ASNT Level III Basic Exam Study Guide & Advanced NDT Theory Revision Notes
SNT-TC-1A is not intended to be used as a strict specification. - correct answer ✔✔Which of the
following statements is true concerning the usage of SNT-TC-1A?
Written and stated in general terms - correct answer ✔✔The SNT-TC-1A Interpretation Panel
will respond to inquiries about SNT-TC-1A. The inquiry must be:
May engage an outside service but is, nevertheless, responsible for the certification of the
company's NDT personnel - correct answer ✔✔With regard to the training of NDT personnel,
the employer:
To establish their own written practice for the qualification and certification of their NDT
personnel - correct answer ✔✔SNT-TC-1A is intended as a guideline for employers:
The employer should review the detailed recommendations and modify them, as necessary, to
meet its particular needs. - correct answer ✔✔The following is a statement in SNT-TC-1A "It is
recognized that these guidelines may not be appropriate for certain employers; circumstances
and / or applications." What should be done if the guidelines are not appropriate?
The individual's employer. - correct answer ✔✔Who should be responsible to assess whether or
not an individual should be qualified and certified who does not perform NDT, but monitors and
evaluates NDT?
Holographic testing - correct answer ✔✔To which of the following NDT methods is SNT-TC-1A
currently not applicable
With flexibility and reason - correct answer ✔✔ASNT intended that the recommendations of
SNT-TC-1A be applied
, The employer. - correct answer ✔✔Of the following, which is most appropriate to determine
the needs to qualify and certify personnel whose only NDT function is to operate digital
thickness equipment.
Written testimony of qualification. - correct answer ✔✔Certification is
It has been specified by the customer. - correct answer ✔✔Use of SNT-TC-1A is mandatory
when:
Level I, Level II and Level III. - correct answer ✔✔The basic levels of qualification recommended
by SNT-TC-1A are:
Weather any NDT personnel should be qualified and certified depends solely upon the needs of
the employer and the requirements of the employer's customers or clientele. - correct answer
✔✔Should personnel that operate ultrasonic digital thickness measurement equipment to
qualified and certified
The Trainee may not conduct nondestructive test independently and may not report test results
- correct answer ✔✔According to the recommendations of SNT-TC-1A which of the following is
true concerning a Trainee's activities?
Must train and examine the Level I and II personnel in his or her organization. - correct answer
✔✔According to SNT-TC-1A, which of the following is not true for a Level III?
Specific calibrations, Specific nondestructive test, specific evaluations.All of the above and
record test result - correct answer ✔✔According to written instructions, an NDT Level I may be
qualified to perform:
Yes, the intent in SNT-TC-1A is that the Level I may perform the above functions provided that
they are in accordance with written instruction of a Level III or designee. - correct answer
SNT-TC-1A is not intended to be used as a strict specification. - correct answer ✔✔Which of the
following statements is true concerning the usage of SNT-TC-1A?
Written and stated in general terms - correct answer ✔✔The SNT-TC-1A Interpretation Panel
will respond to inquiries about SNT-TC-1A. The inquiry must be:
May engage an outside service but is, nevertheless, responsible for the certification of the
company's NDT personnel - correct answer ✔✔With regard to the training of NDT personnel,
the employer:
To establish their own written practice for the qualification and certification of their NDT
personnel - correct answer ✔✔SNT-TC-1A is intended as a guideline for employers:
The employer should review the detailed recommendations and modify them, as necessary, to
meet its particular needs. - correct answer ✔✔The following is a statement in SNT-TC-1A "It is
recognized that these guidelines may not be appropriate for certain employers; circumstances
and / or applications." What should be done if the guidelines are not appropriate?
The individual's employer. - correct answer ✔✔Who should be responsible to assess whether or
not an individual should be qualified and certified who does not perform NDT, but monitors and
evaluates NDT?
Holographic testing - correct answer ✔✔To which of the following NDT methods is SNT-TC-1A
currently not applicable
With flexibility and reason - correct answer ✔✔ASNT intended that the recommendations of
SNT-TC-1A be applied
, The employer. - correct answer ✔✔Of the following, which is most appropriate to determine
the needs to qualify and certify personnel whose only NDT function is to operate digital
thickness equipment.
Written testimony of qualification. - correct answer ✔✔Certification is
It has been specified by the customer. - correct answer ✔✔Use of SNT-TC-1A is mandatory
when:
Level I, Level II and Level III. - correct answer ✔✔The basic levels of qualification recommended
by SNT-TC-1A are:
Weather any NDT personnel should be qualified and certified depends solely upon the needs of
the employer and the requirements of the employer's customers or clientele. - correct answer
✔✔Should personnel that operate ultrasonic digital thickness measurement equipment to
qualified and certified
The Trainee may not conduct nondestructive test independently and may not report test results
- correct answer ✔✔According to the recommendations of SNT-TC-1A which of the following is
true concerning a Trainee's activities?
Must train and examine the Level I and II personnel in his or her organization. - correct answer
✔✔According to SNT-TC-1A, which of the following is not true for a Level III?
Specific calibrations, Specific nondestructive test, specific evaluations.All of the above and
record test result - correct answer ✔✔According to written instructions, an NDT Level I may be
qualified to perform:
Yes, the intent in SNT-TC-1A is that the Level I may perform the above functions provided that
they are in accordance with written instruction of a Level III or designee. - correct answer
