ATO2 NAVY ADVANCEMENT UPDATED EXAMS
SCRIPT QUESTIONS AND ANSWERS SURE A+
✔✔To respond to Mode 4 interrogations, the IFF transponder set system requires what
additional components? - ✔✔Transponder Computer KIT-1/TSEC
✔✔What APX-100 system is referred to as the rack-mounted configuration? -
✔✔Receiver/Transmitter RT-1157/APX-100
✔✔Who is responsible for safety? - ✔✔All hands.
✔✔What precaution should you take before removing a fuse? - ✔✔De-energize the
circuit
✔✔What is required for an individual to perform CPR? - ✔✔Certified CPR training
✔✔Where can you find danger areas for a particular aircraft? - ✔✔MIM
✔✔Who should be standing by while working on energized equipment? - ✔✔Someone
qualified to render first aid
✔✔What criterion determines shock intensity? - ✔✔Current
, ✔✔. Which tools should not be etched? - ✔✔Beryllium-copper tools
✔✔What is the preferred extinguishing agent for Class C fires? - ✔✔CO2
✔✔What is the maximum psi of compressed air for cleaning equipment? - ✔✔30
✔✔What are the two broad categories of maintenance? - ✔✔Scheduled and
unscheduled maintenance.
✔✔Scheduled maintenance consists of what type of work? - ✔✔Maintenance
performed to reduce the likelihood of future troubles or malfunctions
✔✔What manual should you refer to for avionics corrosion removal? - ✔✔NAVAIR 16-1-
540
✔✔What is the primary purpose of preventive maintenance? - ✔✔Maintenance
performed to reduce the likelihood of future troubles or malfunctions.
✔✔What is the first step you should take when receiving a discrepancy? - ✔✔Determine
if the equipment in question is actually faulty.
✔✔Describe the use of continuity tests. - ✔✔To check for opens or to see if a circuit is
complete or continuous.
✔✔Describe the major method for testing shorts in transformers, motor windings, and
capacitors - ✔✔Take resistance measurements and compare them with schematics,
MIMs, or identical operational equipment.
✔✔What is the effective method of locating defective stages in electronic equipment? -
✔✔Signal tracing
✔✔Use of improper test probes may result in what? - ✔✔Distorted waveshape of the
observed signal.
✔✔What should be done before making resistance measurements? - ✔✔Ensure no
voltages are present.
✔✔After complete reassembly of equipment, what must be done? - ✔✔Operational
check
✔✔What must you consider when substituting a resistor to ensure it is a proper
substitution? - ✔✔Ohmic value, wattage rating, tolerance, physical dimensions, and
type of construction.
SCRIPT QUESTIONS AND ANSWERS SURE A+
✔✔To respond to Mode 4 interrogations, the IFF transponder set system requires what
additional components? - ✔✔Transponder Computer KIT-1/TSEC
✔✔What APX-100 system is referred to as the rack-mounted configuration? -
✔✔Receiver/Transmitter RT-1157/APX-100
✔✔Who is responsible for safety? - ✔✔All hands.
✔✔What precaution should you take before removing a fuse? - ✔✔De-energize the
circuit
✔✔What is required for an individual to perform CPR? - ✔✔Certified CPR training
✔✔Where can you find danger areas for a particular aircraft? - ✔✔MIM
✔✔Who should be standing by while working on energized equipment? - ✔✔Someone
qualified to render first aid
✔✔What criterion determines shock intensity? - ✔✔Current
, ✔✔. Which tools should not be etched? - ✔✔Beryllium-copper tools
✔✔What is the preferred extinguishing agent for Class C fires? - ✔✔CO2
✔✔What is the maximum psi of compressed air for cleaning equipment? - ✔✔30
✔✔What are the two broad categories of maintenance? - ✔✔Scheduled and
unscheduled maintenance.
✔✔Scheduled maintenance consists of what type of work? - ✔✔Maintenance
performed to reduce the likelihood of future troubles or malfunctions
✔✔What manual should you refer to for avionics corrosion removal? - ✔✔NAVAIR 16-1-
540
✔✔What is the primary purpose of preventive maintenance? - ✔✔Maintenance
performed to reduce the likelihood of future troubles or malfunctions.
✔✔What is the first step you should take when receiving a discrepancy? - ✔✔Determine
if the equipment in question is actually faulty.
✔✔Describe the use of continuity tests. - ✔✔To check for opens or to see if a circuit is
complete or continuous.
✔✔Describe the major method for testing shorts in transformers, motor windings, and
capacitors - ✔✔Take resistance measurements and compare them with schematics,
MIMs, or identical operational equipment.
✔✔What is the effective method of locating defective stages in electronic equipment? -
✔✔Signal tracing
✔✔Use of improper test probes may result in what? - ✔✔Distorted waveshape of the
observed signal.
✔✔What should be done before making resistance measurements? - ✔✔Ensure no
voltages are present.
✔✔After complete reassembly of equipment, what must be done? - ✔✔Operational
check
✔✔What must you consider when substituting a resistor to ensure it is a proper
substitution? - ✔✔Ohmic value, wattage rating, tolerance, physical dimensions, and
type of construction.
