Illinois Security Contractor Licensing Actual
Exam And Practice Tests Newest With Complete
Questions And Correct Detailed Answers| Brand
New Version!
Question: What is the purpose of implementing general procedures for controlling access to
military installations and facilities? Answer: The purpose is to meet minimum Federal
standards for access control, safeguard personnel and facilities, protect capabilities, and
accomplish the mission. (Reference: DOD 5200.08-R, Chapter 3, Section C3.1).
Question: How should DoD Components develop policies regarding access control to
installations and facilities? Answer: DoD Components should develop uniform policies
supporting interoperable procedures for access control, including implementing antiterrorism
standards, developing operational concepts, using random antiterrorism measures, designating
restricted areas, and enforcing security measures. (Reference: DOD 5200.08-R, Chapter 3,
Section C3.2).
Question: What are the specific standards for identification credentials and access to military
installations according to HSPD-12 and FIPS 201-1? Answer: The specific standards
include issuing secure and reliable identification to Federal employees and contractors,
conducting National Agency Checks with Inquiries (NACI) or equivalent national security
clearances for credential issuance, distinguishing credentials based on completed
NACI/equivalent checks, and using temporary visitor identification systems for occasional
visitors. (Reference: DOD 5200.08-R, Chapter 3, Section C3.3).
Question: How should commanders plan for increasing vigilance and restricting access during
emergencies at military installations? Answer: Commanders should establish force protection
working groups, coordinate with officials, maintain positive identification systems, install
physical barriers, pre-designate resources, and exercise contingency plans to validate their
effectiveness during emergencies. (Reference: DOD 5200.08-R, Chapter 3, Section C3.4).
Question: What is the purpose of requiring commanders to plan for increasing vigilance and
restricting access during emergencies at military installations? Answer: The purpose is to
ensure preparedness and security during national emergencies, disasters, terrorist threats,
criminal activities, civil disturbances, or other contingencies that could affect the ability of
installation personnel to perform their mission effectively. (Reference: DOD 5200.08-R, Chapter
3, Section C3.4).
Question: What are some key elements that commanders should include in their emergency
planning related to access control? Answer: Commanders should include establishing force
protection working groups, coordinating with officials, maintaining positive identification
systems, installing physical barriers, pre-designating resources, and exercising contingency plans
to validate their effectiveness. (Reference: DOD 5200.08-R, Chapter 3, Section C3.4).
Question: How should coordination with local, state, Federal, or host-country officials be
handled during emergency planning for access control? Answer: Coordination should aim to
1|Page
,maintain the integrity of restricted access to the installation and reduce the impact on
surrounding civilian communities. (Reference: DOD 5200.08-R, Chapter 3, Section C3.4).
Question: What role does the establishment of a system for positive identification play in
emergency planning for access control? Answer: It ensures that only authorized personnel
and equipment can enter and exit the installation during emergencies, enhancing security and
response capabilities. (Reference: DOD 5200.08-R, Chapter 3, Section C3.4).
Question: What are the construction standards for Class A vaults according to DODM 5200.01
Volume 3, Appendix to Enclosure 3? Answer: Class A vaults must be constructed using concrete
poured-in-place. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section
1.a.1).
Question: What type of vault meets the GSA-approved modular vault specifications as outlined
in DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: Class B vaults meet the
GSA-approved modular vault specifications. (Reference: DODM 5200.01, Volume 3, Appendix
to Enclosure 3, Section 1.a.2).
Question: Is Class C (steel-lined vault) authorized for the protection of classified information
according to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: No, Class C (steel-
lined vault) is not authorized for the protection of classified information. (Reference: DODM
5200.01, Volume 3, Appendix to Enclosure 3, Section 1.a.3).
Question: What materials are permissible for the construction of walls, floor, and roof in open
storage areas (Secure Rooms) according to DODM 5200.01 Volume 3, Appendix to Enclosure
3? Answer: Walls, floor, and roof in open storage areas can be constructed using materials
such as plaster, gypsum wallboard, metal panels, hardboard, wood, plywood, or other materials
resistant to unauthorized entry. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure
3, Section 1.b.1).
Question: What type of lock is required for access doors in Secure Rooms according to DODM
5200.01 Volume 3, Appendix to Enclosure 3? Answer: Access doors in Secure Rooms
must be equipped with a GSA-approved combination lock meeting FF-L-2740 standards.
(Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 1.b.3).
Question: How should windows be protected in Secure Rooms according to DODM 5200.01
Volume 3, Appendix to Enclosure 3? Answer: Windows less than 18 feet above the ground or
easily accessible must be protected from forced entry. This protection can be achieved by using
materials that provide protection equal to the strength of the contiguous walls. (Reference:
DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 1.b.4.a).
Question: What is the requirement for utility openings such as ducts and vents in open storage
areas (Secure Rooms) according to DODM 5200.01 Volume 3, Appendix to Enclosure 3?
Answer: Utility openings must be smaller than man-passable (96 square inches) and
hardened in accordance with Military Handbook 1013/1A if larger. (Reference: DODM 5200.01,
Volume 3, Appendix to Enclosure 3, Section 1.b.5).
Question: What is the requirement for perimeter entrance control at secure facilities during
working hours according to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer:
Perimeter entrances to secure facilities must be under control at all times during working hours
2|Page
,to prevent entry by unauthorized personnel. (Reference: DODM 5200.01, Volume 3, Appendix
to Enclosure 3, Section 3.a).
Question: How can visual control be achieved at a secure facility's perimeter entrance as per
DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: Visual control can be
accomplished through methods such as designated employees, guards, or continuously monitored
closed-circuit television (CCTV). (Reference: DODM 5200.01, Volume 3, Appendix to
Enclosure 3, Section 3.a.1).
Question: What is an automated entry control system (AECS) according to DODM 5200.01
Volume 3, Appendix to Enclosure 3? Answer: An AECS is a system that identifies an individual
and authenticates their authority to enter a secure area through the use of an identification (ID)
badge or card. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 3.a.2).
Question: What are the acceptable methods for authentication in an AECS according to DODM
5200.01 Volume 3, Appendix to Enclosure 3? Answer: Authentication methods in an
AECS include using identification badges/cards with embedded sensors, biometrics verification,
personal identification numbers (PINs), and electronic databases of authorized individuals.
(Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 3.a.2.b).
Question: What must be done when an individual's authorization to enter an area is removed
according to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: A procedure must be
established to remove the individual's authorization upon reassignment, transfer, termination, or
suspension/revocation/downgrading of access. (Reference: DODM 5200.01, Volume 3,
Appendix to Enclosure 3, Section 3.a.4).
Question: What is the requirement for perimeter entrance control at secure facilities during
working hours according to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer:
Perimeter entrances to secure facilities must be under control at all times during working hours
to prevent entry by unauthorized personnel. (Reference: DODM 5200.01, Volume 3, Appendix
to Enclosure 3, Section 3.a).
Question: How can visual control be achieved at a secure facility's perimeter entrance as per
DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: Visual control can be
accomplished through methods such as designated employees, guards, or continuously monitored
closed-circuit television (CCTV). (Reference: DODM 5200.01, Volume 3, Appendix to
Enclosure 3, Section 3.a.1).
Question: What is an automated entry control system (AECS) according to DODM 5200.01
Volume 3, Appendix to Enclosure 3? Answer: An AECS is a system that identifies an individual
and authenticates their authority to enter a secure area through the use of an identification (ID)
badge or card. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 3.a.2).
Question: What are the acceptable methods for authentication in an AECS according to DODM
5200.01 Volume 3, Appendix to Enclosure 3? Answer: Authentication methods in an
AECS include using identification badges/cards with embedded sensors, biometrics verification,
personal identification numbers (PINs), and electronic databases of authorized individuals.
(Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 3.a.2.b).
3|Page
, Question: What must be done when an individual's authorization to enter an area is removed
according to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: A procedure must be
established to remove the individual's authorization upon reassignment, transfer, termination, or
suspension/revocation/downgrading of access. (Reference: DODM 5200.01, Volume 3,
Appendix to Enclosure 3, Section 3.a.4).
Question: What is the purpose of an IDS according to DODM 5200.01 Volume 3, Appendix to
Enclosure 3? Answer: The purpose of an IDS is to detect unauthorized penetrations into
secured areas and to serve as a supplemental control when warranted by a risk assessment.
(Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 2.a).
Question: When is the use of an IDS considered warranted according to DODM 5200.01 Volume
3, Appendix to Enclosure 3? Answer: The use of an IDS is considered warranted when the
results of a documented risk assessment determine its use as a supplemental control, in
accordance with Enclosure 3, sections 3 and 4 of this Volume, and when approved by the activity
head. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 2.a).
Question: How does an IDS complement other physical security measures according to DODM
5200.01 Volume 3, Appendix to Enclosure 3? Answer: An IDS complements other
physical security measures by consisting of intrusion detection equipment (IDE), security forces,
and operating procedures. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3,
Section 2.a).
Question: What are the components of an IDS system according to DODM 5200.01 Volume 3,
Appendix to Enclosure 3? Answer: An IDS system consists of intrusion detection equipment
(IDE), security forces, and operating procedures that operate as a system with distinct phases:
detection, communications, assessment, and response. (Reference: DODM 5200.01, Volume 3,
Appendix to Enclosure 3, Section 2.b.1).
Question: How does an IDS contribute to maintaining an acceptable degree of protection
according to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: An IDS contributes
to maintaining an acceptable degree of protection by detecting alarm conditions, communicating
these conditions to security personnel, assessing situations, and initiating response actions to
safeguard secure areas. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3,
Section 2.b.1-2).
Question: What are the components of an IDS system according to DODM 5200.01 Volume 3,
Appendix to Enclosure 3? Answer: An IDS system consists of intrusion detection equipment
(IDE), security forces, and operating procedures that operate as a system with four distinct
phases: detection, communications, assessment, and response. (Reference: DODM 5200.01,
Volume 3, Appendix to Enclosure 3, Section 2.b.1).
Question: What is the purpose of the detection phase in an IDS system according to DODM
5200.01 Volume 3, Appendix to Enclosure 3? Answer: During the detection phase, a
detector or sensor senses and reacts to the stimuli it is designed to detect, transmitting the sensor
alarm condition to the premise control unit (PCU) over cabling located within the protected area.
(Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 2.b.2.a).
Question: How does an IDS system handle communications during an alarm condition according
to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: The PCU receives signals
4|Page
Exam And Practice Tests Newest With Complete
Questions And Correct Detailed Answers| Brand
New Version!
Question: What is the purpose of implementing general procedures for controlling access to
military installations and facilities? Answer: The purpose is to meet minimum Federal
standards for access control, safeguard personnel and facilities, protect capabilities, and
accomplish the mission. (Reference: DOD 5200.08-R, Chapter 3, Section C3.1).
Question: How should DoD Components develop policies regarding access control to
installations and facilities? Answer: DoD Components should develop uniform policies
supporting interoperable procedures for access control, including implementing antiterrorism
standards, developing operational concepts, using random antiterrorism measures, designating
restricted areas, and enforcing security measures. (Reference: DOD 5200.08-R, Chapter 3,
Section C3.2).
Question: What are the specific standards for identification credentials and access to military
installations according to HSPD-12 and FIPS 201-1? Answer: The specific standards
include issuing secure and reliable identification to Federal employees and contractors,
conducting National Agency Checks with Inquiries (NACI) or equivalent national security
clearances for credential issuance, distinguishing credentials based on completed
NACI/equivalent checks, and using temporary visitor identification systems for occasional
visitors. (Reference: DOD 5200.08-R, Chapter 3, Section C3.3).
Question: How should commanders plan for increasing vigilance and restricting access during
emergencies at military installations? Answer: Commanders should establish force protection
working groups, coordinate with officials, maintain positive identification systems, install
physical barriers, pre-designate resources, and exercise contingency plans to validate their
effectiveness during emergencies. (Reference: DOD 5200.08-R, Chapter 3, Section C3.4).
Question: What is the purpose of requiring commanders to plan for increasing vigilance and
restricting access during emergencies at military installations? Answer: The purpose is to
ensure preparedness and security during national emergencies, disasters, terrorist threats,
criminal activities, civil disturbances, or other contingencies that could affect the ability of
installation personnel to perform their mission effectively. (Reference: DOD 5200.08-R, Chapter
3, Section C3.4).
Question: What are some key elements that commanders should include in their emergency
planning related to access control? Answer: Commanders should include establishing force
protection working groups, coordinating with officials, maintaining positive identification
systems, installing physical barriers, pre-designating resources, and exercising contingency plans
to validate their effectiveness. (Reference: DOD 5200.08-R, Chapter 3, Section C3.4).
Question: How should coordination with local, state, Federal, or host-country officials be
handled during emergency planning for access control? Answer: Coordination should aim to
1|Page
,maintain the integrity of restricted access to the installation and reduce the impact on
surrounding civilian communities. (Reference: DOD 5200.08-R, Chapter 3, Section C3.4).
Question: What role does the establishment of a system for positive identification play in
emergency planning for access control? Answer: It ensures that only authorized personnel
and equipment can enter and exit the installation during emergencies, enhancing security and
response capabilities. (Reference: DOD 5200.08-R, Chapter 3, Section C3.4).
Question: What are the construction standards for Class A vaults according to DODM 5200.01
Volume 3, Appendix to Enclosure 3? Answer: Class A vaults must be constructed using concrete
poured-in-place. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section
1.a.1).
Question: What type of vault meets the GSA-approved modular vault specifications as outlined
in DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: Class B vaults meet the
GSA-approved modular vault specifications. (Reference: DODM 5200.01, Volume 3, Appendix
to Enclosure 3, Section 1.a.2).
Question: Is Class C (steel-lined vault) authorized for the protection of classified information
according to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: No, Class C (steel-
lined vault) is not authorized for the protection of classified information. (Reference: DODM
5200.01, Volume 3, Appendix to Enclosure 3, Section 1.a.3).
Question: What materials are permissible for the construction of walls, floor, and roof in open
storage areas (Secure Rooms) according to DODM 5200.01 Volume 3, Appendix to Enclosure
3? Answer: Walls, floor, and roof in open storage areas can be constructed using materials
such as plaster, gypsum wallboard, metal panels, hardboard, wood, plywood, or other materials
resistant to unauthorized entry. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure
3, Section 1.b.1).
Question: What type of lock is required for access doors in Secure Rooms according to DODM
5200.01 Volume 3, Appendix to Enclosure 3? Answer: Access doors in Secure Rooms
must be equipped with a GSA-approved combination lock meeting FF-L-2740 standards.
(Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 1.b.3).
Question: How should windows be protected in Secure Rooms according to DODM 5200.01
Volume 3, Appendix to Enclosure 3? Answer: Windows less than 18 feet above the ground or
easily accessible must be protected from forced entry. This protection can be achieved by using
materials that provide protection equal to the strength of the contiguous walls. (Reference:
DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 1.b.4.a).
Question: What is the requirement for utility openings such as ducts and vents in open storage
areas (Secure Rooms) according to DODM 5200.01 Volume 3, Appendix to Enclosure 3?
Answer: Utility openings must be smaller than man-passable (96 square inches) and
hardened in accordance with Military Handbook 1013/1A if larger. (Reference: DODM 5200.01,
Volume 3, Appendix to Enclosure 3, Section 1.b.5).
Question: What is the requirement for perimeter entrance control at secure facilities during
working hours according to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer:
Perimeter entrances to secure facilities must be under control at all times during working hours
2|Page
,to prevent entry by unauthorized personnel. (Reference: DODM 5200.01, Volume 3, Appendix
to Enclosure 3, Section 3.a).
Question: How can visual control be achieved at a secure facility's perimeter entrance as per
DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: Visual control can be
accomplished through methods such as designated employees, guards, or continuously monitored
closed-circuit television (CCTV). (Reference: DODM 5200.01, Volume 3, Appendix to
Enclosure 3, Section 3.a.1).
Question: What is an automated entry control system (AECS) according to DODM 5200.01
Volume 3, Appendix to Enclosure 3? Answer: An AECS is a system that identifies an individual
and authenticates their authority to enter a secure area through the use of an identification (ID)
badge or card. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 3.a.2).
Question: What are the acceptable methods for authentication in an AECS according to DODM
5200.01 Volume 3, Appendix to Enclosure 3? Answer: Authentication methods in an
AECS include using identification badges/cards with embedded sensors, biometrics verification,
personal identification numbers (PINs), and electronic databases of authorized individuals.
(Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 3.a.2.b).
Question: What must be done when an individual's authorization to enter an area is removed
according to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: A procedure must be
established to remove the individual's authorization upon reassignment, transfer, termination, or
suspension/revocation/downgrading of access. (Reference: DODM 5200.01, Volume 3,
Appendix to Enclosure 3, Section 3.a.4).
Question: What is the requirement for perimeter entrance control at secure facilities during
working hours according to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer:
Perimeter entrances to secure facilities must be under control at all times during working hours
to prevent entry by unauthorized personnel. (Reference: DODM 5200.01, Volume 3, Appendix
to Enclosure 3, Section 3.a).
Question: How can visual control be achieved at a secure facility's perimeter entrance as per
DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: Visual control can be
accomplished through methods such as designated employees, guards, or continuously monitored
closed-circuit television (CCTV). (Reference: DODM 5200.01, Volume 3, Appendix to
Enclosure 3, Section 3.a.1).
Question: What is an automated entry control system (AECS) according to DODM 5200.01
Volume 3, Appendix to Enclosure 3? Answer: An AECS is a system that identifies an individual
and authenticates their authority to enter a secure area through the use of an identification (ID)
badge or card. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 3.a.2).
Question: What are the acceptable methods for authentication in an AECS according to DODM
5200.01 Volume 3, Appendix to Enclosure 3? Answer: Authentication methods in an
AECS include using identification badges/cards with embedded sensors, biometrics verification,
personal identification numbers (PINs), and electronic databases of authorized individuals.
(Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 3.a.2.b).
3|Page
, Question: What must be done when an individual's authorization to enter an area is removed
according to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: A procedure must be
established to remove the individual's authorization upon reassignment, transfer, termination, or
suspension/revocation/downgrading of access. (Reference: DODM 5200.01, Volume 3,
Appendix to Enclosure 3, Section 3.a.4).
Question: What is the purpose of an IDS according to DODM 5200.01 Volume 3, Appendix to
Enclosure 3? Answer: The purpose of an IDS is to detect unauthorized penetrations into
secured areas and to serve as a supplemental control when warranted by a risk assessment.
(Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 2.a).
Question: When is the use of an IDS considered warranted according to DODM 5200.01 Volume
3, Appendix to Enclosure 3? Answer: The use of an IDS is considered warranted when the
results of a documented risk assessment determine its use as a supplemental control, in
accordance with Enclosure 3, sections 3 and 4 of this Volume, and when approved by the activity
head. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 2.a).
Question: How does an IDS complement other physical security measures according to DODM
5200.01 Volume 3, Appendix to Enclosure 3? Answer: An IDS complements other
physical security measures by consisting of intrusion detection equipment (IDE), security forces,
and operating procedures. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3,
Section 2.a).
Question: What are the components of an IDS system according to DODM 5200.01 Volume 3,
Appendix to Enclosure 3? Answer: An IDS system consists of intrusion detection equipment
(IDE), security forces, and operating procedures that operate as a system with distinct phases:
detection, communications, assessment, and response. (Reference: DODM 5200.01, Volume 3,
Appendix to Enclosure 3, Section 2.b.1).
Question: How does an IDS contribute to maintaining an acceptable degree of protection
according to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: An IDS contributes
to maintaining an acceptable degree of protection by detecting alarm conditions, communicating
these conditions to security personnel, assessing situations, and initiating response actions to
safeguard secure areas. (Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3,
Section 2.b.1-2).
Question: What are the components of an IDS system according to DODM 5200.01 Volume 3,
Appendix to Enclosure 3? Answer: An IDS system consists of intrusion detection equipment
(IDE), security forces, and operating procedures that operate as a system with four distinct
phases: detection, communications, assessment, and response. (Reference: DODM 5200.01,
Volume 3, Appendix to Enclosure 3, Section 2.b.1).
Question: What is the purpose of the detection phase in an IDS system according to DODM
5200.01 Volume 3, Appendix to Enclosure 3? Answer: During the detection phase, a
detector or sensor senses and reacts to the stimuli it is designed to detect, transmitting the sensor
alarm condition to the premise control unit (PCU) over cabling located within the protected area.
(Reference: DODM 5200.01, Volume 3, Appendix to Enclosure 3, Section 2.b.2.a).
Question: How does an IDS system handle communications during an alarm condition according
to DODM 5200.01 Volume 3, Appendix to Enclosure 3? Answer: The PCU receives signals
4|Page
