Nccer Core Introduction to Basic Construction Skills Sixth Edition Questions And Answers Verified 100% Correct

Nccer Core Introduction to Basic Construction Skills Sixth Edition Questions And Answers Verified 100% Correct management system - ANSWER -The organization of a company's management, including reporting procedures, supervisory responsibility, and administration. (SDS) - ANSWER -Safety Data Sheet Safety Data Sheet (SDS) - ANSWER -A document that must accompany any hazardous substance. The SDS identifies the substance and gives the exposure limits, the physical and chemical characteristics, the kind of hazard it presents, precautions for safe handling and use, and specific control measures. Respirators - ANSWER -Devices that provide clean, filtered air for breathing, no matter what is in the surrounding air. flammable - ANSWER -Capable of easily igniting and rapidly burning; used to describe a fuel with a flash point below 100°F (38°C). (PPE) - ANSWER -personal protective equipment Personal Protective Equipment (PPE) - ANSWER -Equipment or clothing designed to prevent or reduce injuries. Examples of an unsafe act - ANSWER -Failing to use required PPE Failing to warn co-workers of hazards Lifting improperly Loading or placing equipment or supplies improperly Making safety devices (such as saw guards) inoperable Operating equipment without authority Servicing equipment in motion Taking an improper working position Using defective equipment Using equipment improperly Examples of unsafe conditions - ANSWER -Congested workplace Defective tools, equipment, or supplies Excessive noise Fire and explosive hazards Hazardous atmospheric conditions (such as gases, dusts, fumes, and vapors) Inadequate supports or guards Inadequate warning systems Cluttered work area Poor lighting Poor Ventilation Radiation exposure Unguarded moving parts such as pulleys, drive chains, and belts Combustible - ANSWER -Capable of easily igniting and rapidly burning; used to describe a fuel with a flash point at or above 100*F (38*C). Hazard Communication Standard (HAZCOM) - ANSWER -The Occupational Safety and Health Administration standard that requires contractors to educate employees about hazardous chemicals on the job site and how to work with them safely. HAZCOM - ANSWER -Hazard Communication Standard Pneumatic - ANSWER -Powered by air pressure, such as a pneumatic tool. Hydraulic - ANSWER -Powered by fluid under pressure. Competent person - ANSWER -A person who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them. Good Housekeeping rules - ANSWER -Remove from work areas all scrap material and lumber with nails protruding Clean up spills to prevent falls Remove all combustible scrap materials regularly Make sure you have containers for the collection and separation of refuse containers for flammable or harmful refuse must have covers Dispose of wastes often Store all tools and equipment in the proper location and condition when you are finished with them Keep all aisles and walkways clear of materials and tools A company implementing a good management system will do the following - ANSWER -Put safety policies and procedures in writing Distribute written safety policies and procedures to each employee Review safety policies and procedures periodically Enforce all safety policies and procedures fairly and consistently Evaluate supplies, equipment, and services to see whether they are safe Provide regular, periodic safety training for employees As an employee, you have the following responsibilities under HAZCOM: - ANSWER -Know where SDSs are on your job site. Report any hazards you spot on the job site to your supervisor. Know the physical and health hazards of any hazardous materials on your job site, and know and practice the precautions needed to protect yourself from these hazards. Know what to do in an emergency. Know the location and content of your employer's written hazard communication program. If a situation or equipment is potentially hazardous is to ask these questions: - ANSWER -How can this situation or equipment cause harm? What type of energy sources are present that can cause an incident? What is the magnitude of the energy? what could go wrong to release the energy?