NSE 7 LAN Edge 7.0 Sample Questions With
Complete Solutions
An AP is broadcasting a mix of tunnel mode and bridge mode SSIDs (VAPS).
Which mode is the AP using? - ANSWER A local or type 0 WTP mode AP
What are the two supported management modes for FortiSwitch manager on
FortiManager? (Choose two.) - ANSWER Central management mode
Per-device management mode
You have enabled wireless client quarantine on a FortiGate wireless network.
Which additional configuration task do you nee
remediate itself, if the client is quarantined? - ANSWER Create a policy that
allows access to remediation resources..
You are managing a FortiGate wireless network using FortiManager, and you
create an SSID profile that defines a tunneled wireless network. FortiManager is
centrally managing FortiAPs in the VDOM.
You have created an AP profile and assigned it to the APs required to broadcast
the SSID, but the network is not visible.
Examine the following FortiManager AP profile:
Which configuration change must you make to broadcast the network
successfully on both radio interfaces? - ANSWER Change the SSIDs setting to
Manual and assign the required SSID profile..
Examine the following VAP configuration:
config wireless-controller vap
edit "Corp"
set vdom "root"
set ssid "Corp"
set security wpa2-only-enterprise
set auth radius
set radius-server
"FAC-Lab"
set intra-vap-privacy enable
set schedule
"always"
set vlan-pooling round-robin
config vlan-pool
edit 101
Complete Solutions
An AP is broadcasting a mix of tunnel mode and bridge mode SSIDs (VAPS).
Which mode is the AP using? - ANSWER A local or type 0 WTP mode AP
What are the two supported management modes for FortiSwitch manager on
FortiManager? (Choose two.) - ANSWER Central management mode
Per-device management mode
You have enabled wireless client quarantine on a FortiGate wireless network.
Which additional configuration task do you nee
remediate itself, if the client is quarantined? - ANSWER Create a policy that
allows access to remediation resources..
You are managing a FortiGate wireless network using FortiManager, and you
create an SSID profile that defines a tunneled wireless network. FortiManager is
centrally managing FortiAPs in the VDOM.
You have created an AP profile and assigned it to the APs required to broadcast
the SSID, but the network is not visible.
Examine the following FortiManager AP profile:
Which configuration change must you make to broadcast the network
successfully on both radio interfaces? - ANSWER Change the SSIDs setting to
Manual and assign the required SSID profile..
Examine the following VAP configuration:
config wireless-controller vap
edit "Corp"
set vdom "root"
set ssid "Corp"
set security wpa2-only-enterprise
set auth radius
set radius-server
"FAC-Lab"
set intra-vap-privacy enable
set schedule
"always"
set vlan-pooling round-robin
config vlan-pool
edit 101