CWB Welding Inspector Level 1
Certification Exam | 100% Correctly
Answered and Rated A+|Latest 2026/2027
Guide
Functions of the Inspector
When material is received, it should be inspected to verify its condition.
This includes: (Multiple choice)
Question 1 options:
A) Application requirements.
B) Reviewing invoice cost.
C) Paint coverage.
D) Weathering. - Correct Answer - D) Weathering.
What is a mill test report? (Multiple choice)
Question 2 options:
A) The receipt for the purchased material.
B) A document of detailed chemical and mechanical tests, heat
treatment, and material inspection.
C) A document showing the cost and delivery method of the material.
,D) Documentation showing the certifications of the plant that produced
the material.
- Correct Answer - B) A document of detailed chemical and mechanical
tests, heat treatment, and material inspection.
Suppliers should provide a label that shows the certification status of
electrodes. (True/False) - Correct Answer - True
What type of inspection is used to verify material conformance to a
material specification when traceability is lost? (Multiple choice)
Question 4 options:
A) PMI
B) RT
C) UT
D) MPI - Correct Answer - A) PMI
In a non-conformance program, what colour is used to indicate a product
hold? (Multiple choice)
Question 5 options:
A) Yellow
B) Red
C) Green
D) Blue - Correct Answer - A) Yellow
,Which organization certifies welding electrodes to CSA W48? (Multiple
choice)
Question 6 options:
A) The local government.
B) Consumable manufacturers.
C) The Canadian Welding Bureau.
D) The Canadian Standards Association.
- Correct Answer - C) The Canadian Welding Bureau.
In Canada, who regulates the construction of pressurized systems?
(Multiple choice)
Question 7 options:
A) The compliance agency.
B) ABSA.
C) The jurisdictional authority.
D) The federal government. - Correct Answer - C) The jurisdictional
authority.
For how long is an AWS welder qualification valid? (Multiple choice)
Question 8 options:
A) Two years.
, B) Five years.
C) Indefinitely.
D) Only for the length of project.
- Correct Answer - C) Indefinitely.
In what positions is a class V welder permitted to weld under CSA
W47.1? (Multiple choice)
Question 9 options:
A) Vertical position only.
B) Vertical and flat positions.
C) Vertical, flat, and horizontal positions.
D) Vertical and overhead positions.
- Correct Answer - C) Vertical, flat, and horizontal positions.
In CSA W47.1, how many welder qualification classifications are there?
(Multiple choice)
Question 10 options:
A) None
B) One
C) Three
D) Five - Correct Answer - D) Five
Certification Exam | 100% Correctly
Answered and Rated A+|Latest 2026/2027
Guide
Functions of the Inspector
When material is received, it should be inspected to verify its condition.
This includes: (Multiple choice)
Question 1 options:
A) Application requirements.
B) Reviewing invoice cost.
C) Paint coverage.
D) Weathering. - Correct Answer - D) Weathering.
What is a mill test report? (Multiple choice)
Question 2 options:
A) The receipt for the purchased material.
B) A document of detailed chemical and mechanical tests, heat
treatment, and material inspection.
C) A document showing the cost and delivery method of the material.
,D) Documentation showing the certifications of the plant that produced
the material.
- Correct Answer - B) A document of detailed chemical and mechanical
tests, heat treatment, and material inspection.
Suppliers should provide a label that shows the certification status of
electrodes. (True/False) - Correct Answer - True
What type of inspection is used to verify material conformance to a
material specification when traceability is lost? (Multiple choice)
Question 4 options:
A) PMI
B) RT
C) UT
D) MPI - Correct Answer - A) PMI
In a non-conformance program, what colour is used to indicate a product
hold? (Multiple choice)
Question 5 options:
A) Yellow
B) Red
C) Green
D) Blue - Correct Answer - A) Yellow
,Which organization certifies welding electrodes to CSA W48? (Multiple
choice)
Question 6 options:
A) The local government.
B) Consumable manufacturers.
C) The Canadian Welding Bureau.
D) The Canadian Standards Association.
- Correct Answer - C) The Canadian Welding Bureau.
In Canada, who regulates the construction of pressurized systems?
(Multiple choice)
Question 7 options:
A) The compliance agency.
B) ABSA.
C) The jurisdictional authority.
D) The federal government. - Correct Answer - C) The jurisdictional
authority.
For how long is an AWS welder qualification valid? (Multiple choice)
Question 8 options:
A) Two years.
, B) Five years.
C) Indefinitely.
D) Only for the length of project.
- Correct Answer - C) Indefinitely.
In what positions is a class V welder permitted to weld under CSA
W47.1? (Multiple choice)
Question 9 options:
A) Vertical position only.
B) Vertical and flat positions.
C) Vertical, flat, and horizontal positions.
D) Vertical and overhead positions.
- Correct Answer - C) Vertical, flat, and horizontal positions.
In CSA W47.1, how many welder qualification classifications are there?
(Multiple choice)
Question 10 options:
A) None
B) One
C) Three
D) Five - Correct Answer - D) Five
