1|Page
PCI Quality Control Technician Level 1 Exam
2026/2027 ||Verified Exam!!!|| Most Recent Exam
Actual Complete Real Exam Questions And Correct
Answers (Verified Answers) Already Graded A+ |
Guaranteed Success!! Newest Exam!!!
ASTM - Answer-American Society for Testing and
Materials
ASTM C31/C31M - Answer-Making and Curing Concrete
Test Specimens in the Field
Granular materials used with cementing medium to form
hydraulic-cement, concrete, or mortar are called? -
Answer-Aggregates
ASTM C138 - Answer-This test method covers
determination of the density of freshly mixed concrete and
gives formulas for calculating the unit weight, yield or
relative yield, cement content, and air content of the
concrete.
,2|Page
Water that rises to the surface of a freshly placed concrete
is called? - Answer-Bleed Water
A condition where two parallel edges of the panel are in
the same plane and the portions of the panel between the
edges is out of plane is called? - Answer-Bowing
The finish of concrete cast without forms that usually
requires manual or machine finish is called - Answer-
Unformed Surface Finish
The finish of concrete cast directly against a form is called
- Answer-As-Cast Formed Finish
ASTM C143 - Answer-Standard Test Method for Slump of
Hydraulic-Cement Concrete
A substance placed on a material to prevent it from
bonding to the concrete or between a face material and
the concrete backup is called? - Answer-Bond Breaker
ASTM C172 - Answer-Standard Practice for Sampling
Freshly Mixed Concrete
,3|Page
Material other than water, aggregates, cement, or fiber
used in concrete, mortar, or grout added to batch
immediately before or during mixing to modify concrete
properties is called _______________ - Answer-Admixture
ASTM C173 - Answer-Standard Test Method for Air
Content of Freshly Mixed Concrete by the Volumetric
Method
ASTM C231 - Answer-Standard Test Method for Air
Content of Freshly Mixed Concrete by the Pressure
Method
ASTM C1064 - Answer-Standard Test Method for
Temperature of Freshly Mixed Hydraulic-Cement Concrete
PCI MNL-130 - Answer-GFRC
QSM - Answer-Quality System Manual
AWS D1.1 - Answer-Structural Welding Code Steel
, 4|Page
ASTM A706 - Answer-Reinforcing Steel does include
weldability as a required property
For aggregates predominantly retained on the #4 sieve,
the portion retained are called? - Answer-Coarse
Aggregates
Cements must conform to - Answer-ASTM C150
Lightweight Concrete must conform to - Answer-ASTM
C330
Fine and Coarse Aggregates must conform to - Answer-
ASTM C33
Fineness modulus of fine aggregates for structural
products must always be within _________________ to
conform to ASTM C33. Architectural products are exempt
when trying to get a certain finish. - Answer-2.3 to 3.1 with
a variation of +/- 0.2 between gradations
PCI Quality Control Technician Level 1 Exam
2026/2027 ||Verified Exam!!!|| Most Recent Exam
Actual Complete Real Exam Questions And Correct
Answers (Verified Answers) Already Graded A+ |
Guaranteed Success!! Newest Exam!!!
ASTM - Answer-American Society for Testing and
Materials
ASTM C31/C31M - Answer-Making and Curing Concrete
Test Specimens in the Field
Granular materials used with cementing medium to form
hydraulic-cement, concrete, or mortar are called? -
Answer-Aggregates
ASTM C138 - Answer-This test method covers
determination of the density of freshly mixed concrete and
gives formulas for calculating the unit weight, yield or
relative yield, cement content, and air content of the
concrete.
,2|Page
Water that rises to the surface of a freshly placed concrete
is called? - Answer-Bleed Water
A condition where two parallel edges of the panel are in
the same plane and the portions of the panel between the
edges is out of plane is called? - Answer-Bowing
The finish of concrete cast without forms that usually
requires manual or machine finish is called - Answer-
Unformed Surface Finish
The finish of concrete cast directly against a form is called
- Answer-As-Cast Formed Finish
ASTM C143 - Answer-Standard Test Method for Slump of
Hydraulic-Cement Concrete
A substance placed on a material to prevent it from
bonding to the concrete or between a face material and
the concrete backup is called? - Answer-Bond Breaker
ASTM C172 - Answer-Standard Practice for Sampling
Freshly Mixed Concrete
,3|Page
Material other than water, aggregates, cement, or fiber
used in concrete, mortar, or grout added to batch
immediately before or during mixing to modify concrete
properties is called _______________ - Answer-Admixture
ASTM C173 - Answer-Standard Test Method for Air
Content of Freshly Mixed Concrete by the Volumetric
Method
ASTM C231 - Answer-Standard Test Method for Air
Content of Freshly Mixed Concrete by the Pressure
Method
ASTM C1064 - Answer-Standard Test Method for
Temperature of Freshly Mixed Hydraulic-Cement Concrete
PCI MNL-130 - Answer-GFRC
QSM - Answer-Quality System Manual
AWS D1.1 - Answer-Structural Welding Code Steel
, 4|Page
ASTM A706 - Answer-Reinforcing Steel does include
weldability as a required property
For aggregates predominantly retained on the #4 sieve,
the portion retained are called? - Answer-Coarse
Aggregates
Cements must conform to - Answer-ASTM C150
Lightweight Concrete must conform to - Answer-ASTM
C330
Fine and Coarse Aggregates must conform to - Answer-
ASTM C33
Fineness modulus of fine aggregates for structural
products must always be within _________________ to
conform to ASTM C33. Architectural products are exempt
when trying to get a certain finish. - Answer-2.3 to 3.1 with
a variation of +/- 0.2 between gradations
