AFAB 110 FINAL | QUESTIONS AND ANSWERS | WITH
COMPLETE SOLUTION.
The word print can best be used the same as the word _____________ Answer
- Drawing
In many cases, the print is also an important part of a _______________ in the
industrial setting. Answer - Contract
The study of print reading is closely related to the study of _____________, the
general term for creating drawings of objects in technical fields. Answer -
Drafting
PDF is an electronic file format that allows the user to share a drawing or image
without giving them the actual CAD data file. PDF stands for
__________________. Answer - Portable Document Format
A voluntary guideline that establishes the method of representation for prints,
as well as other engineering practices, is a ________________. Answer -
Standard
Identify the line below that is fictitious. Answer - Dotted line
Cutting-plane lines are easily identifiable due to the appearance of a(n)
___________ on each end of the line. Answer - Arrowhead
, Identify the line below that is to be drawn thick. Answer - Cutting-plane line
The standardized list of line types, perhaps in the form of a chart, is defined in
many references as the ________________. Answer - Alphabet of line
Print reading is the process of analyzing a print to obtain information. This task
involves two principal elements: visualization and _____________. Answer -
Interpretation
If a D-size sheet of paper is properly cut, how many A-size sheets should result?
Answer - 8
For which of the following is least likely to be found on a basic parts list?
Answer - Finish
A block that is important to read in the early stage of examining a print is the
___________ block, which helps determine if the print being observed is up-to-
date. Answer - Revision history
Which of the following is least likely to be found on a basic parts list? Answer -
Finish
The word that basically means "cut in half" is _______________. Answer -
Bisect
If a hexagon is inscribed within a circle, the diameter of the circle is equivalent
to the term __________. Answer - Across-the-corners
In most CAD systems, the basic geometric forms used to create complex
models are referred to as _______________. Answer - Primitives
COMPLETE SOLUTION.
The word print can best be used the same as the word _____________ Answer
- Drawing
In many cases, the print is also an important part of a _______________ in the
industrial setting. Answer - Contract
The study of print reading is closely related to the study of _____________, the
general term for creating drawings of objects in technical fields. Answer -
Drafting
PDF is an electronic file format that allows the user to share a drawing or image
without giving them the actual CAD data file. PDF stands for
__________________. Answer - Portable Document Format
A voluntary guideline that establishes the method of representation for prints,
as well as other engineering practices, is a ________________. Answer -
Standard
Identify the line below that is fictitious. Answer - Dotted line
Cutting-plane lines are easily identifiable due to the appearance of a(n)
___________ on each end of the line. Answer - Arrowhead
, Identify the line below that is to be drawn thick. Answer - Cutting-plane line
The standardized list of line types, perhaps in the form of a chart, is defined in
many references as the ________________. Answer - Alphabet of line
Print reading is the process of analyzing a print to obtain information. This task
involves two principal elements: visualization and _____________. Answer -
Interpretation
If a D-size sheet of paper is properly cut, how many A-size sheets should result?
Answer - 8
For which of the following is least likely to be found on a basic parts list?
Answer - Finish
A block that is important to read in the early stage of examining a print is the
___________ block, which helps determine if the print being observed is up-to-
date. Answer - Revision history
Which of the following is least likely to be found on a basic parts list? Answer -
Finish
The word that basically means "cut in half" is _______________. Answer -
Bisect
If a hexagon is inscribed within a circle, the diameter of the circle is equivalent
to the term __________. Answer - Across-the-corners
In most CAD systems, the basic geometric forms used to create complex
models are referred to as _______________. Answer - Primitives
