Virginia Commercial Pesticide
Applicator Category 7A General
Structural Pest Control Certification
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
Pdf
1. Which federal law primarily regulates the sale and use of pesticides in
the United States?
A. Clean Water Act
B. Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA)
C. Endangered Species Act
D. Toxic Substances Control Act
FIFRA is the principal federal statute governing pesticide registration,
distribution, sale, and use to ensure minimal risk when used
according to label directions.
2. What is the primary purpose of a pesticide label?
A. To advertise the product
B. To provide mixing recipes for custom formulations
C. To offer legally enforceable directions for safe and effective use
, D. To list the chemical formula
The pesticide label legally instructs applicators on proper use,
dosage, safety precautions, and legal restrictions.
3. A pest control technician notices insects emerging from wall voids
after treatment. What is the most appropriate corrective action?
A. Increase the pesticide concentration
B. Retreat all external perimeter areas
C. Evaluate entry points and apply residual pesticides in voids if
labeled
D. Switch to a non-labeled pesticide
Evaluating pest entry points and then applying an appropriately
labeled residual treatment addresses the root cause and complies
with label use.
4. What does the signal word “Danger” indicate about a pesticide’s acute
toxicity?
A. Slight toxicity
B. Moderate toxicity
C. High toxicity
D. Minimal risk
“Danger” on a pesticide label signals a high level of acute toxicity
and requires strict adherence to protective measures.
5. Which personal protective equipment (PPE) is generally required when
handling concentrated liquid pesticides?
A. Cotton gloves
B. Chemical-resistant gloves and eye protection
C. Flip-flops
D. Dust mask
Chemical-resistant gloves and eye protection protect against dermal
and splash hazards posed by concentrated pesticides.
, 6. What is the term for pests that can damage structural wood by feeding
on cellulose?
A. Cockroaches
B. Termites
C. Rodents
D. Ants
Termites consume cellulose in wood and are primary wood-
destroying pests in structural pest control.
7. When treating for subterranean termites, where should a barrier
application of termiticide be placed?
A. Above the attic insulation
B. On furniture inside the home
C. In the soil around and under the structure’s foundation
D. In wall outlets
Barrier applications for termites involve placing termiticide in the soil
to interrupt termite foraging routes.
8. Which insecticide formulation is most suitable for penetrating cracks
and crevices?
A. Granules
B. Baits
C. Microencapsulated liquids
D. Soluble powders
Microencapsulated liquids provide prolonged residual activity and
can penetrate voids when applied appropriately.
9. What is the key characteristic of integrated pest management (IPM)?
A. Use pesticides exclusively
B. Eliminate all insects regardless of species
C. Combining multiple control tactics based on pest biology
D. Complete exclusion of monitoring
Applicator Category 7A General
Structural Pest Control Certification
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
1. Which federal law primarily regulates the sale and use of pesticides in
the United States?
A. Clean Water Act
B. Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA)
C. Endangered Species Act
D. Toxic Substances Control Act
FIFRA is the principal federal statute governing pesticide registration,
distribution, sale, and use to ensure minimal risk when used
according to label directions.
2. What is the primary purpose of a pesticide label?
A. To advertise the product
B. To provide mixing recipes for custom formulations
C. To offer legally enforceable directions for safe and effective use
, D. To list the chemical formula
The pesticide label legally instructs applicators on proper use,
dosage, safety precautions, and legal restrictions.
3. A pest control technician notices insects emerging from wall voids
after treatment. What is the most appropriate corrective action?
A. Increase the pesticide concentration
B. Retreat all external perimeter areas
C. Evaluate entry points and apply residual pesticides in voids if
labeled
D. Switch to a non-labeled pesticide
Evaluating pest entry points and then applying an appropriately
labeled residual treatment addresses the root cause and complies
with label use.
4. What does the signal word “Danger” indicate about a pesticide’s acute
toxicity?
A. Slight toxicity
B. Moderate toxicity
C. High toxicity
D. Minimal risk
“Danger” on a pesticide label signals a high level of acute toxicity
and requires strict adherence to protective measures.
5. Which personal protective equipment (PPE) is generally required when
handling concentrated liquid pesticides?
A. Cotton gloves
B. Chemical-resistant gloves and eye protection
C. Flip-flops
D. Dust mask
Chemical-resistant gloves and eye protection protect against dermal
and splash hazards posed by concentrated pesticides.
, 6. What is the term for pests that can damage structural wood by feeding
on cellulose?
A. Cockroaches
B. Termites
C. Rodents
D. Ants
Termites consume cellulose in wood and are primary wood-
destroying pests in structural pest control.
7. When treating for subterranean termites, where should a barrier
application of termiticide be placed?
A. Above the attic insulation
B. On furniture inside the home
C. In the soil around and under the structure’s foundation
D. In wall outlets
Barrier applications for termites involve placing termiticide in the soil
to interrupt termite foraging routes.
8. Which insecticide formulation is most suitable for penetrating cracks
and crevices?
A. Granules
B. Baits
C. Microencapsulated liquids
D. Soluble powders
Microencapsulated liquids provide prolonged residual activity and
can penetrate voids when applied appropriately.
9. What is the key characteristic of integrated pest management (IPM)?
A. Use pesticides exclusively
B. Eliminate all insects regardless of species
C. Combining multiple control tactics based on pest biology
D. Complete exclusion of monitoring
