NYC Electrician Exam with Actual Complete Questions and Correct
Verified Answer with Detailed Rationales Already Graded A+ |
2026/2027 Updated
The value of current, time, or both at which an adjustable circuit breaker is set to trip is known
as?
A) Inverse time
B) Ampacity
C) Automatic
D) Setting - ANSWER✔✨-D) Setting.
Art. 100 Definitions
The cross-sectional area of three or more THW conductors in a conduit must not exceed what
percent of the cross-sectional area of the conduit?
A) 30%
B) 40%
C) 50%
D) 60% - ANSWER✔✨-B) 40 %
Chapter 9 Table 1
EMT must be supported within what distance from an outlet box, junction box, device box,
cabinet, conduit body or other terminations?
,A) 3 feet
B) 4 feet
C) 5 feet
D) 6 feet - ANSWER✔✨-A) 3 feet
Article 358.30 (A)
When a branch circuit feeds both noncontinuous and continuous loads, the circuit must be sized
to accommodate 100% of the noncontinuous load plus what percent of the continuous load?
A) 110%
B) 115%
C) 120 %
D) 125% - ANSWER✔✨-D) 125%
Article. 210.20 (A)
What is the allowable Ampacity of a 600 MCM copper conductor type TW?
A) 300 Amps
B) 350 Amps
C) 355 Amps
D) 400 Amps - ANSWER✔✨-B) 350 Amps
, Table- 310.16
The name given to a system or circuit conductor that is intentionally grounded is?
A) Grounding Conductor
B) Bonding Conductor
C) High-leg conductor
D) Grounded or neutral conductor - ANSWER✔✨-D) Grounded or Neutral Conductor
Article 100 Definitions
The panels of switchboards must be made of?
A) Moisture resistant, noncombustible material
B) Raintight material
C) Impact-resistant material
D) Waterproof material - ANSWER✔✨-A) Moisture-resistant, noncombustible material
Article 408.50
A metal pole supporting a light fixture shall have an accessible handhole not less than ________
inches?
A) 2 X 6 inches
B) 3 X 4 inches
C) 2 X 4 inches
Verified Answer with Detailed Rationales Already Graded A+ |
2026/2027 Updated
The value of current, time, or both at which an adjustable circuit breaker is set to trip is known
as?
A) Inverse time
B) Ampacity
C) Automatic
D) Setting - ANSWER✔✨-D) Setting.
Art. 100 Definitions
The cross-sectional area of three or more THW conductors in a conduit must not exceed what
percent of the cross-sectional area of the conduit?
A) 30%
B) 40%
C) 50%
D) 60% - ANSWER✔✨-B) 40 %
Chapter 9 Table 1
EMT must be supported within what distance from an outlet box, junction box, device box,
cabinet, conduit body or other terminations?
,A) 3 feet
B) 4 feet
C) 5 feet
D) 6 feet - ANSWER✔✨-A) 3 feet
Article 358.30 (A)
When a branch circuit feeds both noncontinuous and continuous loads, the circuit must be sized
to accommodate 100% of the noncontinuous load plus what percent of the continuous load?
A) 110%
B) 115%
C) 120 %
D) 125% - ANSWER✔✨-D) 125%
Article. 210.20 (A)
What is the allowable Ampacity of a 600 MCM copper conductor type TW?
A) 300 Amps
B) 350 Amps
C) 355 Amps
D) 400 Amps - ANSWER✔✨-B) 350 Amps
, Table- 310.16
The name given to a system or circuit conductor that is intentionally grounded is?
A) Grounding Conductor
B) Bonding Conductor
C) High-leg conductor
D) Grounded or neutral conductor - ANSWER✔✨-D) Grounded or Neutral Conductor
Article 100 Definitions
The panels of switchboards must be made of?
A) Moisture resistant, noncombustible material
B) Raintight material
C) Impact-resistant material
D) Waterproof material - ANSWER✔✨-A) Moisture-resistant, noncombustible material
Article 408.50
A metal pole supporting a light fixture shall have an accessible handhole not less than ________
inches?
A) 2 X 6 inches
B) 3 X 4 inches
C) 2 X 4 inches
