The purpose of ________________________ is to confirm or deny the presence of potential or
suspected CBRN threats/hazards or contamination within a given area.
Give this one a try later!
Area Reconnaissance
________CBRN hazards is described as determining the amount of the specific CBRN
hazard present in the environment.
Give this one a try later!
Quantify
,What type of water-cooled condenser is ideally suited for laboratory scaled
refluxing?
Give this one a try later!
Allihn Condenser
Signs are normally placed to create a 200 meter _____ around the area of _______
contamination.
Give this one a try later!
buffer, actual
What visual display notifies the operator laser operator energy is exiting from the First
Defender?
Give this one a try later!
Laser aperture indicator light
________environmental CBRN samples is described as obtaining a representative amount
of the CBRN hazard for subsequent analysis later.
Give this one a try later!
, Collect
CBRN monitoring technique during CBRN surveillance missions consists of frequent
checks of the environment for the arrival or presence of CBRN hazards.
Give this one a try later!
Periodic
__________ CBRN R & S operations are usually performed from a distant location through
a communication link to a CBRN detector or monitor.
Give this one a try later!
Remote
This report is used to pass evaluated data from the collected NBC 1 reports.
Give this one a try later!
CBRN 2 Report
The purpose of ______ a CBRN contaminated area warns US and allied forces of
contamination threats/hazards, but the signs must be placed where they are most
likely to be seen.
suspected CBRN threats/hazards or contamination within a given area.
Give this one a try later!
Area Reconnaissance
________CBRN hazards is described as determining the amount of the specific CBRN
hazard present in the environment.
Give this one a try later!
Quantify
,What type of water-cooled condenser is ideally suited for laboratory scaled
refluxing?
Give this one a try later!
Allihn Condenser
Signs are normally placed to create a 200 meter _____ around the area of _______
contamination.
Give this one a try later!
buffer, actual
What visual display notifies the operator laser operator energy is exiting from the First
Defender?
Give this one a try later!
Laser aperture indicator light
________environmental CBRN samples is described as obtaining a representative amount
of the CBRN hazard for subsequent analysis later.
Give this one a try later!
, Collect
CBRN monitoring technique during CBRN surveillance missions consists of frequent
checks of the environment for the arrival or presence of CBRN hazards.
Give this one a try later!
Periodic
__________ CBRN R & S operations are usually performed from a distant location through
a communication link to a CBRN detector or monitor.
Give this one a try later!
Remote
This report is used to pass evaluated data from the collected NBC 1 reports.
Give this one a try later!
CBRN 2 Report
The purpose of ______ a CBRN contaminated area warns US and allied forces of
contamination threats/hazards, but the signs must be placed where they are most
likely to be seen.
