NJ Black Seal Exam Preparation Version 3 Newest
With Complete Questions And Correct Detailed
Answers| Brand New Version!!!!!2026/2027
In accordance with ASME CSD-1, where is the installation
of a manually operated remote shutdown switch or circuit
breaker to be located? - ANSWER-Just outside the boiler
room door, unless the door is on the building exterior and
it must be marked for easy identification and installed on
every exit door of the boiler room.
While making a round of your boiler room, the boiler
feedwater pump is making a strange noise. The pump
casing and the temperature of the water has risen above
,normal. What would most likely cause this problem? -
ANSWER-pump cavitation issue
What is the function of a dry pipe in a boiler? - ANSWER-
to remove moisture from the steam drum
What is the heating surface of water-tube, with a diameter
of 3 1/2 inches and a length of 20 feet? - ANSWER-18.32
sq. ft
One mechanical horsepower is equal to: - ANSWER-
33,000 ft-lb/min
, What is the regulation corresponding to boiler, pressure
vessels and refrigeration systems in New Jersey? -
ANSWER-New Jersey Administrative Code (NJAC) 12:90
According to the codes and standards adopted and
incorporated by reference of the boiler pressure vessels
and refrigeration regulations, welded repairs and any
alternations made to the boilers must comply with what? -
ANSWER-The original Code of construction when it was
built
T/F The examining board of the mechanical inspection
bureau of boiler and pressure vessel compliance may
consider an applicant experience of an equivalent amount
With Complete Questions And Correct Detailed
Answers| Brand New Version!!!!!2026/2027
In accordance with ASME CSD-1, where is the installation
of a manually operated remote shutdown switch or circuit
breaker to be located? - ANSWER-Just outside the boiler
room door, unless the door is on the building exterior and
it must be marked for easy identification and installed on
every exit door of the boiler room.
While making a round of your boiler room, the boiler
feedwater pump is making a strange noise. The pump
casing and the temperature of the water has risen above
,normal. What would most likely cause this problem? -
ANSWER-pump cavitation issue
What is the function of a dry pipe in a boiler? - ANSWER-
to remove moisture from the steam drum
What is the heating surface of water-tube, with a diameter
of 3 1/2 inches and a length of 20 feet? - ANSWER-18.32
sq. ft
One mechanical horsepower is equal to: - ANSWER-
33,000 ft-lb/min
, What is the regulation corresponding to boiler, pressure
vessels and refrigeration systems in New Jersey? -
ANSWER-New Jersey Administrative Code (NJAC) 12:90
According to the codes and standards adopted and
incorporated by reference of the boiler pressure vessels
and refrigeration regulations, welded repairs and any
alternations made to the boilers must comply with what? -
ANSWER-The original Code of construction when it was
built
T/F The examining board of the mechanical inspection
bureau of boiler and pressure vessel compliance may
consider an applicant experience of an equivalent amount
