1|Page
(JNCIA-SEC): Voucher Assessment Test COMPLETE
(2026/2027) EXAM ||VERIFIED EXAM!!!|| MOST
RECENT EXAM ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) ALREADY GRADED A+ | GUARANTEED
SUCCESS!! NEWEST EXAM!!!
Which of these actions is applied when the pre-id-default-
policy options are applied to a session? - Answer-Session
timeout value, along with the required mode of session
logging is applied
When traffic has met match criteria, what options are
available to be performed on the traffic? - Answer-permit,
reject, deny
When does a Junos security device implement NAT? -
Answer-both first path and fast path processing
On Junos devices running Junos Release 15.1X49-D90
and earlier, which of these must be enabled to use the
Monitor/Alarms/Policy workspace in J-Web? - Answer-
Enable event mode security logging
,2|Page
Which three Web filtering deployment actions are
supported by Junos? - Answer-Use Juniper Enhanced
Web Filtering, Use Websense Redirect, Use local lists.
What are two logical properties of an interface? - Answer-
IP address, VLAN ID
Which type of security is provided by firewall filters? -
Answer-Stateless
Which of these are used to look up the security
association (SA) for inbound traffic? - Answer-Security
protocol (AH or ESP), Security parameter index (SPI)
value, Destination IP address
Which operating systems are supported for Juniper
Secure Connect? - Answer-MacOS, Windows 10
You are designing a new security policy on an SRX Series
device. You must block an application and log all
occurrence of the application access attempts. In this
scenario, which two actions must be enabled in the
,3|Page
security policy? - Answer-Enable a deny action, Log the
session initiations
What are three primary match criteria used in a Junos
security policy? - Answer-destination address, source
address, application
When configuring antispam, where do you apply any local
lists that are configured? - Answer-custom objects
Which Sky ATP security feed is provided to vSRX devices
by default? - Answer-Command and Control feed
If you need to protect against malicious files that might be
download through Web-based e-mail, which Sky ATP
protection mechanism should you use? - Answer-HTTP file
inspection
The vSRX is available for which two of the following
hypervisors? - Answer-KVM, Hyper-V
Which of these Sky ATP features require a premium or
basic license? - Answer-Threat Intel feeds
, 4|Page
Which order do Junos security devices examine policies
for transit traffic? - Answer-zone policies, global policies,
default policy
What match criteria does an SRX Series device's network
processing unit (NPU) use to determine if a flow already
exists for a packet? - Answer-source port, protocol, unique
session token number for a given zone and virtual router
Which of these can be used to protect against
ransomware attacks? - Answer-Sky ATP
You are creating Ipsec connections. In this scenario, which
two statements are correct about proxy IDs? - Answer-
Proxy IDs are optional for Phase 2 session establishment.,
Proxy IDs are used to configure traffic selectors.
Users in your network are downloading files with file
extensions that you consider to be unsafe for your
network. You must prevent files with specific file
extensions from entering your network. - Answer-Content
filtering
Which of these is not a function provided by UTM? -
Answer-Intrusion prevention
(JNCIA-SEC): Voucher Assessment Test COMPLETE
(2026/2027) EXAM ||VERIFIED EXAM!!!|| MOST
RECENT EXAM ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) ALREADY GRADED A+ | GUARANTEED
SUCCESS!! NEWEST EXAM!!!
Which of these actions is applied when the pre-id-default-
policy options are applied to a session? - Answer-Session
timeout value, along with the required mode of session
logging is applied
When traffic has met match criteria, what options are
available to be performed on the traffic? - Answer-permit,
reject, deny
When does a Junos security device implement NAT? -
Answer-both first path and fast path processing
On Junos devices running Junos Release 15.1X49-D90
and earlier, which of these must be enabled to use the
Monitor/Alarms/Policy workspace in J-Web? - Answer-
Enable event mode security logging
,2|Page
Which three Web filtering deployment actions are
supported by Junos? - Answer-Use Juniper Enhanced
Web Filtering, Use Websense Redirect, Use local lists.
What are two logical properties of an interface? - Answer-
IP address, VLAN ID
Which type of security is provided by firewall filters? -
Answer-Stateless
Which of these are used to look up the security
association (SA) for inbound traffic? - Answer-Security
protocol (AH or ESP), Security parameter index (SPI)
value, Destination IP address
Which operating systems are supported for Juniper
Secure Connect? - Answer-MacOS, Windows 10
You are designing a new security policy on an SRX Series
device. You must block an application and log all
occurrence of the application access attempts. In this
scenario, which two actions must be enabled in the
,3|Page
security policy? - Answer-Enable a deny action, Log the
session initiations
What are three primary match criteria used in a Junos
security policy? - Answer-destination address, source
address, application
When configuring antispam, where do you apply any local
lists that are configured? - Answer-custom objects
Which Sky ATP security feed is provided to vSRX devices
by default? - Answer-Command and Control feed
If you need to protect against malicious files that might be
download through Web-based e-mail, which Sky ATP
protection mechanism should you use? - Answer-HTTP file
inspection
The vSRX is available for which two of the following
hypervisors? - Answer-KVM, Hyper-V
Which of these Sky ATP features require a premium or
basic license? - Answer-Threat Intel feeds
, 4|Page
Which order do Junos security devices examine policies
for transit traffic? - Answer-zone policies, global policies,
default policy
What match criteria does an SRX Series device's network
processing unit (NPU) use to determine if a flow already
exists for a packet? - Answer-source port, protocol, unique
session token number for a given zone and virtual router
Which of these can be used to protect against
ransomware attacks? - Answer-Sky ATP
You are creating Ipsec connections. In this scenario, which
two statements are correct about proxy IDs? - Answer-
Proxy IDs are optional for Phase 2 session establishment.,
Proxy IDs are used to configure traffic selectors.
Users in your network are downloading files with file
extensions that you consider to be unsafe for your
network. You must prevent files with specific file
extensions from entering your network. - Answer-Content
filtering
Which of these is not a function provided by UTM? -
Answer-Intrusion prevention
