Boatsmart Modules 1-6 Final Exam
Questions and Answers
operator - ANS-the person who is in control of the pleasure raft and who is responsible
for its operation. You are responsible for yourself, your passengers, your boat, and the
safety of other boaters on the water
pleasure craft - ANS-any vessel, ship, or boat that's only used for pleasure or
recreation.
This includes:
- sport fishing boats
- bow riders
- deck boats
- inboard ski/wakeboard boats
- houseboats
- pontoon boats
- cabin cruisers
- yachts
- personal watercraft
- sailboats
- paddle craft
true - ANS-t or f: if the boat carries goods or passengers for any type of profit, its
considered to be a commercial boat, which will have different rules and regulations
personal watercraft - ANS-PWC is a small watercraft that's equipped with an inboard
engine and is powered by a jet-propulsion system. It will have unique handling
characteristics because of its small size and method of power. You cannot steer this
unless throttle power is applied
power driven craft - ANS-any boat powered by a motor or engine. examples of this
include:
- bow rider
- deck boat
- sport fishing boat
human powered craft - ANS-operates without a motor or engine. you must manually
move these types of boats forward with a paddle, sail, or foot pedals.
examples of this include:
- canoes
- kayaks
,- rowboats
- wind-powered sailboats
sailing vessel - ANS-any boat that's under the power of sail (wind-powered)
true - ANS-t or f: if a sailboat is powered with an engine, its considered to be a
motorized boat and it will be subject to the same rules and regulations that apply to
motorized boats
hull - ANS-portion of the boat that rides both in and on top of the water, which does not
include any masts, sails, rigging, machinery or equipment
planing hull - ANS-type of hull designed to glide on the surface of the water as the boat
gains speed
pontoon hull - ANS-type of hull has two or more to help create lift and flotation
displacement hull - ANS-hull type that is designed to power through the water and is
most often found on larger boats, like sail boats
round bottom - ANS-hull type that is typical to sailboats and canoes, which are less
stable and tend to roll in waves.
one should be very cautious when loading, entering, or exiting as it may roll easily
flat bottom - ANS-hull type that is designed for slow speed and calm water.
these boats tend to be less stable than other hull types in rough water
deep v bottom - ANS-hull type that is the most common type of powerboat hull.
this type of hull allows boats to move through rough water at higher speeds and they
provide a smoother ride than other hull types
multi chine - ANS-hull type that is very stable on the water but can be more difficult to
maneuver, such as catamarans
bow - ANS-forward or front part of the boat
port - ANS-left side of the boat when seated and looking forward
starboard - ANS-right side of the boat when seated and looking forward
stern - ANS-rear section of the boat
transom - ANS-stern cross-section of the boat (literal back curved part of stern)
waterline - ANS-this is the one on the hull at which the boat sits in the water when its
properly loaded with passengers and equipment
,draft - ANS-the depth of water that your boat needs in order to float freely, measured as
the distance from the waterline to the lowest point of the boat
freeboard - ANS-distance from the waterline to the lowest point on the boats deck
propeller - ANS-also known as the prop, which rotates underwater to power your
motorized boat forward or backward
cleat - ANS-metal fitting to which a rope or line can be secured
gunwale - ANS-top edges of the sides of the boat
length - ANS-distance from the tip of the bow to the farthest point on the stern which
excludes a swim platform
beam - ANS-width of your boat at its widest point
handlebars and throttle - ANS-operator steers the personal watercraft through this
object
safety lanyard - ANS-rope or cord that attaches the kill switch to the operator
true - ANS-t or f: if you fall off the PWC, the lanyard will release and shut down the
engine
seat - ANS-area where the operator and passengers sit
jet intake - ANS-area that sucks in water and then passes the water through a high-
speed impeller
jet thrust nozzle - ANS-high powered water travels through this to propel PWC forward
outboard engine - ANS-engine attached to the transform (Stern) of the boat. To steer,
you will move the entire engine and drive assembly. (tiny fishing boat)
In order to avoid hitting bottom in shallow areas, you can move the engine up or down,
manually or electronically
sterndrive engine - ANS-engine will be mounted within the hull of the boat. The lower
unit of the engine (propeller and drive assembly) will be mounted on the transform at the
stern of the boat.
many powerboats have this type of hybrid engine as it combines inboard power with
outboard drive
, inboard engine - ANS-engine were motor and most of the drive assembly will be
mounted within the hull of the boat. This means only the propeller and propeller shaft
will be located outside of the hull
when you move the steering wheel, a rudder which is attached at the stern (not engine
itself) will change the direction of the boats movement
operating a boat powered by more than 10 horsepower - ANS-who is required to have a
boating license in the state of Ohio?
born before January 1 1982 - ANS-What is the exception to the boating license rule in
Ohio?
true - ANS-t or f: according to federal law, motorized boats that are less than 20 feet in
length must have a capacity plate in the steering or helm area and the
recommendations are meant for operation in good weather
true - ANS-t or f: the capacity plate must be permanently displayed where it is clearly in
view for the operator when the boat is underway
boat length in feet X boat width in feet / 15 = number of people - ANS-equation used to
calculate the number of people that a boat can carry safely in good weather:
true - ANS-t or f: all motorized boats are required to be registered
registration number - ANS-mix of letters and numbers that begins with the abbreviation
of the state where your boat is registered
forward half of boat on each side - ANS-where is the boats registration number located?
annually - ANS-how often is the registration certificate renewed (if at all)?
hull identification number (HIN) - ANS-12 digit long number that is permanently marked
on the starboard corner of the stern.
This helps identify:
- model of boat
- serial number of boat
- month and year boat was made
- name of boat manufacturer
trademark it, lock it up, be trailer safe - ANS-what are 3 different ways to prevent a boat
from being stolen?
true - ANS-t or f: all boats are to be equipped with one wearable life jacket for each
passenger on board
Questions and Answers
operator - ANS-the person who is in control of the pleasure raft and who is responsible
for its operation. You are responsible for yourself, your passengers, your boat, and the
safety of other boaters on the water
pleasure craft - ANS-any vessel, ship, or boat that's only used for pleasure or
recreation.
This includes:
- sport fishing boats
- bow riders
- deck boats
- inboard ski/wakeboard boats
- houseboats
- pontoon boats
- cabin cruisers
- yachts
- personal watercraft
- sailboats
- paddle craft
true - ANS-t or f: if the boat carries goods or passengers for any type of profit, its
considered to be a commercial boat, which will have different rules and regulations
personal watercraft - ANS-PWC is a small watercraft that's equipped with an inboard
engine and is powered by a jet-propulsion system. It will have unique handling
characteristics because of its small size and method of power. You cannot steer this
unless throttle power is applied
power driven craft - ANS-any boat powered by a motor or engine. examples of this
include:
- bow rider
- deck boat
- sport fishing boat
human powered craft - ANS-operates without a motor or engine. you must manually
move these types of boats forward with a paddle, sail, or foot pedals.
examples of this include:
- canoes
- kayaks
,- rowboats
- wind-powered sailboats
sailing vessel - ANS-any boat that's under the power of sail (wind-powered)
true - ANS-t or f: if a sailboat is powered with an engine, its considered to be a
motorized boat and it will be subject to the same rules and regulations that apply to
motorized boats
hull - ANS-portion of the boat that rides both in and on top of the water, which does not
include any masts, sails, rigging, machinery or equipment
planing hull - ANS-type of hull designed to glide on the surface of the water as the boat
gains speed
pontoon hull - ANS-type of hull has two or more to help create lift and flotation
displacement hull - ANS-hull type that is designed to power through the water and is
most often found on larger boats, like sail boats
round bottom - ANS-hull type that is typical to sailboats and canoes, which are less
stable and tend to roll in waves.
one should be very cautious when loading, entering, or exiting as it may roll easily
flat bottom - ANS-hull type that is designed for slow speed and calm water.
these boats tend to be less stable than other hull types in rough water
deep v bottom - ANS-hull type that is the most common type of powerboat hull.
this type of hull allows boats to move through rough water at higher speeds and they
provide a smoother ride than other hull types
multi chine - ANS-hull type that is very stable on the water but can be more difficult to
maneuver, such as catamarans
bow - ANS-forward or front part of the boat
port - ANS-left side of the boat when seated and looking forward
starboard - ANS-right side of the boat when seated and looking forward
stern - ANS-rear section of the boat
transom - ANS-stern cross-section of the boat (literal back curved part of stern)
waterline - ANS-this is the one on the hull at which the boat sits in the water when its
properly loaded with passengers and equipment
,draft - ANS-the depth of water that your boat needs in order to float freely, measured as
the distance from the waterline to the lowest point of the boat
freeboard - ANS-distance from the waterline to the lowest point on the boats deck
propeller - ANS-also known as the prop, which rotates underwater to power your
motorized boat forward or backward
cleat - ANS-metal fitting to which a rope or line can be secured
gunwale - ANS-top edges of the sides of the boat
length - ANS-distance from the tip of the bow to the farthest point on the stern which
excludes a swim platform
beam - ANS-width of your boat at its widest point
handlebars and throttle - ANS-operator steers the personal watercraft through this
object
safety lanyard - ANS-rope or cord that attaches the kill switch to the operator
true - ANS-t or f: if you fall off the PWC, the lanyard will release and shut down the
engine
seat - ANS-area where the operator and passengers sit
jet intake - ANS-area that sucks in water and then passes the water through a high-
speed impeller
jet thrust nozzle - ANS-high powered water travels through this to propel PWC forward
outboard engine - ANS-engine attached to the transform (Stern) of the boat. To steer,
you will move the entire engine and drive assembly. (tiny fishing boat)
In order to avoid hitting bottom in shallow areas, you can move the engine up or down,
manually or electronically
sterndrive engine - ANS-engine will be mounted within the hull of the boat. The lower
unit of the engine (propeller and drive assembly) will be mounted on the transform at the
stern of the boat.
many powerboats have this type of hybrid engine as it combines inboard power with
outboard drive
, inboard engine - ANS-engine were motor and most of the drive assembly will be
mounted within the hull of the boat. This means only the propeller and propeller shaft
will be located outside of the hull
when you move the steering wheel, a rudder which is attached at the stern (not engine
itself) will change the direction of the boats movement
operating a boat powered by more than 10 horsepower - ANS-who is required to have a
boating license in the state of Ohio?
born before January 1 1982 - ANS-What is the exception to the boating license rule in
Ohio?
true - ANS-t or f: according to federal law, motorized boats that are less than 20 feet in
length must have a capacity plate in the steering or helm area and the
recommendations are meant for operation in good weather
true - ANS-t or f: the capacity plate must be permanently displayed where it is clearly in
view for the operator when the boat is underway
boat length in feet X boat width in feet / 15 = number of people - ANS-equation used to
calculate the number of people that a boat can carry safely in good weather:
true - ANS-t or f: all motorized boats are required to be registered
registration number - ANS-mix of letters and numbers that begins with the abbreviation
of the state where your boat is registered
forward half of boat on each side - ANS-where is the boats registration number located?
annually - ANS-how often is the registration certificate renewed (if at all)?
hull identification number (HIN) - ANS-12 digit long number that is permanently marked
on the starboard corner of the stern.
This helps identify:
- model of boat
- serial number of boat
- month and year boat was made
- name of boat manufacturer
trademark it, lock it up, be trailer safe - ANS-what are 3 different ways to prevent a boat
from being stolen?
true - ANS-t or f: all boats are to be equipped with one wearable life jacket for each
passenger on board
