ADVANCED RIGGING ACTUAL TEST
PAPER 2026 COMPLETE QUESTIONS AND
SOLUTIONS GRADED A+
●● cranes are typically built to be.
Answer: longer than they are wide
●● in a multiple-crane lift, the crane with the greatest net capacity must
always be.
Answer: closest to the loads center of gravity
●● leverage is defined as.
Answer: the power applied to a lever to cause the load to move
●● the quadrant that is located between the rear outriggers or crawlers in
the rearward direction of travel is known as.
Answer: over-the-rear
●● what dynamic occurs when a load is hoisted from a point other than
directly over the load.
Answer: pendulum effect
, ●● the sudden release of a load that causes a rapid change in effective
load weight is called.
Answer: acceleration
●● backward stability of a crane is affected by.
Answer: high boom angles and inclines
●● a loads center of gravity in relation to the tipping axis is affected by
all of the following except.
Answer: raising or lowering the load
●● a cranes stability is affected by all of the following except.
Answer: centered lift
●● to find the parts of line, the operator.
Answer: divides the suspended weight by the WLL of the hoist rope
●● a document that outlines all weight, rigging, and configuration
requirements for a lift is a.
Answer: lift plan
PAPER 2026 COMPLETE QUESTIONS AND
SOLUTIONS GRADED A+
●● cranes are typically built to be.
Answer: longer than they are wide
●● in a multiple-crane lift, the crane with the greatest net capacity must
always be.
Answer: closest to the loads center of gravity
●● leverage is defined as.
Answer: the power applied to a lever to cause the load to move
●● the quadrant that is located between the rear outriggers or crawlers in
the rearward direction of travel is known as.
Answer: over-the-rear
●● what dynamic occurs when a load is hoisted from a point other than
directly over the load.
Answer: pendulum effect
, ●● the sudden release of a load that causes a rapid change in effective
load weight is called.
Answer: acceleration
●● backward stability of a crane is affected by.
Answer: high boom angles and inclines
●● a loads center of gravity in relation to the tipping axis is affected by
all of the following except.
Answer: raising or lowering the load
●● a cranes stability is affected by all of the following except.
Answer: centered lift
●● to find the parts of line, the operator.
Answer: divides the suspended weight by the WLL of the hoist rope
●● a document that outlines all weight, rigging, and configuration
requirements for a lift is a.
Answer: lift plan
