PHY 1611 Lab Quizzes With Complete Solutions
Graphical Analysis of Data Quiz
You are told to plot of position vs. time. Which of the following is true? - ANSWER
Position goes on the y (vertical) axis and time goes on the x (horizontal) axis.
Given your standard kinematic equation v=at + v(initial), and the standard
equation for a line y=mx+b, when asked to graph velocity vs. time, graphically
v(initial) would correspond to? - ANSWER The y-axis intercept
You are asked to plot velocity vs. time. The slope of this graph will represent
what physical quantity? - ANSWER Acceleration
You have a position vs. time graph...Two points on the best fit line of this graph
are (1.0s, 5.2m) and (3.7s, 6.4m). Calculate the slope if this graph... - ANSWER
0.44 m/s
In Exercise 3 of today's lab equation 4 describes the behavior of a simple
pendulum. What does T in equation 4 represent? - ANSWER Period
Laboratory Measurements
When recording a manual measurement, which of the following is more correct?
- ANSWER The number of digits to be recorded depends on the instrument being
used, and last digit, in the number recorded, will be a guess.
The SI units for mass, length and time are? - ANSWER Kilograms, meters,
seconds
NOTE: Know how to read device/ diagram of a micrometer - ANSWER
The purpose of this experiment is to? - ANSWER learn the proper use of the
basic laboratory measuring devices and to perform basic laboratory
calculations
The measuring devices we will be using today are: - ANSWER Metric ruler,
micrometer, Vernier caliper, laboratory balance
Position, Velocity, Acceleration
When a mass is being uniformly accelerated that means? - ANSWER The mass is
moving with a constant acceleration
, In this experiment we will be making three graphs. They are? - ANSWER
Acceleration vs. Time
Velocity vs. Time
Position vs. Time
The graph of acceleration vs. time, more or less, will be: - ANSWER A horizontal
line with no slope.
Which of the following equations will describe the velocity vs time graph? -
ANSWER v = v(initial) + at
In this experiment the track that the cart will be moving on should be? - ANSWER
Lay horizontally flat on the table.
Projectile Motion Quiz
The x-component of an object's velocity during projectile motion is? - ANSWER
Constant
For a projectile shot off the top of a table at some arbitrary initial angle, and then
allowed to fall to the floor below which of the following is true regarding its
overall velocity? - ANSWER 45 degree
For a projectile fired on a constant level surface its overall velocity is at a
minimum when? - ANSWER When the projectile is at its max height.
For a projectile motion the equation given in your manual that describes the
range (distance traveled in the horizontal direction) is? - ANSWER delta x =
v(initial)cos(theta)*t
Atwood Machine
The magnitude of the acceleration the masses in our Atwood Machine lab will
experience is? - ANSWER Less than g
The net force acting on the masses in this experiment is given by the equation -
ANSWER F = (M2-M1)g
One of the equations listed in the lab handout that gives the theoretical value of
acceleration in this lab is? - ANSWER a = F/(M2+M1)
If you plot Net Force vs Acceleration what physical quantity will the slope of that
graph represent? - ANSWER Mass
In this experiment we will be using an instrument called 'The Force Sensor' ? -
ANSWER False
Graphical Analysis of Data Quiz
You are told to plot of position vs. time. Which of the following is true? - ANSWER
Position goes on the y (vertical) axis and time goes on the x (horizontal) axis.
Given your standard kinematic equation v=at + v(initial), and the standard
equation for a line y=mx+b, when asked to graph velocity vs. time, graphically
v(initial) would correspond to? - ANSWER The y-axis intercept
You are asked to plot velocity vs. time. The slope of this graph will represent
what physical quantity? - ANSWER Acceleration
You have a position vs. time graph...Two points on the best fit line of this graph
are (1.0s, 5.2m) and (3.7s, 6.4m). Calculate the slope if this graph... - ANSWER
0.44 m/s
In Exercise 3 of today's lab equation 4 describes the behavior of a simple
pendulum. What does T in equation 4 represent? - ANSWER Period
Laboratory Measurements
When recording a manual measurement, which of the following is more correct?
- ANSWER The number of digits to be recorded depends on the instrument being
used, and last digit, in the number recorded, will be a guess.
The SI units for mass, length and time are? - ANSWER Kilograms, meters,
seconds
NOTE: Know how to read device/ diagram of a micrometer - ANSWER
The purpose of this experiment is to? - ANSWER learn the proper use of the
basic laboratory measuring devices and to perform basic laboratory
calculations
The measuring devices we will be using today are: - ANSWER Metric ruler,
micrometer, Vernier caliper, laboratory balance
Position, Velocity, Acceleration
When a mass is being uniformly accelerated that means? - ANSWER The mass is
moving with a constant acceleration
, In this experiment we will be making three graphs. They are? - ANSWER
Acceleration vs. Time
Velocity vs. Time
Position vs. Time
The graph of acceleration vs. time, more or less, will be: - ANSWER A horizontal
line with no slope.
Which of the following equations will describe the velocity vs time graph? -
ANSWER v = v(initial) + at
In this experiment the track that the cart will be moving on should be? - ANSWER
Lay horizontally flat on the table.
Projectile Motion Quiz
The x-component of an object's velocity during projectile motion is? - ANSWER
Constant
For a projectile shot off the top of a table at some arbitrary initial angle, and then
allowed to fall to the floor below which of the following is true regarding its
overall velocity? - ANSWER 45 degree
For a projectile fired on a constant level surface its overall velocity is at a
minimum when? - ANSWER When the projectile is at its max height.
For a projectile motion the equation given in your manual that describes the
range (distance traveled in the horizontal direction) is? - ANSWER delta x =
v(initial)cos(theta)*t
Atwood Machine
The magnitude of the acceleration the masses in our Atwood Machine lab will
experience is? - ANSWER Less than g
The net force acting on the masses in this experiment is given by the equation -
ANSWER F = (M2-M1)g
One of the equations listed in the lab handout that gives the theoretical value of
acceleration in this lab is? - ANSWER a = F/(M2+M1)
If you plot Net Force vs Acceleration what physical quantity will the slope of that
graph represent? - ANSWER Mass
In this experiment we will be using an instrument called 'The Force Sensor' ? -
ANSWER False