2026 ACI EXAM QUESTIONS WITH
CORRECT ANSWERS
The end of the temperature measuring device must be submerged a minimum of ______? -
CORRECT ANSWER -3"
What is the required capability range on the temperature measuring device? - CORRECT ANSWER -
30 degrees F - 120 degrees F
The temperature measuring device shall be verified __________, or whenever there is a question of __
_______. - CORRECT ANSWER -annually, accuracy
The temperature of concrete may be measured in a wheelbarrow. True or False? - CORRECT ANSWER -
TRUE
The temperature of concrete may be measured in a wall form. True or False? - CORRECT ANSWER -
TRUE
A composite sample of concrete is required even if the only purpose for obtaining the sample is to dete
rmine temperature. True or False? - CORRECT ANSWER -FALSE
What must be done to the sample container prior to sampling concrete? - CORRECT ANSWER -
Dampen the surface with water.
What must be done to the concrete surrounding the temperature measuring device aſter the device is s
ubmerged in the fresh concrete? - CORRECT ANSWER -
Gently push the surrounding concrete back around the temperature measuring device near the surface.
How long must the temperature measuring device remain in the freshly mixed concrete? -
CORRECT ANSWER -2 - 5 minutes.
Aſter the temperature of concrete is read, what is then required. - CORRECT ANSWER -
Report the temperature of the concrete to the nearest 1.0 degree F.
,The temperature of the concrete is reported to the nearest ________C. _________F. -
CORRECT ANSWER -0.5 degree C, 1.0 degree F
According to ASTM C1064 what is one reason to take the temperature of concrete? -
CORRECT ANSWER -Verify conformance to a specified requirement.
A maximum temperature of freshly mixed concrete is specified in Test Method C1064. True or False? -
CORRECT ANSWER -FALSE
The sample of concrete used for temperature determination must be rodded 25 times. True or False? -
CORRECT ANSWER -FALSE
What is the reason for pressing concrete around the temperature measuring device? -
CORRECT ANSWER -
So that the ambient air temperature does not influence the measured temperature.
You should remove the temperature measuring device before reporting the reading. TRUE or FALSE? -
CORRECT ANSWER -FALSE
What is the ASTM for measuring temperature on freshly sampled concrete? - CORRECT ANSWER -
C1064
What is the ASTM for Sampling FreshlycMixedcConcretec-cCORRECTcANSWERc-C172
Whatciscthecmaximumcelapsedctimecforcobtainingcaccompositec(twocorcmorecpart)csamplecofcconcrete?c
-
CORRECTcANSWERc-15cMinutes
Whatcshouldcbecdonectoc thecconcretecsamplecaſterctransportingcitctoc thectestingcsite?c -
CORRECTcANSWERc-Remixcitcwithcacshovelctocensurecuniformity.
Withinchowcmanycminutescshouldctestscbec startedcforcslump,cairccontent,candctemperaturecaſtercobtaini
ngcacconcretecsample?c-cCORRECTcANSWERc-5cminutes
,c
Testc cylinderscforcstrengthcshouldcbecmoldedcwithinc___cminutescofctakingcacconcretecsample.c-
CORRECTcANSWERc-15
Thecconcretecsamplecmustcbecprotectedcfromc_____,c_____,csourcescofcrapidc_______________,candcfr
omc______________________.c-cCORRECTcANSWERc-Sun,cWind,cEvaporation,cContamination.
Whatciscthecminimumcconcretecsamplecsizectoc bectakenc forctesting?c-cCORRECTcANSWERc-
28cLitersc/c1cſt3c(OnecCubiccFt)
Whencsamplingcfromcacstationarycmixer,chowcmanycportionscshouldcbectaken?c -
cCORRECTc ANSWERc -
Twocorcmore
Whencsamplingcfromcacstationarycmixer,c fromcwhichcportioncofcthecbatchcshouldcthecsamplescbectaken
?- CORRECTcANSWERc-Thecmiddlecportion.
Whencsamplingcfromcacstationarycmixer,cwhichctwoccollectioncmethodscarec acceptablecforcobtainingcac
s
ample?c-cCORRECTcANSWERc-1)cDivertingcthecentirecflow
2)cPassingcacreceptaclecentirelycthroughcthecdischargecstream
WhencsamplingcfromcacPavingcMixer,c howcmanycsamplescarecrequired?c-cCORRECTcANSWERc-
5csamplescminimumc(combinedcintoc oneccompositecsample)
WhencsamplingcfromcacPavingcMixer,c howcshouldcthecsample/scbectaken?c -
cCORRECTc ANSWERc-
Oncecdischargecisccompletecintoc acpile.
WhatcshouldcbecavoidedcwhenctakingcsamplescfromcacPavingcMixer?c-cCORRECTcANSWERc-
ContaminationcwithcthecSub-Gradec(ground)
WhencsamplingcfromcacRevolvingcDrumcMixercorcAgitatorcacminimumcofchowcmanycportionscshouldcbec
t
aken?c-cCORRECTcANSWERc-Twocorcmorec(combinedcintoconeccompositecsample)
CORRECT ANSWERS
The end of the temperature measuring device must be submerged a minimum of ______? -
CORRECT ANSWER -3"
What is the required capability range on the temperature measuring device? - CORRECT ANSWER -
30 degrees F - 120 degrees F
The temperature measuring device shall be verified __________, or whenever there is a question of __
_______. - CORRECT ANSWER -annually, accuracy
The temperature of concrete may be measured in a wheelbarrow. True or False? - CORRECT ANSWER -
TRUE
The temperature of concrete may be measured in a wall form. True or False? - CORRECT ANSWER -
TRUE
A composite sample of concrete is required even if the only purpose for obtaining the sample is to dete
rmine temperature. True or False? - CORRECT ANSWER -FALSE
What must be done to the sample container prior to sampling concrete? - CORRECT ANSWER -
Dampen the surface with water.
What must be done to the concrete surrounding the temperature measuring device aſter the device is s
ubmerged in the fresh concrete? - CORRECT ANSWER -
Gently push the surrounding concrete back around the temperature measuring device near the surface.
How long must the temperature measuring device remain in the freshly mixed concrete? -
CORRECT ANSWER -2 - 5 minutes.
Aſter the temperature of concrete is read, what is then required. - CORRECT ANSWER -
Report the temperature of the concrete to the nearest 1.0 degree F.
,The temperature of the concrete is reported to the nearest ________C. _________F. -
CORRECT ANSWER -0.5 degree C, 1.0 degree F
According to ASTM C1064 what is one reason to take the temperature of concrete? -
CORRECT ANSWER -Verify conformance to a specified requirement.
A maximum temperature of freshly mixed concrete is specified in Test Method C1064. True or False? -
CORRECT ANSWER -FALSE
The sample of concrete used for temperature determination must be rodded 25 times. True or False? -
CORRECT ANSWER -FALSE
What is the reason for pressing concrete around the temperature measuring device? -
CORRECT ANSWER -
So that the ambient air temperature does not influence the measured temperature.
You should remove the temperature measuring device before reporting the reading. TRUE or FALSE? -
CORRECT ANSWER -FALSE
What is the ASTM for measuring temperature on freshly sampled concrete? - CORRECT ANSWER -
C1064
What is the ASTM for Sampling FreshlycMixedcConcretec-cCORRECTcANSWERc-C172
Whatciscthecmaximumcelapsedctimecforcobtainingcaccompositec(twocorcmorecpart)csamplecofcconcrete?c
-
CORRECTcANSWERc-15cMinutes
Whatcshouldcbecdonectoc thecconcretecsamplecaſterctransportingcitctoc thectestingcsite?c -
CORRECTcANSWERc-Remixcitcwithcacshovelctocensurecuniformity.
Withinchowcmanycminutescshouldctestscbec startedcforcslump,cairccontent,candctemperaturecaſtercobtaini
ngcacconcretecsample?c-cCORRECTcANSWERc-5cminutes
,c
Testc cylinderscforcstrengthcshouldcbecmoldedcwithinc___cminutescofctakingcacconcretecsample.c-
CORRECTcANSWERc-15
Thecconcretecsamplecmustcbecprotectedcfromc_____,c_____,csourcescofcrapidc_______________,candcfr
omc______________________.c-cCORRECTcANSWERc-Sun,cWind,cEvaporation,cContamination.
Whatciscthecminimumcconcretecsamplecsizectoc bectakenc forctesting?c-cCORRECTcANSWERc-
28cLitersc/c1cſt3c(OnecCubiccFt)
Whencsamplingcfromcacstationarycmixer,chowcmanycportionscshouldcbectaken?c -
cCORRECTc ANSWERc -
Twocorcmore
Whencsamplingcfromcacstationarycmixer,c fromcwhichcportioncofcthecbatchcshouldcthecsamplescbectaken
?- CORRECTcANSWERc-Thecmiddlecportion.
Whencsamplingcfromcacstationarycmixer,cwhichctwoccollectioncmethodscarec acceptablecforcobtainingcac
s
ample?c-cCORRECTcANSWERc-1)cDivertingcthecentirecflow
2)cPassingcacreceptaclecentirelycthroughcthecdischargecstream
WhencsamplingcfromcacPavingcMixer,c howcmanycsamplescarecrequired?c-cCORRECTcANSWERc-
5csamplescminimumc(combinedcintoc oneccompositecsample)
WhencsamplingcfromcacPavingcMixer,c howcshouldcthecsample/scbectaken?c -
cCORRECTc ANSWERc-
Oncecdischargecisccompletecintoc acpile.
WhatcshouldcbecavoidedcwhenctakingcsamplescfromcacPavingcMixer?c-cCORRECTcANSWERc-
ContaminationcwithcthecSub-Gradec(ground)
WhencsamplingcfromcacRevolvingcDrumcMixercorcAgitatorcacminimumcofchowcmanycportionscshouldcbec
t
aken?c-cCORRECTcANSWERc-Twocorcmorec(combinedcintoconeccompositecsample)