Maryland Utility Safety Compliance Exam
With Actual Questions & Verified
Answers,Explained Rationales/Expert
Verified For Guaranteed Pass 2026/Latest
Update/Instant Download Pdf
1. A primary purpose of utility safety compliance programs is to:
A) Increase billing efficiency
B) Reduce operational costs only
C) Prevent workplace injuries and ensure regulatory compliance
D) Replace supervisory roles
Answer: C) Prevent workplace injuries and ensure regulatory
compliance
Rationale: Utility safety compliance programs are designed to
protect workers, the public, and infrastructure while ensuring
adherence to OSHA and state regulations.
2. Which agency primarily sets federal workplace safety standards
for utilities?
A) EPA
B) OSHA
C) FCC
D) FEMA
Answer: B) OSHA
Rationale: OSHA (Occupational Safety and Health
Administration) establishes and enforces workplace safety
standards in utility environments.
,3. Lockout/Tagout (LOTO) procedures are used to:
A) Speed up electrical work
B) Prevent accidental energizing of equipment
C) Increase system voltage
D) Reduce staffing needs
Answer: B) Prevent accidental energizing of equipment
Rationale: LOTO ensures equipment is de-energized and cannot
be restarted during maintenance.
4. The most important first step before entering a trench is:
A) Installing pumps
B) Checking weather conditions
C) Performing a hazard assessment
D) Installing utility poles
Answer: C) Performing a hazard assessment
Rationale: A hazard assessment identifies risks such as collapse,
utilities, and soil instability.
5. What is the minimum recommended PPE for general utility
fieldwork?
A) Hard hat, safety boots, and high-visibility vest
B) Gloves only
C) Sunglasses only
D) Earplugs only
Answer: A) Hard hat, safety boots, and high-visibility vest
Rationale: Standard PPE protects against head injury, foot injury,
and visibility hazards.
6. A confined space is defined as:
A) Any small office
B) A space designed for continuous occupancy
C) A space with limited entry/exit and not designed for continuous
, occupancy
D) Any underground tunnel
Answer: C) A space with limited entry/exit and not designed for
continuous occupancy
Rationale: Confined spaces pose risks like toxic atmosphere and
restricted movement.
7. Gas detection is required before entering:
A) Office buildings
B) Confined spaces
C) Parking lots
D) Warehouses only
Answer: B) Confined spaces
Rationale: Confined spaces may contain hazardous gases
requiring atmospheric testing.
8. The purpose of a utility locate (811 call) is to:
A) Increase excavation speed
B) Identify underground utilities before digging
C) Repair damaged lines
D) Install new pipes
Answer: B) Identify underground utilities before digging
Rationale: Utility locates prevent accidental strikes and service
disruptions.
9. A backhoe striking a buried gas line is an example of:
A) Administrative control
B) Mechanical failure
C) Utility strike incident
D) Routine maintenance
Answer: C) Utility strike incident
With Actual Questions & Verified
Answers,Explained Rationales/Expert
Verified For Guaranteed Pass 2026/Latest
Update/Instant Download Pdf
1. A primary purpose of utility safety compliance programs is to:
A) Increase billing efficiency
B) Reduce operational costs only
C) Prevent workplace injuries and ensure regulatory compliance
D) Replace supervisory roles
Answer: C) Prevent workplace injuries and ensure regulatory
compliance
Rationale: Utility safety compliance programs are designed to
protect workers, the public, and infrastructure while ensuring
adherence to OSHA and state regulations.
2. Which agency primarily sets federal workplace safety standards
for utilities?
A) EPA
B) OSHA
C) FCC
D) FEMA
Answer: B) OSHA
Rationale: OSHA (Occupational Safety and Health
Administration) establishes and enforces workplace safety
standards in utility environments.
,3. Lockout/Tagout (LOTO) procedures are used to:
A) Speed up electrical work
B) Prevent accidental energizing of equipment
C) Increase system voltage
D) Reduce staffing needs
Answer: B) Prevent accidental energizing of equipment
Rationale: LOTO ensures equipment is de-energized and cannot
be restarted during maintenance.
4. The most important first step before entering a trench is:
A) Installing pumps
B) Checking weather conditions
C) Performing a hazard assessment
D) Installing utility poles
Answer: C) Performing a hazard assessment
Rationale: A hazard assessment identifies risks such as collapse,
utilities, and soil instability.
5. What is the minimum recommended PPE for general utility
fieldwork?
A) Hard hat, safety boots, and high-visibility vest
B) Gloves only
C) Sunglasses only
D) Earplugs only
Answer: A) Hard hat, safety boots, and high-visibility vest
Rationale: Standard PPE protects against head injury, foot injury,
and visibility hazards.
6. A confined space is defined as:
A) Any small office
B) A space designed for continuous occupancy
C) A space with limited entry/exit and not designed for continuous
, occupancy
D) Any underground tunnel
Answer: C) A space with limited entry/exit and not designed for
continuous occupancy
Rationale: Confined spaces pose risks like toxic atmosphere and
restricted movement.
7. Gas detection is required before entering:
A) Office buildings
B) Confined spaces
C) Parking lots
D) Warehouses only
Answer: B) Confined spaces
Rationale: Confined spaces may contain hazardous gases
requiring atmospheric testing.
8. The purpose of a utility locate (811 call) is to:
A) Increase excavation speed
B) Identify underground utilities before digging
C) Repair damaged lines
D) Install new pipes
Answer: B) Identify underground utilities before digging
Rationale: Utility locates prevent accidental strikes and service
disruptions.
9. A backhoe striking a buried gas line is an example of:
A) Administrative control
B) Mechanical failure
C) Utility strike incident
D) Routine maintenance
Answer: C) Utility strike incident
