CHIMNEY SAFETY INSTITUTE OF AMERICA
Professional Certification Program
CSIA FINAL EXAM
VERSION 1
Questions and Answers
Exam Overview
Total Questions: 130
Format: Multiple Choice (A, B, C, D)
Answers included after each question
Study guide for CSIA Certified Chimney Sweep examination preparation.
All answers reflect standard industry knowledge and NFPA 211 guidelines.
CSIA | Certified Chimney Sweep | Final Examination Preparation
,CSIA Final Exam — Version 1 Questions & Answers
EXAMINATION QUESTIONS AND ANSWERS
Q1 If you encounter a down drafting chimney, you should NOT:
A) open doors and windows in the home
B) ask the homeowner to turn off air conditioners and fans
C) seal the face of the opening
D) insert the vacuum hose
✓ ANSWER: B) ask the homeowner to turn off air conditioners and fans
Q2 Utilize some type of protective sleeve around ____ rods to prevent becoming
entangled.
A) fiberglass
B) spinning
C) rattan
D) metal
✓ ANSWER: B) spinning
Q3 Barometric dampers are used to:
A) prevent excessive draft in appliances
B) reduce flow
C) minimize the stack effect
D) eliminate wind induced downdraft
✓ ANSWER: A) Prevent excessive draft in appliances
Q4 A catalytic combustor works to lower the ignition temperature of the escaping
gases to approximately:
A) 212°F
B) 500°F
C) 1100°F
D) 1700°F
✓ ANSWER: B) 500°F
Page 2
,CSIA Final Exam — Version 1 Questions & Answers
Q5 Position the base of the ladder 1 foot from the building for every ____ feet of
vertical height between the base and the roof contact point.
A) 1
B) 2
C) 3
D) 4
✓ ANSWER: D) 4
Q6 What does readily accessible areas mean in the chimney inspection process?
A) areas that can be reached for inspection or maintenance without the use of tools or
ladders.
B) areas that are assessable when panels are removed
C) areas that can easily be opened, removed, or destroyed for inspection purposes
D) inspections that can easily be performed using roof access and safety gear
✓ ANSWER: A) areas that can be reached for inspection or maintenance without the
use of tools or ladders
Q7 Buckled interior baffles on a woodstove can:
A) admit access air
B) eliminate a flow reversal
C) inhibit the flow of gases out of the stove
D) reduce emissions
✓ ANSWER: C) inhibit the flow of gases out of the stove
Q8 What level of inspection is required every time you sweep a chimney?
A) Level I
B) Level II
C) Level III
D) Level IV
✓ ANSWER: A) Level I
Q9 The standard for solid fuel type room heaters is:
A) UL 103
B) UL 1482
C) UL 1777
D) UL 737
✓ ANSWER: B) UL 1482
Page 3
, CSIA Final Exam — Version 1 Questions & Answers
Q1 The standard for factory built chimneys is:
0
A) UL 103
B) UL 127
C) UL 441
D) UL 641
✓ ANSWER: A) UL 103
Q1 The combustion process is referred to as the:
1
A) fire triangle
B) fire pyramid
C) square fire theory
D) fire tetrahedron
✓ ANSWER: D) fire tetrahedron
Q1 Which of the following is a factor leading to greater creosote accumulation?
2
A) higher smoke density
B) better insulated chimneys
C) smaller flues
D) smaller fuel loads
✓ ANSWER: A) higher smoke density
Q1 At a minimum how much higher does a chimney need to be than any point
3 within 10 feet of the chimney?
A) 12 inches
B) 24 inches
C) 36 inches
D) 48 inches
✓ ANSWER: B) 24 inches
Page 4
Professional Certification Program
CSIA FINAL EXAM
VERSION 1
Questions and Answers
Exam Overview
Total Questions: 130
Format: Multiple Choice (A, B, C, D)
Answers included after each question
Study guide for CSIA Certified Chimney Sweep examination preparation.
All answers reflect standard industry knowledge and NFPA 211 guidelines.
CSIA | Certified Chimney Sweep | Final Examination Preparation
,CSIA Final Exam — Version 1 Questions & Answers
EXAMINATION QUESTIONS AND ANSWERS
Q1 If you encounter a down drafting chimney, you should NOT:
A) open doors and windows in the home
B) ask the homeowner to turn off air conditioners and fans
C) seal the face of the opening
D) insert the vacuum hose
✓ ANSWER: B) ask the homeowner to turn off air conditioners and fans
Q2 Utilize some type of protective sleeve around ____ rods to prevent becoming
entangled.
A) fiberglass
B) spinning
C) rattan
D) metal
✓ ANSWER: B) spinning
Q3 Barometric dampers are used to:
A) prevent excessive draft in appliances
B) reduce flow
C) minimize the stack effect
D) eliminate wind induced downdraft
✓ ANSWER: A) Prevent excessive draft in appliances
Q4 A catalytic combustor works to lower the ignition temperature of the escaping
gases to approximately:
A) 212°F
B) 500°F
C) 1100°F
D) 1700°F
✓ ANSWER: B) 500°F
Page 2
,CSIA Final Exam — Version 1 Questions & Answers
Q5 Position the base of the ladder 1 foot from the building for every ____ feet of
vertical height between the base and the roof contact point.
A) 1
B) 2
C) 3
D) 4
✓ ANSWER: D) 4
Q6 What does readily accessible areas mean in the chimney inspection process?
A) areas that can be reached for inspection or maintenance without the use of tools or
ladders.
B) areas that are assessable when panels are removed
C) areas that can easily be opened, removed, or destroyed for inspection purposes
D) inspections that can easily be performed using roof access and safety gear
✓ ANSWER: A) areas that can be reached for inspection or maintenance without the
use of tools or ladders
Q7 Buckled interior baffles on a woodstove can:
A) admit access air
B) eliminate a flow reversal
C) inhibit the flow of gases out of the stove
D) reduce emissions
✓ ANSWER: C) inhibit the flow of gases out of the stove
Q8 What level of inspection is required every time you sweep a chimney?
A) Level I
B) Level II
C) Level III
D) Level IV
✓ ANSWER: A) Level I
Q9 The standard for solid fuel type room heaters is:
A) UL 103
B) UL 1482
C) UL 1777
D) UL 737
✓ ANSWER: B) UL 1482
Page 3
, CSIA Final Exam — Version 1 Questions & Answers
Q1 The standard for factory built chimneys is:
0
A) UL 103
B) UL 127
C) UL 441
D) UL 641
✓ ANSWER: A) UL 103
Q1 The combustion process is referred to as the:
1
A) fire triangle
B) fire pyramid
C) square fire theory
D) fire tetrahedron
✓ ANSWER: D) fire tetrahedron
Q1 Which of the following is a factor leading to greater creosote accumulation?
2
A) higher smoke density
B) better insulated chimneys
C) smaller flues
D) smaller fuel loads
✓ ANSWER: A) higher smoke density
Q1 At a minimum how much higher does a chimney need to be than any point
3 within 10 feet of the chimney?
A) 12 inches
B) 24 inches
C) 36 inches
D) 48 inches
✓ ANSWER: B) 24 inches
Page 4
