CSLB C10 | 100% Correct Answers | A+
Guide
• Mobile home service equipment shall be line of sight and no more than
____ from the exterior wall of the home -✓✓30'
• If a service conductor is over 300V but less than 600V, what is the
minimum clearance of that service conductor if it runs in residential and
commercial areas that are not subject to traffic? -✓✓15'
• A power meter must be a minimum of ____ feet away from any door,
gas meter, or window opening. -✓✓3
• A rod-type grounding electrode should have a minimum diameter of -
✓✓5/8"
• Conductors entering buildings shall be protected: -✓✓To the point of
entrance
• A grounding electrode must be in contact with soil a minimum: -✓✓8'
• If a raceway has various conductors coming from different systems,
then you should group each system separately every: -✓✓6'
• What is the maximum distance a service conductor can run over a
roof? -✓✓6'
• Soldered connections are not permitted for -✓✓Grounded connections
• Refer to diagram. If you have 0 to 150 nominal voltage to ground, then
what is the minimum clear distance required from such equipment? -
✓✓3'
Guide
• Mobile home service equipment shall be line of sight and no more than
____ from the exterior wall of the home -✓✓30'
• If a service conductor is over 300V but less than 600V, what is the
minimum clearance of that service conductor if it runs in residential and
commercial areas that are not subject to traffic? -✓✓15'
• A power meter must be a minimum of ____ feet away from any door,
gas meter, or window opening. -✓✓3
• A rod-type grounding electrode should have a minimum diameter of -
✓✓5/8"
• Conductors entering buildings shall be protected: -✓✓To the point of
entrance
• A grounding electrode must be in contact with soil a minimum: -✓✓8'
• If a raceway has various conductors coming from different systems,
then you should group each system separately every: -✓✓6'
• What is the maximum distance a service conductor can run over a
roof? -✓✓6'
• Soldered connections are not permitted for -✓✓Grounded connections
• Refer to diagram. If you have 0 to 150 nominal voltage to ground, then
what is the minimum clear distance required from such equipment? -
✓✓3'
