EM 385 1-1 EXAM WITH
CORRECT VERIFIED ANSWERS
for workers with a body weight less than _____ - ANSWER --130lbs
For portable ladders the length of single ladders or individual sections of ladders must not
exceed - ANSWER --30ft
First aid and CPR availability is not - ANSWER --30 minutes
The SSHO must have completed or have the equivalent to __________ - ANSWER --OSHA
20 Constructions or OSHA 20 general Industries
Any equipment that is damaged, malfunctioning or was subjected to a fall must be -
ANSWER --Removed from service and replaced
When Workers will be in or around excavation a competent person must conduct documented
inspections of each excavation, the adjacent areas and protective systems before each work site
and through the work shift as dictated by the work being done and ______ - ANSWER --
When working on a roof points of access materials handling areas and storage areas must ____
- ANSWER --be connected to the work area by a clear access path formed by two warning
lines
, Which of the following does not need to be included in the AHA for hot work - ANSWER --
the number of fire extinguishers within a 500 ft radius of the hot work
When an unqualified person is working in an elevated position near overhead lines with a
normal voltage of 50V or less in a location that allows access from the ground, near enough that
a hazard might exist. What is the minimum clearance distance that must be maintained for the
person and the longest conductive object tool being used - ANSWER --10ft
Toe boards must support a force of at least - ANSWER --50lbs
When employees provide their own safety equipment or PPE the _______ is responsible for
ensuring its adequacy in protecting against hazards - ANSWER --employer
mechanized equipment is intended for use on construction sites and not for operations on
public highways, such mechanized equipment must meet all of the following requirements
except... - ANSWER --
Which of the following properties is not relevant when classifying the locations of electrical
equipment and wiring - ANSWER --
When personnel are required to enter excavations over _____ in depth must have a way to get
in and out for every ______ of horizontal travel - ANSWER --4ft, 25ft
Protection shall be provided to prevent personnel vehicles and equipment from falling into
excavations. What class of perimeter protection is required for excavations exposed to members
of the public, to vehicles or equipment. - ANSWER --Class I
What OSHA form is required to be posted on the SOH bulletin board - ANSWER --300A
CORRECT VERIFIED ANSWERS
for workers with a body weight less than _____ - ANSWER --130lbs
For portable ladders the length of single ladders or individual sections of ladders must not
exceed - ANSWER --30ft
First aid and CPR availability is not - ANSWER --30 minutes
The SSHO must have completed or have the equivalent to __________ - ANSWER --OSHA
20 Constructions or OSHA 20 general Industries
Any equipment that is damaged, malfunctioning or was subjected to a fall must be -
ANSWER --Removed from service and replaced
When Workers will be in or around excavation a competent person must conduct documented
inspections of each excavation, the adjacent areas and protective systems before each work site
and through the work shift as dictated by the work being done and ______ - ANSWER --
When working on a roof points of access materials handling areas and storage areas must ____
- ANSWER --be connected to the work area by a clear access path formed by two warning
lines
, Which of the following does not need to be included in the AHA for hot work - ANSWER --
the number of fire extinguishers within a 500 ft radius of the hot work
When an unqualified person is working in an elevated position near overhead lines with a
normal voltage of 50V or less in a location that allows access from the ground, near enough that
a hazard might exist. What is the minimum clearance distance that must be maintained for the
person and the longest conductive object tool being used - ANSWER --10ft
Toe boards must support a force of at least - ANSWER --50lbs
When employees provide their own safety equipment or PPE the _______ is responsible for
ensuring its adequacy in protecting against hazards - ANSWER --employer
mechanized equipment is intended for use on construction sites and not for operations on
public highways, such mechanized equipment must meet all of the following requirements
except... - ANSWER --
Which of the following properties is not relevant when classifying the locations of electrical
equipment and wiring - ANSWER --
When personnel are required to enter excavations over _____ in depth must have a way to get
in and out for every ______ of horizontal travel - ANSWER --4ft, 25ft
Protection shall be provided to prevent personnel vehicles and equipment from falling into
excavations. What class of perimeter protection is required for excavations exposed to members
of the public, to vehicles or equipment. - ANSWER --Class I
What OSHA form is required to be posted on the SOH bulletin board - ANSWER --300A
