NCCER/OSHA SCAFFOLD SG EXAM (2026) UPDATE VERIFIED
QUESTIONS AND ANSWERS | WITH 100% CORRECT ANSWERS
GRADED A+ GUARANTEED SUCCESS!!
1. The footing or anchorage for scaffolds must be capable of carrying the
maximum intended load without:
Answer: tying or guying
2. Erectors of a scaffold who exposed to potential falling object hazards shall
be provided with:
Answer: overhead protection
3. OSHA requires a rest landing at intervals not exceed:
Answer: 35 feet
4. The top handrail of a scaffold must be able to withstand how many pounds
of pressure?
Answer: 200
5. When building a scaffold inside a "goggle area":
Answer: everyone inside the area must wear goggles
6. The ladder should be located on a mobile scaffold will not:
Answer: tip over
7. When should ties be installed?
Answer: during the erection process
8. What body produces the primary code or regulations guiding the
scaffolding industry?
Answer: OSHA (Occupational Safety and Health Agency)
9. What should be used to erect scaffolding on uneven ground?
Answer: leveling jacks
, 10.OSHA specifically prohibits the use of:
Answer: lean to scaffolds
11.Boards or wooden pad placed on the soil to support scaffold legs are:
Answer: mudsills
12.The tube of a tube and clamp scaffold is normally what size O.D.?
Answer: 1.9 inches
13.Scaffold decks that overlap a minimum of how many inches, unless secured
in some other way?
Answer: 12
14.The bearer in a tube and clamp scaffold is always:
Answer: placed above the adjacent runner
15.What must a rolling scaffold have on each caster or roller?
Answer: positive locking device
16.Who must inspect a scaffold each work shift and after any occurrence which
could affect a scaffold's structural integrity?
Answer: competent person
17.What is the minimum tensile strength of D-rings and snap hooks on a safety
harness?
Answer: 5,000 pounds
18.What part of the picture is identified by the letter "G"?
Answer: sill or mudsill
19.What part of the scaffold is identified by letter "A"?
Answer: guardrail
20.What part of the scaffold is identified by the letter "C"?
Answer: runner
21.What part of the scaffold is identified by the letter "F"?
Answer: base plate
QUESTIONS AND ANSWERS | WITH 100% CORRECT ANSWERS
GRADED A+ GUARANTEED SUCCESS!!
1. The footing or anchorage for scaffolds must be capable of carrying the
maximum intended load without:
Answer: tying or guying
2. Erectors of a scaffold who exposed to potential falling object hazards shall
be provided with:
Answer: overhead protection
3. OSHA requires a rest landing at intervals not exceed:
Answer: 35 feet
4. The top handrail of a scaffold must be able to withstand how many pounds
of pressure?
Answer: 200
5. When building a scaffold inside a "goggle area":
Answer: everyone inside the area must wear goggles
6. The ladder should be located on a mobile scaffold will not:
Answer: tip over
7. When should ties be installed?
Answer: during the erection process
8. What body produces the primary code or regulations guiding the
scaffolding industry?
Answer: OSHA (Occupational Safety and Health Agency)
9. What should be used to erect scaffolding on uneven ground?
Answer: leveling jacks
, 10.OSHA specifically prohibits the use of:
Answer: lean to scaffolds
11.Boards or wooden pad placed on the soil to support scaffold legs are:
Answer: mudsills
12.The tube of a tube and clamp scaffold is normally what size O.D.?
Answer: 1.9 inches
13.Scaffold decks that overlap a minimum of how many inches, unless secured
in some other way?
Answer: 12
14.The bearer in a tube and clamp scaffold is always:
Answer: placed above the adjacent runner
15.What must a rolling scaffold have on each caster or roller?
Answer: positive locking device
16.Who must inspect a scaffold each work shift and after any occurrence which
could affect a scaffold's structural integrity?
Answer: competent person
17.What is the minimum tensile strength of D-rings and snap hooks on a safety
harness?
Answer: 5,000 pounds
18.What part of the picture is identified by the letter "G"?
Answer: sill or mudsill
19.What part of the scaffold is identified by letter "A"?
Answer: guardrail
20.What part of the scaffold is identified by the letter "C"?
Answer: runner
21.What part of the scaffold is identified by the letter "F"?
Answer: base plate
