NDT Level II Technician Examination
Practice Test Questions And Correct
Answers (Verified Answers) Plus
Rationales 2026 Q&A Instant Download
Pdf
1. What is the primary purpose of Non-Destructive Testing (NDT)?
A. To destroy defective components
B. To evaluate material properties without causing damage
C. To improve welding speed
D. To reduce manufacturing costs
Answer: B
Rationale: NDT methods are specifically designed to assess materials and
components without altering or damaging their usability.
2. Which NDT method uses high-frequency sound waves?
A. Radiographic Testing
B. Magnetic Particle Testing
C. Ultrasonic Testing
D. Eddy Current Testing
,Answer: C
Rationale: Ultrasonic Testing (UT) uses high-frequency sound waves to detect
internal flaws.
3. Which method is best for detecting surface cracks in ferromagnetic
materials?
A. Liquid Penetrant Testing
B. Ultrasonic Testing
C. Magnetic Particle Testing
D. Radiographic Testing
Answer: C
Rationale: Magnetic Particle Testing (MT) is ideal for detecting surface and near-
surface discontinuities in ferromagnetic materials.
4. What type of radiation is used in Radiographic Testing (RT)?
A. Infrared rays
B. X-rays or gamma rays
C. Radio waves
D. Ultraviolet rays
Answer: B
Rationale: RT uses X-rays or gamma rays to penetrate materials and produce
images of internal structures.
5. Which NDT method is most sensitive to small surface discontinuities?
A. Radiographic Testing
B. Ultrasonic Testing
C. Liquid Penetrant Testing
D. Eddy Current Testing
,Answer: C
Rationale: Liquid Penetrant Testing (PT) is highly sensitive to fine surface-
breaking defects.
6. In Ultrasonic Testing, what does A-scan display?
A. 3D image
B. Cross-sectional image
C. Signal amplitude vs. time
D. Color mapping
Answer: C
Rationale: A-scan presents signal amplitude against time, helping identify flaw
depth and size.
7. What is the function of a couplant in UT?
A. Amplify signals
B. Reduce noise
C. Facilitate sound transmission
D. Increase frequency
Answer: C
Rationale: Couplant removes air gaps and allows efficient transmission of
ultrasonic waves.
8. Eddy Current Testing is primarily used on:
A. Non-conductive materials
B. Conductive materials
C. Ferromagnetic materials only
D. Plastics
, Answer: B
Rationale: Eddy Current Testing (ET) relies on electromagnetic induction in
conductive materials.
9. Which discontinuity is best detected by RT?
A. Surface cracks
B. Subsurface inclusions
C. Paint defects
D. Corrosion pits
Answer: B
Rationale: RT is excellent for detecting internal flaws like inclusions and voids.
10.What is the skin effect in Eddy Current Testing?
A. Surface corrosion
B. Current concentration near surface
C. Magnetic leakage
D. Heat buildup
Answer: B
Rationale: Skin effect refers to eddy currents being strongest near the surface of
a conductor.
11.What is the main limitation of Liquid Penetrant Testing?
A. Cannot detect internal defects
B. Requires electricity
C. Expensive equipment
D. Slow process
Answer: A
Rationale: PT can only detect surface-breaking defects, not internal ones.
Practice Test Questions And Correct
Answers (Verified Answers) Plus
Rationales 2026 Q&A Instant Download
1. What is the primary purpose of Non-Destructive Testing (NDT)?
A. To destroy defective components
B. To evaluate material properties without causing damage
C. To improve welding speed
D. To reduce manufacturing costs
Answer: B
Rationale: NDT methods are specifically designed to assess materials and
components without altering or damaging their usability.
2. Which NDT method uses high-frequency sound waves?
A. Radiographic Testing
B. Magnetic Particle Testing
C. Ultrasonic Testing
D. Eddy Current Testing
,Answer: C
Rationale: Ultrasonic Testing (UT) uses high-frequency sound waves to detect
internal flaws.
3. Which method is best for detecting surface cracks in ferromagnetic
materials?
A. Liquid Penetrant Testing
B. Ultrasonic Testing
C. Magnetic Particle Testing
D. Radiographic Testing
Answer: C
Rationale: Magnetic Particle Testing (MT) is ideal for detecting surface and near-
surface discontinuities in ferromagnetic materials.
4. What type of radiation is used in Radiographic Testing (RT)?
A. Infrared rays
B. X-rays or gamma rays
C. Radio waves
D. Ultraviolet rays
Answer: B
Rationale: RT uses X-rays or gamma rays to penetrate materials and produce
images of internal structures.
5. Which NDT method is most sensitive to small surface discontinuities?
A. Radiographic Testing
B. Ultrasonic Testing
C. Liquid Penetrant Testing
D. Eddy Current Testing
,Answer: C
Rationale: Liquid Penetrant Testing (PT) is highly sensitive to fine surface-
breaking defects.
6. In Ultrasonic Testing, what does A-scan display?
A. 3D image
B. Cross-sectional image
C. Signal amplitude vs. time
D. Color mapping
Answer: C
Rationale: A-scan presents signal amplitude against time, helping identify flaw
depth and size.
7. What is the function of a couplant in UT?
A. Amplify signals
B. Reduce noise
C. Facilitate sound transmission
D. Increase frequency
Answer: C
Rationale: Couplant removes air gaps and allows efficient transmission of
ultrasonic waves.
8. Eddy Current Testing is primarily used on:
A. Non-conductive materials
B. Conductive materials
C. Ferromagnetic materials only
D. Plastics
, Answer: B
Rationale: Eddy Current Testing (ET) relies on electromagnetic induction in
conductive materials.
9. Which discontinuity is best detected by RT?
A. Surface cracks
B. Subsurface inclusions
C. Paint defects
D. Corrosion pits
Answer: B
Rationale: RT is excellent for detecting internal flaws like inclusions and voids.
10.What is the skin effect in Eddy Current Testing?
A. Surface corrosion
B. Current concentration near surface
C. Magnetic leakage
D. Heat buildup
Answer: B
Rationale: Skin effect refers to eddy currents being strongest near the surface of
a conductor.
11.What is the main limitation of Liquid Penetrant Testing?
A. Cannot detect internal defects
B. Requires electricity
C. Expensive equipment
D. Slow process
Answer: A
Rationale: PT can only detect surface-breaking defects, not internal ones.
