ERAILSAFE ACTUAL TEST PAPER 2026
COMPLETE QUESTIONS AND CORRECT
ANSWERS VERIFIED A+
●● Only one qualified roadway working "employee in charge".
Answer: Establishes and controls working limits for the purpose of on
track safety.
●● Csx will monitor effectiveness of roadway worker compliance by.
Answer: Conducting operational test done quarterly.
●● Do not perform any work that:.
Answer: Interferes with safe passage
Not properly protected
Not in accordance with operating rules
Interferes with the proper functioning of switch machines or code
apparatus
Interferes with the proper functioning of digital machines or code
apparatus.
●● Do not operate and switch or derail a:.
Answer: Controlled track without the permission of the train dispatcher.
,●● An employee must obtain the required permission from the train
dispatcher before taking a controlled location off line and maintain
communication with the.
Answer: Train dispatcher after receiving permission.
●● Upon discovery of damage to a facility.
Answer: Make the necessary repairs and report to designated supervisor
and the chief train dispatcher.
●● Engineering.
Answer: Make the request directly to the train dispatcher.
Make certain that the proper signs are displayed.
●● Train dispatcher.
Answer: Repeat the entire request and issue the restriction.
●● When handling gasoline or other flammable keep material away
from:.
Answer: Operating internal combustion engines
Smoking
Open flumes
, ●● All parked or secured equipment and vehicles must remain a
minimum of.
Answer: 7 feet from the nearest rail of any track unless protected by the
appropriate track protection.
●● A train list or line up provided by the dispatcher must be:.
Answer: Recorder in writing by the receiving employee. It is for
informational purposes only and does not authorize any employee to
foul a track.
●● Work performed by contractors must be monitored to ensure:.
Answer: No work, activity, or equipment interferes either the safe
passage and neither contractors nor their equipment fouls a track unless
protection has been provided.
●● Employees operating switches or details are responsible for the
position of the devices and must:.
Answer: Visually determine switches and details are properly lined for
the intended route and obtain permission form the dispatcher, yard
master or other designated employee before switches and details are
spiked.
●● When hand operated switches are used on a non signaled main track,
before releasing an authority or reporting by a specific location the
emptor employee-in-charge must:.
COMPLETE QUESTIONS AND CORRECT
ANSWERS VERIFIED A+
●● Only one qualified roadway working "employee in charge".
Answer: Establishes and controls working limits for the purpose of on
track safety.
●● Csx will monitor effectiveness of roadway worker compliance by.
Answer: Conducting operational test done quarterly.
●● Do not perform any work that:.
Answer: Interferes with safe passage
Not properly protected
Not in accordance with operating rules
Interferes with the proper functioning of switch machines or code
apparatus
Interferes with the proper functioning of digital machines or code
apparatus.
●● Do not operate and switch or derail a:.
Answer: Controlled track without the permission of the train dispatcher.
,●● An employee must obtain the required permission from the train
dispatcher before taking a controlled location off line and maintain
communication with the.
Answer: Train dispatcher after receiving permission.
●● Upon discovery of damage to a facility.
Answer: Make the necessary repairs and report to designated supervisor
and the chief train dispatcher.
●● Engineering.
Answer: Make the request directly to the train dispatcher.
Make certain that the proper signs are displayed.
●● Train dispatcher.
Answer: Repeat the entire request and issue the restriction.
●● When handling gasoline or other flammable keep material away
from:.
Answer: Operating internal combustion engines
Smoking
Open flumes
, ●● All parked or secured equipment and vehicles must remain a
minimum of.
Answer: 7 feet from the nearest rail of any track unless protected by the
appropriate track protection.
●● A train list or line up provided by the dispatcher must be:.
Answer: Recorder in writing by the receiving employee. It is for
informational purposes only and does not authorize any employee to
foul a track.
●● Work performed by contractors must be monitored to ensure:.
Answer: No work, activity, or equipment interferes either the safe
passage and neither contractors nor their equipment fouls a track unless
protection has been provided.
●● Employees operating switches or details are responsible for the
position of the devices and must:.
Answer: Visually determine switches and details are properly lined for
the intended route and obtain permission form the dispatcher, yard
master or other designated employee before switches and details are
spiked.
●● When hand operated switches are used on a non signaled main track,
before releasing an authority or reporting by a specific location the
emptor employee-in-charge must:.
