CWB 47.1 EXAM | FREQUENTLY TESTED QUESTIONS WITH CORRECT AN-
SWERS | BRAND NEW!
Study online at https://quizlet.com/_jhudw5
1. CSA Standard W47.1 provides the requirements that must be met and ad-
hered to by a company seeking certification.
True or False?: True
2. Certification can be considered as an approval of the products fabricated by
a certificated company?
True or false?!: False
3. What does "class" refer to?
A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
B) Electrode groups
C) a category of welder qualification, e.g., F, H,V or O welding position
D) Fillet and groove we'd combined test plate assemblies: C
4. What does classification refer to?
A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
B) Electrode groups
C) a category of welder qualification, e.g., F, H,V or O welding position
D) Fillet and groove we'd combined test plate assemblies: A
5. What organization administer CSA Standard W47.1
A) there is no administrator
B) Canadian standards association
C) Canadian welding bureau: C
6. The Canadian welding bureau can withdraw a company's certification if the
company is NOT following the requirements of CSA standard W47.1
True or false ?: True
7. How many divisions of certification are specified in CSA Standard W47.1 ?
A) one
B) two
C) three
D) four: C
8. Is a company certified in division 1 required to employ a full time or retain a
part time welding engineer?
A) retain a part time welding engineer
1/8
, CWB 47.1 EXAM | FREQUENTLY TESTED QUESTIONS WITH CORRECT AN-
SWERS | BRAND NEW!
Study online at https://quizlet.com/_jhudw5
B) employ a full time welding engineer
C) no engineer is required
D) employ a full time welding inspector only: B
9. Is a company certified in division 3 required to employ a full time or retain a
part time welding engineer?
A) Employ a full time welding engineer
B) Retain a part time welding engineer
C) retain a part time welding engineer responsible to the company only for
welding procedures and practice
D) No welding engineer is required: D
10. CSA Standard W47.1 requires each designated plant, shop or section to
meet the requirements of certification within this standard with respect to
welders, welding procedures specification, welding procedure data sheets,
welding supervisor and welding engineer, where applicable
True or false?: True
11. A company doing only erection work involving welding must have a pony
in order to be certified to CSA standard W47.1
True or false?: False
12. When must the company inform the Canadian bureau of any loss or change
in welding engineering or supervisory personnel?
A) immediately
B) after 3 months
C) after 6 months
D) the doesn't have to inform as long as the personnel is replaced after a
year: A
13. The company shall designate an individual who, irrespective of each other
responsibilities, shall have defined authority and responsibility for ensuring
that the requirements of CSA Standard W47.1 are implemented and main-
tained
True or false?: True
2/8
SWERS | BRAND NEW!
Study online at https://quizlet.com/_jhudw5
1. CSA Standard W47.1 provides the requirements that must be met and ad-
hered to by a company seeking certification.
True or False?: True
2. Certification can be considered as an approval of the products fabricated by
a certificated company?
True or false?!: False
3. What does "class" refer to?
A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
B) Electrode groups
C) a category of welder qualification, e.g., F, H,V or O welding position
D) Fillet and groove we'd combined test plate assemblies: C
4. What does classification refer to?
A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel.
B) Electrode groups
C) a category of welder qualification, e.g., F, H,V or O welding position
D) Fillet and groove we'd combined test plate assemblies: A
5. What organization administer CSA Standard W47.1
A) there is no administrator
B) Canadian standards association
C) Canadian welding bureau: C
6. The Canadian welding bureau can withdraw a company's certification if the
company is NOT following the requirements of CSA standard W47.1
True or false ?: True
7. How many divisions of certification are specified in CSA Standard W47.1 ?
A) one
B) two
C) three
D) four: C
8. Is a company certified in division 1 required to employ a full time or retain a
part time welding engineer?
A) retain a part time welding engineer
1/8
, CWB 47.1 EXAM | FREQUENTLY TESTED QUESTIONS WITH CORRECT AN-
SWERS | BRAND NEW!
Study online at https://quizlet.com/_jhudw5
B) employ a full time welding engineer
C) no engineer is required
D) employ a full time welding inspector only: B
9. Is a company certified in division 3 required to employ a full time or retain a
part time welding engineer?
A) Employ a full time welding engineer
B) Retain a part time welding engineer
C) retain a part time welding engineer responsible to the company only for
welding procedures and practice
D) No welding engineer is required: D
10. CSA Standard W47.1 requires each designated plant, shop or section to
meet the requirements of certification within this standard with respect to
welders, welding procedures specification, welding procedure data sheets,
welding supervisor and welding engineer, where applicable
True or false?: True
11. A company doing only erection work involving welding must have a pony
in order to be certified to CSA standard W47.1
True or false?: False
12. When must the company inform the Canadian bureau of any loss or change
in welding engineering or supervisory personnel?
A) immediately
B) after 3 months
C) after 6 months
D) the doesn't have to inform as long as the personnel is replaced after a
year: A
13. The company shall designate an individual who, irrespective of each other
responsibilities, shall have defined authority and responsibility for ensuring
that the requirements of CSA Standard W47.1 are implemented and main-
tained
True or false?: True
2/8
