ACI Concrete Strength Testing Technician CP-19
Exam | Questions with 100% Correct Answers |
Verified | Latest Update 2026/2027
Save
Practice questions for this set
Learn 1 /7 Study using Learn
Empty, 5
Choose an answer
_____ the pot and recharge with fresh material at intervals to insure that the
1
oldest material in the pot has not been used more than _____ times.
These procedures for capping enable concrete cylinders and cores to meet the
2
standard's requirements for ________ and _________.
A slight twisting action will help eliminate _____ and air _____ when the capping
3
plate is placed onto the mound of the paste.
The purpose of the guide bar or bull's eye level is to ensure that caps remain
4
perpendicular to the axis of the cylinder within 0.5 degrees. True or False?
, Don't know?
Terms in this set (81)
These procedures for capping Planeness, perpendicularity
enable concrete cylinders and
cores to meet the standard's
requirements for ________ and
_________.
Equipment needed for the capping Plates, alignment, melting
process includes capping _____ ,
_____devices, and ______ pots.
Plates for neat cement and high Glass, metal granite or diabase
strength gypsum plaster caps
should be made of _____, _____,
_____ or _____.
Sulfur mortar cap plates should be Metal, Stone
formed against _____ or _____
plates.
The purpose of the guide bar or True
bull's eye level is to ensure that
caps remain perpendicular to the
axis of the cylinder within 0.5
degrees. True or False?
, To avoid accidents during Peripheral heating
reheating of cooled sulfur, use
melting pots that have _____.
The technician should use a stiff Neat cement paste
layer of _____ to cap fresh
concrete cylinders.
Hardened concrete cylinders High-strength gypsum paste, neat cement paste, or
should be capped with _____, sulfur mortar
_____ or _____.
Plaster of paris and mixtures of False
plaster of paris and portland
cement are examples of suitable
high strength plasters. True or
False?
Sulfur mortars and high-strength 35MPa (5000 psi), the cylinder strength
gypsum cement cubes must
demonstrate a minimum
compressive strength of _____ or
___ __, whichever is greater.
The cement paste should be 2,4, settling
applied to the freshly molded
cylinder from _____ to _____ hours
after molding. This is to allow for
_____ of the concrete specimen.
Exam | Questions with 100% Correct Answers |
Verified | Latest Update 2026/2027
Save
Practice questions for this set
Learn 1 /7 Study using Learn
Empty, 5
Choose an answer
_____ the pot and recharge with fresh material at intervals to insure that the
1
oldest material in the pot has not been used more than _____ times.
These procedures for capping enable concrete cylinders and cores to meet the
2
standard's requirements for ________ and _________.
A slight twisting action will help eliminate _____ and air _____ when the capping
3
plate is placed onto the mound of the paste.
The purpose of the guide bar or bull's eye level is to ensure that caps remain
4
perpendicular to the axis of the cylinder within 0.5 degrees. True or False?
, Don't know?
Terms in this set (81)
These procedures for capping Planeness, perpendicularity
enable concrete cylinders and
cores to meet the standard's
requirements for ________ and
_________.
Equipment needed for the capping Plates, alignment, melting
process includes capping _____ ,
_____devices, and ______ pots.
Plates for neat cement and high Glass, metal granite or diabase
strength gypsum plaster caps
should be made of _____, _____,
_____ or _____.
Sulfur mortar cap plates should be Metal, Stone
formed against _____ or _____
plates.
The purpose of the guide bar or True
bull's eye level is to ensure that
caps remain perpendicular to the
axis of the cylinder within 0.5
degrees. True or False?
, To avoid accidents during Peripheral heating
reheating of cooled sulfur, use
melting pots that have _____.
The technician should use a stiff Neat cement paste
layer of _____ to cap fresh
concrete cylinders.
Hardened concrete cylinders High-strength gypsum paste, neat cement paste, or
should be capped with _____, sulfur mortar
_____ or _____.
Plaster of paris and mixtures of False
plaster of paris and portland
cement are examples of suitable
high strength plasters. True or
False?
Sulfur mortars and high-strength 35MPa (5000 psi), the cylinder strength
gypsum cement cubes must
demonstrate a minimum
compressive strength of _____ or
___ __, whichever is greater.
The cement paste should be 2,4, settling
applied to the freshly molded
cylinder from _____ to _____ hours
after molding. This is to allow for
_____ of the concrete specimen.
