QUESTIONS AND ANSWERS 100% PASS
The lower exposed edge of a wood shingle is called the: - correct answer-Shingle butt
The distance that adjacent shingles overlap each other horizontally is called the: - correct answer-
Sidelap
The distance between exposed edges of overlapping shingles is called the: - correct answer-Exposure
The distance from the lower edge of a top shingle to the upper edge of the shingle in the course imme
diately below it is called: - correct answer-Toplap
The distance from the lower edge of a top shingle to the upper edge of the shingle two courses below i
t is called: - correct answer-Headlap
What is a seal cap? - correct answer-The mortar cap around the top of a chimney
A hip roof slopes in _______ direction(s). - correct answer-4
A gable roof slopes in direction(s). - correctKanswer-2
A mansard roof slopes in direction(s). - correct answer-4
A gambrel roof slopes in direction(s). - correct answer-2
A shed roof slopes in direction(s). - correct answer-1
What type of roof has the most plies? - correct answer-Flat
, Which of the following is a "dead load" on a roof? - correct answer-
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2
Structural membranes and other fixed loads
X2 X2 X2 X2 X2 X2
Which of the following is a "live load" on a roof? - correct answer-Roofers and other personnel
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2
Where asphalt is used, rock is not practical on roofs with a slope greater than: - correct answer-3:12
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2
Ordinary roof coverings may be applied over foam plastic when the foam is separated from the interior
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X
of the building by plywood sheathing at least
2 X2 X2 thick. - correct answer-1/2" X2 X2 X2 X2 X2 X2 X2 X2 X2
When starting a new roof, what would you do first? - correct answer-Check for nailing
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2
When installing a ring-clamp drain on an insulated roof, how do you cut the insulation? -
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2
correct answer-Taper the insulation back at least 18"
X 2 X2 X2 X2 X2 X2 X2 X2
The type of roof to be installed is determined by: - correct answer-Roof slope or pitch
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2
If a roof has a slope of 24:12, what is its angle to the horizontal? - correct answer-60*
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2
Which tool do you use to measure the weather exposure on all types of shingles? - correct answer-
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2
XRoofing hatchet
2 X2
What can a Mini-Mopper™️ be used for? - correct answer-To dispense asphalt
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2
What kind of machine is used to apply felt on a steep slope? - correct answer-Roller-type felt layer
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2
Roller type felt laying machines should be: - correct answer-Locked and stationary on the roof
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2
What is the most common type of fuel used in tar kettles? - correct answer-
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2
LPG (liquified petroleum gas)
X2 X2 X2 X2