GoJet CRJ550 & CRJ550/700 Oral Exam Questions &
Answers | Latest Already Graded A+ |Questions with
Correct Answers 2026 latest update!!
Leave the first rating
Save
Students also studied
Flashcard sets Study guides
The Associate CET Study Guide (Dia... Wind Operations ET 111 final Exam Annex C Radio Op PLT
Teacher 30 terms Teacher 38 terms Teacher 30 terms Te
victor_kimotho Preview John_Mwaki Preview Oblock872 Preview
Terms in this set (392)
What purpose do the AUTO XFER switches serve on the Used to disable automatic transfer of associated IDG. If FAIL is illuminated
electrical panel? there is a fault preventing autotransfer
A FAULT light on the guarded IDG button indicates IDG fault due to a HOT-LOP situation
what?
Why would an IDG automatically disconnect? Over-torque or over-temp scenario
Will an IDG automatically disconnect when there is low No - there must be a high oil temperature or over torque for it to automatically
oil pressure? disconnect
On the electrical EICAS page an AMBER readout of the Generator overload
generator output indicates what?
On the electrical EICAS page you see one generator There is insufficient data being provided
output with half intensity magenta numbers. What does
that mean?
, If you were to see amber dashes on the EICAS The data being provided is invalid and thus has been removed.
electrical page in place of the generator output, what
would that mean?
What is the voltage, phase, and frequency of the IDG's? 115v, 3 phase, 400hz
Why is the ADG bus not shown on the EICAS electrical It will only display when the ADG is deployed and producing power
page normally?
The EICAS synoptic page has the word DISC next to The IDG has been manually or automatically disconnected. What? Did you
one of the IDG's. What does this mean? think it meant you were gonna play a sick game of frisbee golf? You basic bitch.
AUTO XFER OFF in white vs. amber would mean what If white the AUTO XFER switch was selected off by the pilot, if in amber the
on the EICAS electrical page? automatic transfer function has failed.
Voltage output of an IDG turns WHITE when what Less than 108v or more than 130v
parameters are exceeded?
You see SERVICE CONFIGURATION on the AC External AC power is hooked up and has been selected from the external
electrical page, what does this mean? service panel. ONLY the AC service bus will be powered.
What would have to happen to get the caution EICAS An IDG exceeded 40kVa.
message GEN1(2) OVLD?
What would an IDG1 amber caution message tell you? A HOT/LOP situation has occured on IDG1
If the red EMER PWR ONLY warning presents on the Indicates the ADG has deployed
EICAS, what has happened?
You see a white ADG FAIL status message, what does The GCU of the ADG has failed. Probably shouldn't have had your 550 serviced
this tell you? at Jiffy Lube dummy....
Name a few items on the AC Service Bus Water system, toilet, APU charger, cabin lighting, logo lights
What does the ADG power? AC ESS Bus, Hydraulic pump 3B, Stab Trim channel 2, slats and flaps at half
speed
What protects the ADG from frost or ice accumulation An internal heater that comes on when the nose gear is retracted
in flight while stowed?
After an ADG deployment you get the APU running. Press the PWR TXFR OVERRIDE switch on the ADG control panel
What must you do to connect the APU to the electrical
system?
Answers | Latest Already Graded A+ |Questions with
Correct Answers 2026 latest update!!
Leave the first rating
Save
Students also studied
Flashcard sets Study guides
The Associate CET Study Guide (Dia... Wind Operations ET 111 final Exam Annex C Radio Op PLT
Teacher 30 terms Teacher 38 terms Teacher 30 terms Te
victor_kimotho Preview John_Mwaki Preview Oblock872 Preview
Terms in this set (392)
What purpose do the AUTO XFER switches serve on the Used to disable automatic transfer of associated IDG. If FAIL is illuminated
electrical panel? there is a fault preventing autotransfer
A FAULT light on the guarded IDG button indicates IDG fault due to a HOT-LOP situation
what?
Why would an IDG automatically disconnect? Over-torque or over-temp scenario
Will an IDG automatically disconnect when there is low No - there must be a high oil temperature or over torque for it to automatically
oil pressure? disconnect
On the electrical EICAS page an AMBER readout of the Generator overload
generator output indicates what?
On the electrical EICAS page you see one generator There is insufficient data being provided
output with half intensity magenta numbers. What does
that mean?
, If you were to see amber dashes on the EICAS The data being provided is invalid and thus has been removed.
electrical page in place of the generator output, what
would that mean?
What is the voltage, phase, and frequency of the IDG's? 115v, 3 phase, 400hz
Why is the ADG bus not shown on the EICAS electrical It will only display when the ADG is deployed and producing power
page normally?
The EICAS synoptic page has the word DISC next to The IDG has been manually or automatically disconnected. What? Did you
one of the IDG's. What does this mean? think it meant you were gonna play a sick game of frisbee golf? You basic bitch.
AUTO XFER OFF in white vs. amber would mean what If white the AUTO XFER switch was selected off by the pilot, if in amber the
on the EICAS electrical page? automatic transfer function has failed.
Voltage output of an IDG turns WHITE when what Less than 108v or more than 130v
parameters are exceeded?
You see SERVICE CONFIGURATION on the AC External AC power is hooked up and has been selected from the external
electrical page, what does this mean? service panel. ONLY the AC service bus will be powered.
What would have to happen to get the caution EICAS An IDG exceeded 40kVa.
message GEN1(2) OVLD?
What would an IDG1 amber caution message tell you? A HOT/LOP situation has occured on IDG1
If the red EMER PWR ONLY warning presents on the Indicates the ADG has deployed
EICAS, what has happened?
You see a white ADG FAIL status message, what does The GCU of the ADG has failed. Probably shouldn't have had your 550 serviced
this tell you? at Jiffy Lube dummy....
Name a few items on the AC Service Bus Water system, toilet, APU charger, cabin lighting, logo lights
What does the ADG power? AC ESS Bus, Hydraulic pump 3B, Stab Trim channel 2, slats and flaps at half
speed
What protects the ADG from frost or ice accumulation An internal heater that comes on when the nose gear is retracted
in flight while stowed?
After an ADG deployment you get the APU running. Press the PWR TXFR OVERRIDE switch on the ADG control panel
What must you do to connect the APU to the electrical
system?
