NSW Forklift Exam Questions and Verified Answers
100% Guarantee Pass
1. When should you check the forklift for damage and/or defects?
Answer: Before and after use to ensure it is safe to use
2. List 4 liquids used in forklifts that you would need to check as part of an
inspection -
Answer: 1) Engine Oil
2) Brake Fluid
3) Coolant
4) Fuel
3. List 6 things that should be checked when undertaking a pre-operational
check of the forklift before operation
Answer: 1) Fluids
2) Tyres
3) Data Plate
4) All Guards
,5) Mast
6) Hoses
4. List 6 post-start checks that should be made after starting and before oper-
ating the forklift
Answer: 1) Guards
2) Lights
3) Warning devices
4) Hydraulic controls
5) Brakes
6) Steering
5. What is the logical order of the hierarchy of control? (Every Sunday I Eat Apple Pie)
Answer: 1) Elimination
2) Substitution
3) Isolation
4) Engineering Controls
5) Administrative Controls
6) PPE
6. Why is it important to communicate with workplace personnel and safety
, officers before commencing work on site?
Answer: To ensure workplace laws, policies and procedures are understood and followed
7. In what ways does communication take place in the workplace? (List 3)
Answer: 1) Verbal
2) Written instructions
3) Signage
8. Before you commence work, who should you consult about site hazards? (List 4)
Answer: 1) Safety oflcers
2) Supervisors
3) Workmates
4) Managers
9. Are you allowed to use a forklift that has a missing data plate? - Yes/No
Answer: NO
10. What action should you take if you find that a data place is missing from a
forklift? (List 3)
Answer: 1) Remove Key
2) Tag "out of service"
3) Record in log book
100% Guarantee Pass
1. When should you check the forklift for damage and/or defects?
Answer: Before and after use to ensure it is safe to use
2. List 4 liquids used in forklifts that you would need to check as part of an
inspection -
Answer: 1) Engine Oil
2) Brake Fluid
3) Coolant
4) Fuel
3. List 6 things that should be checked when undertaking a pre-operational
check of the forklift before operation
Answer: 1) Fluids
2) Tyres
3) Data Plate
4) All Guards
,5) Mast
6) Hoses
4. List 6 post-start checks that should be made after starting and before oper-
ating the forklift
Answer: 1) Guards
2) Lights
3) Warning devices
4) Hydraulic controls
5) Brakes
6) Steering
5. What is the logical order of the hierarchy of control? (Every Sunday I Eat Apple Pie)
Answer: 1) Elimination
2) Substitution
3) Isolation
4) Engineering Controls
5) Administrative Controls
6) PPE
6. Why is it important to communicate with workplace personnel and safety
, officers before commencing work on site?
Answer: To ensure workplace laws, policies and procedures are understood and followed
7. In what ways does communication take place in the workplace? (List 3)
Answer: 1) Verbal
2) Written instructions
3) Signage
8. Before you commence work, who should you consult about site hazards? (List 4)
Answer: 1) Safety oflcers
2) Supervisors
3) Workmates
4) Managers
9. Are you allowed to use a forklift that has a missing data plate? - Yes/No
Answer: NO
10. What action should you take if you find that a data place is missing from a
forklift? (List 3)
Answer: 1) Remove Key
2) Tag "out of service"
3) Record in log book
