CCNA 2 v7 Final Exam
2026 | Questions, Answers
& Rationales Study Guide
|Graded A+ | Guaranteed
success|
Updated 2026 Questions and Answers
100% Verified Exam Prep and Comprehensive
Rationales
Included
, Which option shows a correctly configured IPv4 default ip route 0.0.0.0 0.0.0.0 S0/0/0
static route?
Refer to the exhibit. Which static route command can be ipv6 route 2001:db8:12:10::/64 S0/0/1 fe80::2
entered on R1 to forward traffic to the LAN connected to
R2?
What is a method to launch a VLAN hopping attack? introducing a rogue switch and enabling trunking
A cybersecurity analyst is using the macof tool to MAC address table overflow
evaluate configurations of switches deployed in the
backbone network of an organization. Which type of LAN
attack is the analyst targeting during this evaluation?
Refer to the exhibit. A network administrator is The state is not maintained by the DHCPv6 server under stateless DHCPv6
configuring a router as a DHCPv6 server. The operation.
administrator issues a show ipv6 dhcp pool command to
verify the configuration. Which statement explains the
reason that the number of active clients is 0?
Refer to the exhibit. A network administrator configured the virtual IP address and the virtual MAC address for the HSRP group 1
routers R1 and R2 as part of HSRP group 1. After the
routers have been reloaded, a user on Host1 complained
of lack of connectivity to the Internet The network
administrator issued the show standby brief command on
both routers to verify the HSRP operations. In addition,
the administrator observed the ARP table on Host1. Which
entry should be seen in the ARP table on Host1 in order
to gain connectivity to the Internet?
Match the forwarding characteristic to its type. (Not all Picture
options are used.)
Which statement is correct about how a Layer 2 switch Frame forwarding decisions are based on MAC address and port mappings in the
determines how to forward frames? CAM table.
Which statement describes a result after multiple Cisco The broadcast domain expands to all switches.
LAN switches are interconnected?
2026 | Questions, Answers
& Rationales Study Guide
|Graded A+ | Guaranteed
success|
Updated 2026 Questions and Answers
100% Verified Exam Prep and Comprehensive
Rationales
Included
, Which option shows a correctly configured IPv4 default ip route 0.0.0.0 0.0.0.0 S0/0/0
static route?
Refer to the exhibit. Which static route command can be ipv6 route 2001:db8:12:10::/64 S0/0/1 fe80::2
entered on R1 to forward traffic to the LAN connected to
R2?
What is a method to launch a VLAN hopping attack? introducing a rogue switch and enabling trunking
A cybersecurity analyst is using the macof tool to MAC address table overflow
evaluate configurations of switches deployed in the
backbone network of an organization. Which type of LAN
attack is the analyst targeting during this evaluation?
Refer to the exhibit. A network administrator is The state is not maintained by the DHCPv6 server under stateless DHCPv6
configuring a router as a DHCPv6 server. The operation.
administrator issues a show ipv6 dhcp pool command to
verify the configuration. Which statement explains the
reason that the number of active clients is 0?
Refer to the exhibit. A network administrator configured the virtual IP address and the virtual MAC address for the HSRP group 1
routers R1 and R2 as part of HSRP group 1. After the
routers have been reloaded, a user on Host1 complained
of lack of connectivity to the Internet The network
administrator issued the show standby brief command on
both routers to verify the HSRP operations. In addition,
the administrator observed the ARP table on Host1. Which
entry should be seen in the ARP table on Host1 in order
to gain connectivity to the Internet?
Match the forwarding characteristic to its type. (Not all Picture
options are used.)
Which statement is correct about how a Layer 2 switch Frame forwarding decisions are based on MAC address and port mappings in the
determines how to forward frames? CAM table.
Which statement describes a result after multiple Cisco The broadcast domain expands to all switches.
LAN switches are interconnected?
