NYCHA SuperviSor pAiNter WritteN exAm – Complete prACtiCe teSt exAm
||||queStioNS ANd ANSWerS WitH rAtioNAleS/grAded A+/2026 updAte/100%
CorreCt /iNStANt doWNloAd
SECTION 1: PAINT MATERIALS & SELECTION (Questions 1-20)
**Question 1**
Which paint type provides the best resistance to repeated scrubbing in NYCHA
hallways?
A) Flat latex
B) Eggshell acrylic
C) Semi-gloss latex
D) Chalk paint
**Answer:** C) Semi-gloss latex
**Rationale:** Semi-gloss latex forms a hard, durable film that withstands frequent
washing and resists scuffing. Flat paint absorbs dirt and shows marks easily; eggshell is
less scrubbable; chalk paint is not durable for high-traffic areas .
---
**Question 2**
What is the primary binder in high-quality latex paint used by NYCHA?
A) Linseed oil
B) Alkyd resin
,C) Acrylic resin
D) Epoxy
**Answer:** C) Acrylic resin
**Rationale:** Acrylic resin provides superior durability, UV resistance, and flexibility
compared to vinyl. Water-based latex paints use acrylic or vinyl binders. Linseed oil and
alkyd are oil-based; epoxy is a separate chemical family .
---
**Question 3**
You need to specify paint for a NYCHA basement floor that receives light foot traffic.
What is the best choice?
A) Flat latex
B) Epoxy paint
C) Chalk paint
D) Acrylic craft paint
**Answer:** B) Epoxy paint
**Rationale:** Epoxy is chemically cured, providing a hard, abrasion-resistant surface
that can handle foot traffic and moisture. Standard latex or acrylic paints would wear
quickly on a floor .
---
**Question 4**
,Which primer is essential for covering severe water stains on a NYCHA ceiling (e.g., from
a leaking roof)?
A) Latex primer
B) Shellac-based primer
C) PVA primer
D) Bonding primer
**Answer:** B) Shellac-based primer
**Rationale:** Shellac primer is the only universal sealer that completely blocks tannin
and water stains without bleeding through. Oil-based may work, but shellac is superior
for severe stains .
---
**Question 5**
What is the VOC limit for compliant paint used inside NYCHA buildings (per NYC Local
Law 47)?
A) 50 g/L
B) 100 g/L for flat, 150 g/L for non-flat
C) 250 g/L
D) 500 g/L
**Answer:** B) 100 g/L for flat, 150 g/L for non-flat
**Rationale:** Local Law 47 limits VOCs: 100 g/L for flat paint, 150 g/L for non-flat
(eggshell, satin, semi-gloss). 250/500 exceed legal limits .
, ---
**Question 6**
Which paint type is most appropriate for bathrooms and other high-moisture areas in
NYCHA buildings?
A) Flat latex
B) Flat oil paint
C) Semi-gloss latex
D) Chalk paint
**Answer:** C) Semi-gloss latex
**Rationale:** Semi-gloss latex resists moisture and is easier to clean in damp
environments. Flat paints absorb moisture and are prone to mildew. Bathrooms require
moisture-resistant paint with mildewcide additives .
---
**Question 7**
What is the correct paint for radiators in NYCHA buildings?
A) Latex wall paint
B) High-heat enamel (rated 200°F+)
C) Epoxy floor paint
D) Acrylic craft paint
**Answer:** B) High-heat enamel (rated 200°F+)
||||queStioNS ANd ANSWerS WitH rAtioNAleS/grAded A+/2026 updAte/100%
CorreCt /iNStANt doWNloAd
SECTION 1: PAINT MATERIALS & SELECTION (Questions 1-20)
**Question 1**
Which paint type provides the best resistance to repeated scrubbing in NYCHA
hallways?
A) Flat latex
B) Eggshell acrylic
C) Semi-gloss latex
D) Chalk paint
**Answer:** C) Semi-gloss latex
**Rationale:** Semi-gloss latex forms a hard, durable film that withstands frequent
washing and resists scuffing. Flat paint absorbs dirt and shows marks easily; eggshell is
less scrubbable; chalk paint is not durable for high-traffic areas .
---
**Question 2**
What is the primary binder in high-quality latex paint used by NYCHA?
A) Linseed oil
B) Alkyd resin
,C) Acrylic resin
D) Epoxy
**Answer:** C) Acrylic resin
**Rationale:** Acrylic resin provides superior durability, UV resistance, and flexibility
compared to vinyl. Water-based latex paints use acrylic or vinyl binders. Linseed oil and
alkyd are oil-based; epoxy is a separate chemical family .
---
**Question 3**
You need to specify paint for a NYCHA basement floor that receives light foot traffic.
What is the best choice?
A) Flat latex
B) Epoxy paint
C) Chalk paint
D) Acrylic craft paint
**Answer:** B) Epoxy paint
**Rationale:** Epoxy is chemically cured, providing a hard, abrasion-resistant surface
that can handle foot traffic and moisture. Standard latex or acrylic paints would wear
quickly on a floor .
---
**Question 4**
,Which primer is essential for covering severe water stains on a NYCHA ceiling (e.g., from
a leaking roof)?
A) Latex primer
B) Shellac-based primer
C) PVA primer
D) Bonding primer
**Answer:** B) Shellac-based primer
**Rationale:** Shellac primer is the only universal sealer that completely blocks tannin
and water stains without bleeding through. Oil-based may work, but shellac is superior
for severe stains .
---
**Question 5**
What is the VOC limit for compliant paint used inside NYCHA buildings (per NYC Local
Law 47)?
A) 50 g/L
B) 100 g/L for flat, 150 g/L for non-flat
C) 250 g/L
D) 500 g/L
**Answer:** B) 100 g/L for flat, 150 g/L for non-flat
**Rationale:** Local Law 47 limits VOCs: 100 g/L for flat paint, 150 g/L for non-flat
(eggshell, satin, semi-gloss). 250/500 exceed legal limits .
, ---
**Question 6**
Which paint type is most appropriate for bathrooms and other high-moisture areas in
NYCHA buildings?
A) Flat latex
B) Flat oil paint
C) Semi-gloss latex
D) Chalk paint
**Answer:** C) Semi-gloss latex
**Rationale:** Semi-gloss latex resists moisture and is easier to clean in damp
environments. Flat paints absorb moisture and are prone to mildew. Bathrooms require
moisture-resistant paint with mildewcide additives .
---
**Question 7**
What is the correct paint for radiators in NYCHA buildings?
A) Latex wall paint
B) High-heat enamel (rated 200°F+)
C) Epoxy floor paint
D) Acrylic craft paint
**Answer:** B) High-heat enamel (rated 200°F+)
