1|Page
Introduction to Explosives Safety for Safety
Professionals Exam 2026/2027 ||Verified Exam!!!||
Most Recent Exam Actual Complete Real Exam
Questions And Correct Answers (Verified Answers)
Already Graded A+ ||Newest Exam!!
The Installation Commander assigns one person as the
POC for all ESMP activities. Which role does that person
fill? - Answer-Occupational Health and Safety Manager
What is the primary hazard for HC 1.1? - Answer-Mass
detonation
Which placard must be attached to a load with a primary
hazard of mass fire? - Answer-Explosives 1.3 1
Which placard indicates fragmentation as the primary
hazard? - Answer-Explosives 1.2 1
Which placard must be displayed on a vehicle transporting
a load of ammunition with a moderate risk of fire? -
Answer-1.4 Explosives 1
,2|Page
What are four uses for DU - Answer-Aircraft counterweight
Kinetic energy projectile
Protective armor plating
Radiation shielding material
Which option shows the three hazards for DU in order
from most hazardous to least hazardous? - Answer-
Explosive, chemical, radiological
If the quantity of explosives in a magazine exceeds the
allowed safe storage limit (QD), what could cause the
adjacent structures to explode as well? - Answer-
Propogation
Which ESQD term applies to Lil' T's? - Answer-PES
Which three items are addressed in an ESSP? - Answer-
Construction considerations
Master plan reconciliation
Quantity distance analysis
,3|Page
Under which two circumstances would an ESSP be
updated? - Answer-Increasing the explosive limit of an
existing potential explosion site (PES)
Planning a new explosives storage building for
construction
Your role is to ensure the safety and serviceability of the
stockpile and monitor A&E uploads, transportation, and
storage activities. Who are you? - Answer-QASAS
You have been appointed as your installation's
Occupational Health and Safety Manager. Who is
responsible for developing, implementing, and managing
the ESP as part of the overall safety and occupational
health program for the installation? - Answer-Installation
Commander
If you are responsible for assisting commanders and staff
with resolving explosives safety concerns, which role do
you have? - Answer-Safety Specialist
If you are assigned to support tactical units regarding
execution of ESMP. Who are you? - Answer-Ammunition
Warrant Officer
, 4|Page
Which two load transportation violations are shown in the
photo? - Answer-It is in the passenger compartment.
It is not secure.
Which two load transportation violations are shown in the
photo? - Answer-It has no outer packing.
It is not unitized.
Which two load transportation violations are shown in the
photo? - Answer-It is completely exposed.
It is not secured.
Indicate whether each characteristic identifies A&E as
standard or non-standard. - Answer-Assigned HC -
Standard
Not Assigned HC - Non-standard
Evaluated for safety, health, quality standards - Standard
Quality and reliability have not been assessed - Non-
standard
Packaged, protected from long term storage or
environment - Standard
Introduction to Explosives Safety for Safety
Professionals Exam 2026/2027 ||Verified Exam!!!||
Most Recent Exam Actual Complete Real Exam
Questions And Correct Answers (Verified Answers)
Already Graded A+ ||Newest Exam!!
The Installation Commander assigns one person as the
POC for all ESMP activities. Which role does that person
fill? - Answer-Occupational Health and Safety Manager
What is the primary hazard for HC 1.1? - Answer-Mass
detonation
Which placard must be attached to a load with a primary
hazard of mass fire? - Answer-Explosives 1.3 1
Which placard indicates fragmentation as the primary
hazard? - Answer-Explosives 1.2 1
Which placard must be displayed on a vehicle transporting
a load of ammunition with a moderate risk of fire? -
Answer-1.4 Explosives 1
,2|Page
What are four uses for DU - Answer-Aircraft counterweight
Kinetic energy projectile
Protective armor plating
Radiation shielding material
Which option shows the three hazards for DU in order
from most hazardous to least hazardous? - Answer-
Explosive, chemical, radiological
If the quantity of explosives in a magazine exceeds the
allowed safe storage limit (QD), what could cause the
adjacent structures to explode as well? - Answer-
Propogation
Which ESQD term applies to Lil' T's? - Answer-PES
Which three items are addressed in an ESSP? - Answer-
Construction considerations
Master plan reconciliation
Quantity distance analysis
,3|Page
Under which two circumstances would an ESSP be
updated? - Answer-Increasing the explosive limit of an
existing potential explosion site (PES)
Planning a new explosives storage building for
construction
Your role is to ensure the safety and serviceability of the
stockpile and monitor A&E uploads, transportation, and
storage activities. Who are you? - Answer-QASAS
You have been appointed as your installation's
Occupational Health and Safety Manager. Who is
responsible for developing, implementing, and managing
the ESP as part of the overall safety and occupational
health program for the installation? - Answer-Installation
Commander
If you are responsible for assisting commanders and staff
with resolving explosives safety concerns, which role do
you have? - Answer-Safety Specialist
If you are assigned to support tactical units regarding
execution of ESMP. Who are you? - Answer-Ammunition
Warrant Officer
, 4|Page
Which two load transportation violations are shown in the
photo? - Answer-It is in the passenger compartment.
It is not secure.
Which two load transportation violations are shown in the
photo? - Answer-It has no outer packing.
It is not unitized.
Which two load transportation violations are shown in the
photo? - Answer-It is completely exposed.
It is not secured.
Indicate whether each characteristic identifies A&E as
standard or non-standard. - Answer-Assigned HC -
Standard
Not Assigned HC - Non-standard
Evaluated for safety, health, quality standards - Standard
Quality and reliability have not been assessed - Non-
standard
Packaged, protected from long term storage or
environment - Standard
