FIXED PROSTHODONTICS EXAM 2 ASSESSMENT TEST 2026 TESTED QUESTIONS WITH FULL SOLUTION GRADED A+

FIXED PROSTHODONTICS EXAM 2
ASSESSMENT TEST 2026 TESTED QUESTIONS
WITH FULL SOLUTION GRADED A+

◉ When making master impressions for a patient being treated with
maxillary and mandibular complete denture prostheses the:


1. polysulfide rubber base impression material should be mixed in a
ratio of one part catalyst to one part base.
2. polysulfide rubber base impression material should be mixed in a
whipping motion to make the material lighter and less viscous.
3. tray adhesive should be placed on the compound borders of the
tray to prevent distortion of the impression.


A. 1, 2
B. 1, 3
C. 2, 3
D. all of the above
E. none of the above Answer: B


◉ As a rule of thumb when fabricating the mandibular occlusal rim
the:

,1. incisal edge height should be 22mm from the mucobuccal fold.
2. posterior height should be 1/2 to 2/3 up the retromolar pad.
3. posterior rim should be centered over the residual ridge.


A. 1, 2
B. 1, 3
C. 2, 3
D. all of the above
E. none of the above Answer: C


◉ Complete denture retention is accomplished by:


1. muscular coordination.
2. polished surface contour.
3. saliva properties.


A. 1, 2
B. 1, 3
C. 2, 3
D. all of the above
E. none of the above Answer: D

, ◉ As a rule of thumb when fabricating the mandibular occlusal rim
the:


1. incisal edge height should be 18mm from the mucobuccal fold.
2. posterior height should be 1⁄2to 2/3 up the retromolar pad.
3. posterior rim should be centered over the residual ridge.


A. 1, 2
B. 1, 3
C. 2, 3
D. all of the above
E. none of the above Answer: D


◉ When fabricating mandibular record bases for the edentulous
patient:


1. the mucobuccal fold should be filled with resin.
2. all apparent undercuts should be minimally blocked out with pink
baseplate wax.
3. the resin should be thinned on the occlusal and buccal to the
edentulous ridge.