FLORIDA FIRE OFFICER 2 FINAL
EVALUATION 2026 TESTED QUESTIONS
GRADED A+
⩥ Time, owner resistance, and ____________________ are factors that
hinder the collection of data during a fire inspection.
Answer: proprietary information
⩥ Which type of code applies to existing buildings?
Answer: Fire codes
⩥ At the local level, fire and safety codes are enacted by
Answer: Ordinance
⩥ A code developed by a standards-developing organization that is made
available for adoption by authorities having jurisdiction is a(n)
__________.
Answer: model code
⩥ Which of the following is one of the three primary components of
water-based fire protection system
Answer: Fire pump
,⩥ Which type of sprinkler system is used when there is a potential for
freezing temperatures to affect the system
Answer: Dry-pipe
⩥ Which class of standpipe system is intended solely for use by
firefighters?
Answer: Class One
⩥ which type of special extinguishing system is used to protect gasoline
storage tanks?
Answer: Foam
⩥ The purpose of conducting fire inspections is to identify hazards that
exist and to ensure...
Answer: violations are corrected
⩥ Which construction type results in the most durable and lasting
structures?
Answer: Type IV
⩥ Which type of construction is known as limited combustible
(ordinary)?
Answer: Type III
, ⩥ A restaurant is an example of which type of occupancy
Answer: Assembly
⩥ A retail store is an example of which type of occupancy?
Answer: mercantile
⩥ What does the blue field on an NFPA 704 symbol represent?
Answer: Health
⩥ On an NFPA 704 symbol, which number represents the highest
hazard?
Answer: 4
⩥ When conducting a fire inspection, where should the inspection
begin?
Answer: At the exterior of the building
⩥ When a life-threatening hazard is discovered during an inspection,
correction must occur...
Answer: immediately
⩥ When non-life threatening hazards cause failure of an inspection, a
follow-up inspection should be conducted within _____ days
EVALUATION 2026 TESTED QUESTIONS
GRADED A+
⩥ Time, owner resistance, and ____________________ are factors that
hinder the collection of data during a fire inspection.
Answer: proprietary information
⩥ Which type of code applies to existing buildings?
Answer: Fire codes
⩥ At the local level, fire and safety codes are enacted by
Answer: Ordinance
⩥ A code developed by a standards-developing organization that is made
available for adoption by authorities having jurisdiction is a(n)
__________.
Answer: model code
⩥ Which of the following is one of the three primary components of
water-based fire protection system
Answer: Fire pump
,⩥ Which type of sprinkler system is used when there is a potential for
freezing temperatures to affect the system
Answer: Dry-pipe
⩥ Which class of standpipe system is intended solely for use by
firefighters?
Answer: Class One
⩥ which type of special extinguishing system is used to protect gasoline
storage tanks?
Answer: Foam
⩥ The purpose of conducting fire inspections is to identify hazards that
exist and to ensure...
Answer: violations are corrected
⩥ Which construction type results in the most durable and lasting
structures?
Answer: Type IV
⩥ Which type of construction is known as limited combustible
(ordinary)?
Answer: Type III
, ⩥ A restaurant is an example of which type of occupancy
Answer: Assembly
⩥ A retail store is an example of which type of occupancy?
Answer: mercantile
⩥ What does the blue field on an NFPA 704 symbol represent?
Answer: Health
⩥ On an NFPA 704 symbol, which number represents the highest
hazard?
Answer: 4
⩥ When conducting a fire inspection, where should the inspection
begin?
Answer: At the exterior of the building
⩥ When a life-threatening hazard is discovered during an inspection,
correction must occur...
Answer: immediately
⩥ When non-life threatening hazards cause failure of an inspection, a
follow-up inspection should be conducted within _____ days
