric vehicle infrastructure installation and
safety practices. While training courses may use different thresholds (such as 75%
for quizzes), the official exam pass mark is 70% .
,QUESTION 2
How long is EVITP certification valid before it must be renewed?
A) 1 year
B) 2 years
C) 3 years
D) 5 years
CORRECT ANSWER: C) 3 years
EXPERT RATIONALE: EVITP certification must be renewed every three years.
Renewal requires re-examination to ensure certified electricians remain current
with evolving industry standards, code updates, and emerging EVSE technologies .
QUESTION 3
Which of the following is a prerequisite for enrolling in the EVITP certification
program?
A) High school diploma only
B) Valid driver's license
C) State-issued electrician license or 8,000 hours of documented electrical
construction experience
D) Completion of an OSHA 30-hour course
CORRECT ANSWER: C) State-issued electrician license or 8,000 hours of
documented electrical construction experience
EXPERT RATIONALE: EVITP requires participants to be state-licensed or certified
electricians. In states without licensing requirements, applicants must provide
documentation of a minimum of 8,000 hours of hands-on electrical construction
experience. This ensures that candidates have the foundational electrical
knowledge necessary to understand complex EVSE installations .
,QUESTION 4
Approximately how many hours of online instruction are required to complete the
EVITP training course?
A) 10 hours
B) 20 hours
C) 30 hours
D) 40 hours
CORRECT ANSWER: B) 20 hours
EXPERT RATIONALE: The EVITP online training course requires approximately 20
hours of instruction time, followed by a proctored online examination. The
combined training and exam process totals roughly 20 hours, with the course
costing $275 as of 2025 .
QUESTION 5
Which entity requires that at least one electrician on each crew installing CEC-
funded EV chargers must hold EVITP certification?
A) Washington State Legislature
B) California Energy Commission (CEC)
C) Tennessee Valley Authority (TVA)
D) City & Guilds
CORRECT ANSWER: B) California Energy Commission (CEC)
EXPERT RATIONALE: California Public Utilities Code Section 740.20 mandates that
most EV chargers and equipment funded by the CEC or California Air Resources
Board must be installed by contractors with appropriate licenses, with at least one
electrician on each crew holding EVITP certification. For projects installing ports
supplying 25 kW or more, at least 25% of electricians on the crew must have EVITP
certification .
, QUESTION 6
Under Washington State legislation effective January 1, 2026, installation of EVSE on
public works projects must be performed by whom?
A) Any licensed electrician
B) Persons certified by EVITP or a similar nationally recognized program
C) Apprentices only
D) General contractors without electrical certification
CORRECT ANSWER: B) Persons certified by EVITP or a similar nationally
recognized program
EXPERT RATIONALE: Washington State's SSB 5528, effective January 1, 2026,
requires that installation of electric vehicle supply equipment on public works
projects be performed by persons certified by EVITP or a similar nationally
recognized program. The requirement applies only to work on electrical
components during installation and maintenance and is limited to programs open
to all general journeyman-level electricians .
QUESTION 7
What is the approximate cost of the EVITP online training course as of 2025?
A) $150
B) $200
C) $275
D) $400
CORRECT ANSWER: C) $275
EXPERT RATIONALE: The EVITP online training course costs approximately $275.
This fee covers the 20-hour online instruction and the proctored certification exam.
Some organizations, such as the Tennessee Valley Authority, offer reimbursement
stipends (e.g., $775) to qualified electricians who complete the course and exam .
