ACI EPOXY ANCHORS EXAM
QUESTIONS AND ANSWERS 2026
VERIFIED.
As specified concrete temperature can vary from ? in this ESR, anchors shall not be used for
applications where the in-service or less to ? or higher within a 12-hour period. - ANS 40°F
(5°C), 80°F (27°C)
According to ESR-2583, the peak temperature of the concrete in which an anchor can be
installed is: - ANS 104 F (40 C)
Percentages of anchors to be proof-loaded are: - ANS D. Specified in the contract documents
Proof loading is applied as confined tension tests and shall not exceed: - ANS 50% expected
peak load based on adhesive bond strength or 80% of the anchor yield strength
According to ESR-2583, storage of the adhesive product prior to and during use shall be -
ANS In a cool, dry, and well-ventilated area
Prior to installation, the inspector must check the anchor elements for: - ANS Substances that
may affect bond and thread damage
@2026/2027 ALLRIGHTS RESERVED.
QUESTIONS AND ANSWERS 2026
VERIFIED.
As specified concrete temperature can vary from ? in this ESR, anchors shall not be used for
applications where the in-service or less to ? or higher within a 12-hour period. - ANS 40°F
(5°C), 80°F (27°C)
According to ESR-2583, the peak temperature of the concrete in which an anchor can be
installed is: - ANS 104 F (40 C)
Percentages of anchors to be proof-loaded are: - ANS D. Specified in the contract documents
Proof loading is applied as confined tension tests and shall not exceed: - ANS 50% expected
peak load based on adhesive bond strength or 80% of the anchor yield strength
According to ESR-2583, storage of the adhesive product prior to and during use shall be -
ANS In a cool, dry, and well-ventilated area
Prior to installation, the inspector must check the anchor elements for: - ANS Substances that
may affect bond and thread damage
@2026/2027 ALLRIGHTS RESERVED.