Which device do you use to measure voltage? - ANSWER-Multi Meter
If you were asked to check out the I/O card on a plc, which card would you look at? -
ANSWER-Input Card
What does the term current refer to while dealing with electricity? - ANSWER-Amps
On a hydraulic pump if you were told the pump is cavitating, what would you check for?
- ANSWER-Low fluid in the tank
In a 480 volt three phase system, what would your meter read if you went from one leg
to ground? - ANSWER-277
WHICH TOOL IS USED WHEN MEASURING SCREW PITCH - ANSWER-Thread
Gauge
What is a circuit breaker? - ANSWER-an automatically operated electrical switch
designed to protect an electrical circuit from damage caused by overload or short circuit.
What does a D.P.S.T. switch refer to? - ANSWER-double pole single throw
How many teeth are on a 40B12 sprocket? - ANSWER-12
The BCD equivalent of 1247 converts to_____. - ANSWER-0001 0010 0100 0111
What is the binary value of the following terms: Word and Nibble - ANSWER-16 digit and
4 digit
What type of programming is used by PLCs. - ANSWER-ladder logic
What is the Octal and Hexadecimal= 0-9,A,B,C,D,E,F equivalent for the decimal
numbers 1-15 - ANSWER-0-7, 10-17, 20... and 0-9,A,B,C,D,E,F
Typical BCD input devices include ____. - ANSWER-thumbwheel switches
BCD code stands for _____. - ANSWER-binary coded decimal
The decimal 1000 has a Weighted Value Position of ______. - ANSWER-3
If you were asked to check out the I/O card on a plc, which card would you look at? -
ANSWER-Input Card
What does the term current refer to while dealing with electricity? - ANSWER-Amps
On a hydraulic pump if you were told the pump is cavitating, what would you check for?
- ANSWER-Low fluid in the tank
In a 480 volt three phase system, what would your meter read if you went from one leg
to ground? - ANSWER-277
WHICH TOOL IS USED WHEN MEASURING SCREW PITCH - ANSWER-Thread
Gauge
What is a circuit breaker? - ANSWER-an automatically operated electrical switch
designed to protect an electrical circuit from damage caused by overload or short circuit.
What does a D.P.S.T. switch refer to? - ANSWER-double pole single throw
How many teeth are on a 40B12 sprocket? - ANSWER-12
The BCD equivalent of 1247 converts to_____. - ANSWER-0001 0010 0100 0111
What is the binary value of the following terms: Word and Nibble - ANSWER-16 digit and
4 digit
What type of programming is used by PLCs. - ANSWER-ladder logic
What is the Octal and Hexadecimal= 0-9,A,B,C,D,E,F equivalent for the decimal
numbers 1-15 - ANSWER-0-7, 10-17, 20... and 0-9,A,B,C,D,E,F
Typical BCD input devices include ____. - ANSWER-thumbwheel switches
BCD code stands for _____. - ANSWER-binary coded decimal
The decimal 1000 has a Weighted Value Position of ______. - ANSWER-3
