FSVO-TEST ACTUAL EXAM PAPER
2026 QUESTIONS WITH ANSWERS
GRADED A+
◍ corrosion on the battery terminals.
Answer: when doing routine maintenance on a battery, which would need to
be corrected by the driver/operator?
◍ The purpose of using a spotter is to.
Answer: the driver by observing cross traffic the as the area in the blind spot
◍ horizontal and vertical openings, the operator must know: To effectively
judge the ability of a vehicle to pass through areas of restricted.
Answer: vehicle dimensions.
◍ overheating of engine coolant.
Answer: which is a result of over-throttling?
◍ Which driving skill would not require using a spotter?.
Answer: Diminishing clearance
◍ 180.
Answer: the confined space turnaround maneuver allows an operator to turn
the apparatus ______ degrees.
◍ The distance a vehicle travels from the point where you begin recognizing
the hazard until the apparatus comes to a complete stop is called the:.
Answer: total stopping distance.
◍ The confined space turnaround maneuver allows an operator to turn the
apparatus degrees.
Answer: 180
◍ Improper tire pressures may cause.
, Answer: poor handling
◍ One method of performing an apparatus/pretrip inspection is the.
Answer: walk-around method.
◍ Before shutdown the apparatus engine temperature should be allowed to
stabilize by idling it for minutes..
Answer: 3 to 5
◍ Checking for voltage, electrolyte level, and corrosion are all steps in
inspecting:.
Answer: the battery.
◍ maneuvering around parked and stopped vehicles.
Answer: the purpose of the serpentine course is to simulate:
◍ While traveling in the center lane of a multiple-lane highway on an
emergency call, the vehicle in front of you stops. You should:.
Answer: brake to reduce speed and pass on the left side of the vehicle.
◍ The vacuum test requires a reading at the end of 5 minutes with no more
than inches of vacuum being lost..
Answer: 10
◍ used in the initial response to a fire or other incident involving more than
one responding company.
Answer: level 1 staging may be:
◍ When responding to emergencies, the use of warning devices:.
Answer: does not allow the driver to disregard other drivers.
◍ When approaching unguarded railroad crossings, the driver shall:.
Answer: come to a complete stop.
◍ Level I staging may be:.
Answer: used in the initial response to a fire or other incident involving
more than one responding company.
◍ Many accidents involving apparatus are caused by the operator.
, Answer: misunderstanding the capabilities of the apparatus.
◍ assign a spotter.
Answer: because of the size of an apparatus, as well as the clearance needed
when backing, you should:
◍ four.
Answer: how many cones are used during the serpentine driving skill?
◍ washing with automotive shampoo and clean water.
Answer: which method should be used when washing a fire apparatus?
◍ weight transfer.
Answer: one common cause of fire apparatus skidding is:
◍ At a working fire, which apparatus has the highest priority for position?.
Answer: Aerial apparatus
◍ A fire apparatus should be dried:.
Answer: with a clean chamois
◍ You have responded to an emergency on a limited-access highway. Your
apparatus is not being used. You should:.
Answer: use the apparatus as a barrier between the traffic flow and the
responders on scene.
◍ When stopping an apparatus, it is necessary to consider the:.
Answer: A. empty weight of the apparatus. B. length of the apparatus. C.
condition of the brakes. D. height of the apparatus.
◍ When doing routine maintenance on a battery, which would need to be
corrected by the driver/operator?.
Answer: Corrosion on the battery terminals
◍ Which is a result of over-throttling?.
Answer: A. White smoke from the exhaust B. Overheating of engine coolant
C. Loss of power D. Increases torque
◍ 60.
2026 QUESTIONS WITH ANSWERS
GRADED A+
◍ corrosion on the battery terminals.
Answer: when doing routine maintenance on a battery, which would need to
be corrected by the driver/operator?
◍ The purpose of using a spotter is to.
Answer: the driver by observing cross traffic the as the area in the blind spot
◍ horizontal and vertical openings, the operator must know: To effectively
judge the ability of a vehicle to pass through areas of restricted.
Answer: vehicle dimensions.
◍ overheating of engine coolant.
Answer: which is a result of over-throttling?
◍ Which driving skill would not require using a spotter?.
Answer: Diminishing clearance
◍ 180.
Answer: the confined space turnaround maneuver allows an operator to turn
the apparatus ______ degrees.
◍ The distance a vehicle travels from the point where you begin recognizing
the hazard until the apparatus comes to a complete stop is called the:.
Answer: total stopping distance.
◍ The confined space turnaround maneuver allows an operator to turn the
apparatus degrees.
Answer: 180
◍ Improper tire pressures may cause.
, Answer: poor handling
◍ One method of performing an apparatus/pretrip inspection is the.
Answer: walk-around method.
◍ Before shutdown the apparatus engine temperature should be allowed to
stabilize by idling it for minutes..
Answer: 3 to 5
◍ Checking for voltage, electrolyte level, and corrosion are all steps in
inspecting:.
Answer: the battery.
◍ maneuvering around parked and stopped vehicles.
Answer: the purpose of the serpentine course is to simulate:
◍ While traveling in the center lane of a multiple-lane highway on an
emergency call, the vehicle in front of you stops. You should:.
Answer: brake to reduce speed and pass on the left side of the vehicle.
◍ The vacuum test requires a reading at the end of 5 minutes with no more
than inches of vacuum being lost..
Answer: 10
◍ used in the initial response to a fire or other incident involving more than
one responding company.
Answer: level 1 staging may be:
◍ When responding to emergencies, the use of warning devices:.
Answer: does not allow the driver to disregard other drivers.
◍ When approaching unguarded railroad crossings, the driver shall:.
Answer: come to a complete stop.
◍ Level I staging may be:.
Answer: used in the initial response to a fire or other incident involving
more than one responding company.
◍ Many accidents involving apparatus are caused by the operator.
, Answer: misunderstanding the capabilities of the apparatus.
◍ assign a spotter.
Answer: because of the size of an apparatus, as well as the clearance needed
when backing, you should:
◍ four.
Answer: how many cones are used during the serpentine driving skill?
◍ washing with automotive shampoo and clean water.
Answer: which method should be used when washing a fire apparatus?
◍ weight transfer.
Answer: one common cause of fire apparatus skidding is:
◍ At a working fire, which apparatus has the highest priority for position?.
Answer: Aerial apparatus
◍ A fire apparatus should be dried:.
Answer: with a clean chamois
◍ You have responded to an emergency on a limited-access highway. Your
apparatus is not being used. You should:.
Answer: use the apparatus as a barrier between the traffic flow and the
responders on scene.
◍ When stopping an apparatus, it is necessary to consider the:.
Answer: A. empty weight of the apparatus. B. length of the apparatus. C.
condition of the brakes. D. height of the apparatus.
◍ When doing routine maintenance on a battery, which would need to be
corrected by the driver/operator?.
Answer: Corrosion on the battery terminals
◍ Which is a result of over-throttling?.
Answer: A. White smoke from the exhaust B. Overheating of engine coolant
C. Loss of power D. Increases torque
◍ 60.
