NFPA 1002: AIRPORT SURVIVAL & EMERGENCY (AS&E) | COMPLETE TEST
QUESTIONS AND CORRECT ANSWERS LATEST UPDATED 2026/2027
The fire pump's function is to provide water at the necessary pressure.
A. Force of Centrifugation
B. Loudness
C. Movement
D. Loss of Friction: B. Volume
The following methods can be used to supply water to a fire pump:
A. Static or hydrant
B. A portable pump or hydrant
C. Hydrant or truck tank
D. Everything mentioned above— ANSWER D. Everything mentioned above
When a truck is being inspected, why is it necessary to examine underneath it?
A. To guarantee that wheel chocks are installed
B. To check for leaks of fluid
C. To look for damage to the tires
D. To check the fuel tank ( ANSWER B). To check for leaks of fluid
When there is a chance that a structure will collapse, trucks should be
positioned at least:
A. 1.5 times the building's height
B. Two times the wall's height away from the structure
C. Half the wall's height away from the structure
D. Along the wall's potential fall path - ANSWER A. 1.5 times the building's
height
When drafting from a source, the ideal water volume can be reached:
, A. Blow the pump for six meters.
B. Three meters beneath the pump
C. Ten meters beneath the pump
D. Five meters below the pump; B. Three meters below the pump
Why would you want to stop short of the hydrant outlet?
A. Doesn't need a hose ramp
B. Doesn't need hose adapters
C. Prevents kinks by enabling the hose to curve
D. Lessens traffic near the hydrant ( ANSWER C). prevents kinks and permits
the hose to curve.
One benefit of utilizing water as an extinguishing agent is which of the
following?
A. Low capacity to absorb heat
B. Excellent accessibility
C. Minimal surface tension
D. High reflectivity and capacity - ANSWER B. High accessibility
The term used to describe the roughness of a hose's inner liner is:
A. Friction inside
B. Ratio of surface area
C. Friction coefficient
D. Roughness factor: C. Friction coefficient
What is the most effective way to avoid water hammer?
A. Take off the apparatus's pressure lever devices
B. Slowly open and close nozzles and valves
C. Use a hose with a large diameter.
D. Lower the water supply system's pressure - ANSWER B. Slowly open and
close nozzles and valves
Comply with the definition:
energy surge in the opposite direction brought on by abruptly stopping the flow
of water through a pipe or hose.
A. Persistent Pressure
B. The Water Hammer
QUESTIONS AND CORRECT ANSWERS LATEST UPDATED 2026/2027
The fire pump's function is to provide water at the necessary pressure.
A. Force of Centrifugation
B. Loudness
C. Movement
D. Loss of Friction: B. Volume
The following methods can be used to supply water to a fire pump:
A. Static or hydrant
B. A portable pump or hydrant
C. Hydrant or truck tank
D. Everything mentioned above— ANSWER D. Everything mentioned above
When a truck is being inspected, why is it necessary to examine underneath it?
A. To guarantee that wheel chocks are installed
B. To check for leaks of fluid
C. To look for damage to the tires
D. To check the fuel tank ( ANSWER B). To check for leaks of fluid
When there is a chance that a structure will collapse, trucks should be
positioned at least:
A. 1.5 times the building's height
B. Two times the wall's height away from the structure
C. Half the wall's height away from the structure
D. Along the wall's potential fall path - ANSWER A. 1.5 times the building's
height
When drafting from a source, the ideal water volume can be reached:
, A. Blow the pump for six meters.
B. Three meters beneath the pump
C. Ten meters beneath the pump
D. Five meters below the pump; B. Three meters below the pump
Why would you want to stop short of the hydrant outlet?
A. Doesn't need a hose ramp
B. Doesn't need hose adapters
C. Prevents kinks by enabling the hose to curve
D. Lessens traffic near the hydrant ( ANSWER C). prevents kinks and permits
the hose to curve.
One benefit of utilizing water as an extinguishing agent is which of the
following?
A. Low capacity to absorb heat
B. Excellent accessibility
C. Minimal surface tension
D. High reflectivity and capacity - ANSWER B. High accessibility
The term used to describe the roughness of a hose's inner liner is:
A. Friction inside
B. Ratio of surface area
C. Friction coefficient
D. Roughness factor: C. Friction coefficient
What is the most effective way to avoid water hammer?
A. Take off the apparatus's pressure lever devices
B. Slowly open and close nozzles and valves
C. Use a hose with a large diameter.
D. Lower the water supply system's pressure - ANSWER B. Slowly open and
close nozzles and valves
Comply with the definition:
energy surge in the opposite direction brought on by abruptly stopping the flow
of water through a pipe or hose.
A. Persistent Pressure
B. The Water Hammer
