NICET LEVEL 1 STUDY GUIDE QUESTIONS
COMPREHENSIVE SCRIPT 2026 COMPLETE
QUESTIONS AND SOLUTIONS GRADED A+
⩥ Consider a series circuit with 2 resistors. R1 = 1,000 ohms and R2 =
10 ohms. The total resistance of the circuit is____? Answer: 1,010 ohms
⩥ A pathway shall be designated as Class ____ when it does not include
a redundant path and operational capability stops at a single open and
operational capability is maintained during the application of a single
ground fault? Answer: Class B
⩥ EMT shall be securely fastened in place at least every ___ feet.
Answer: 10 feet
⩥ For the purposes of alarm annunciation each__ of the building shall be
considered as a separate zone? Answer: Floor
⩥ Consider a series circuit where E= 3 volts, and R= 3 ohms. The
current is ___ amps? Answer: 1 amps
⩥ Equipment shall be designed so that it is capable of performing its
intended function at ___% of its nameplate voltage. Answer: 85 %
, ⩥ What is the required overcurrent protection for an NPLFA circuit
using 16 gauge wire? Answer: 10 amps
⩥ Consider the use of a multimeter in troubleshooting a fire alarm
circuit. The circuit has an end of the line resistor with a value of
4.7ohms. With the circuit disconnected from power, the positive leg of a
fire alarm circuit is metered to a known ground with the meter set to the
10kohm setting. Consider that the circuit is properly functioning. The
expected reading on the multimeter is___ ohms? Answer: Infinity
⩥ Including new systems and addition or alterations to existing systems,
which of the following is not required to be delivered to the owner upon
final acceptance of the system? Answer: Inspection & Testing records,
Central station history log
⩥ According to NFPA 72, section__of the record of completion is used
to note the input voltage? Answer: Section 5.1.11
⩥ Which of the following is not one of the criteria to be a designated a
confined space? Answer: A room that locks when the door is closed.
⩥ According to NFPA 72 the onsite location of the required record
documents and specific software is notes in section ______of the Record
of Completion? Answer: Section 3
COMPREHENSIVE SCRIPT 2026 COMPLETE
QUESTIONS AND SOLUTIONS GRADED A+
⩥ Consider a series circuit with 2 resistors. R1 = 1,000 ohms and R2 =
10 ohms. The total resistance of the circuit is____? Answer: 1,010 ohms
⩥ A pathway shall be designated as Class ____ when it does not include
a redundant path and operational capability stops at a single open and
operational capability is maintained during the application of a single
ground fault? Answer: Class B
⩥ EMT shall be securely fastened in place at least every ___ feet.
Answer: 10 feet
⩥ For the purposes of alarm annunciation each__ of the building shall be
considered as a separate zone? Answer: Floor
⩥ Consider a series circuit where E= 3 volts, and R= 3 ohms. The
current is ___ amps? Answer: 1 amps
⩥ Equipment shall be designed so that it is capable of performing its
intended function at ___% of its nameplate voltage. Answer: 85 %
, ⩥ What is the required overcurrent protection for an NPLFA circuit
using 16 gauge wire? Answer: 10 amps
⩥ Consider the use of a multimeter in troubleshooting a fire alarm
circuit. The circuit has an end of the line resistor with a value of
4.7ohms. With the circuit disconnected from power, the positive leg of a
fire alarm circuit is metered to a known ground with the meter set to the
10kohm setting. Consider that the circuit is properly functioning. The
expected reading on the multimeter is___ ohms? Answer: Infinity
⩥ Including new systems and addition or alterations to existing systems,
which of the following is not required to be delivered to the owner upon
final acceptance of the system? Answer: Inspection & Testing records,
Central station history log
⩥ According to NFPA 72, section__of the record of completion is used
to note the input voltage? Answer: Section 5.1.11
⩥ Which of the following is not one of the criteria to be a designated a
confined space? Answer: A room that locks when the door is closed.
⩥ According to NFPA 72 the onsite location of the required record
documents and specific software is notes in section ______of the Record
of Completion? Answer: Section 3
