APPRENTICE LINEMAN ACTUAL EXAM
QUESTIONS AND COMPLETE STUDY GUIDE
2026
▶ Fall arrest equipment must be used by workers at elevated locations that
are more than ___________ above the ground.. Answer: 4'
▶ Guardrail systems must be constructed with a rail height of __________
(plus or minus three inches) to
meet the requirement of fall protection.. Answer: 42"
▶ A Qualified Electrical Worker should always ________ to make sure that
snap hooks are always fully engaged.. Answer: visually inspect
▶ To prevent employees from falling to lower levels, a ________ system
should be erected.. Answer: guardrail
▶ A _________
should never be used as a positioning device.. Answer: deceleration
lanyard
▶ Snap hooks on safety lanyards must be _______ type hooks.. Answer:
locking
▶ Shock absorbing lanyards and harnesses must be designed to
__________
in the event that a worker should fall.. Answer: limit the distance of the fall
▶ A system that utilizes a body belt or body harness rigged in a manner
that permits the employee to be supported on an elevated vertical surface
and work with both hands free is the _________ system.. Answer:
positioning device
QUESTIONS AND COMPLETE STUDY GUIDE
2026
▶ Fall arrest equipment must be used by workers at elevated locations that
are more than ___________ above the ground.. Answer: 4'
▶ Guardrail systems must be constructed with a rail height of __________
(plus or minus three inches) to
meet the requirement of fall protection.. Answer: 42"
▶ A Qualified Electrical Worker should always ________ to make sure that
snap hooks are always fully engaged.. Answer: visually inspect
▶ To prevent employees from falling to lower levels, a ________ system
should be erected.. Answer: guardrail
▶ A _________
should never be used as a positioning device.. Answer: deceleration
lanyard
▶ Snap hooks on safety lanyards must be _______ type hooks.. Answer:
locking
▶ Shock absorbing lanyards and harnesses must be designed to
__________
in the event that a worker should fall.. Answer: limit the distance of the fall
▶ A system that utilizes a body belt or body harness rigged in a manner
that permits the employee to be supported on an elevated vertical surface
and work with both hands free is the _________ system.. Answer:
positioning device
