Exam Edge CBSPD 2 Questions and
Answers11
An inanimate object or substance that is capable of transmitting infectious organisms from one
individual to another is called a(n) - ANSWERS-Fomite
The proper way to measure a hemostatic forcep is? - ANSWERS-From the tip to the bottom of
the rings.
When retrieving reusable sharps that have come in contact with blood, the best method is to? -
ANSWERS-Use engineering controls like forceps to retrieve.
In the come-up/first prevacuum sterilization cycle, the vacuum system pumps approximately
what percent of air out of the chamber? - ANSWERS-90%
All items disinfected with glutaraldehydes must be rinsed thoroughly. Tap water should not be
used for which of the following reasons. - ANSWERS-It will add bioburden again.
The inventory strategy that imposes higher controls on relatively few items with greatest value
and least on items with lowest value is which of the following? - ANSWERS-ABC analysis.
When patients come into contact with chemical residues, they can receive chemical burns or
other complications. To ensure that this does not occur, all items sterilized with ethylene oxide
must be? - ANSWERS-Aerated.
Which aspect of quality control documents each item processed, assists in proper stock
rotation, establishes accountability, and assists with recalls? - ANSWERS-Product identification
and traceability.
, When a group is keenly aware of significant details, notices errors in the making, and has the
shared expertise and freedom to act on what it notices, this is known as which of the following?
- ANSWERS-Collective mindfulness.
All of the following are factors affecting sterilization EXCEPT? - ANSWERS-The amount of
bioburden must be high enough to ensure the effectiveness of the sterilization process.
Peel pouches should not be too small because instruments may place stress on the pouch which
may cause a tear. Neither should pouches be too large. The reason for this is which of the
following? - ANSWERS-Movement may result in contents sliding and contents could break seals.
Which of the following statements about packaging practices is least accurate? - ANSWERS-
Packages to be sterilized should not be labeled until after sterilization.
Packs containing woven materials should not exceed the accepted maximum size of? -
ANSWERS-12x12x20 inches.
Which of the following is not a proper guideline for packaging items for sterilization? -
ANSWERS-Items with removable parts should be fully assembled.
Three conditions can compromise the ability of a package to maintain the sterility of its
contents. They include all but which of the following? - ANSWERS-The sterilization method
used.
When a quantity of each item equal to that item's reorder quantity is reserved, which of the
following order processing systems is being used? - ANSWERS-Two-bin system.
There are two types of sterile solutions. The solution that is administered to patients
intravenously is a(n)? - ANSWERS-Parenteral solution.
Answers11
An inanimate object or substance that is capable of transmitting infectious organisms from one
individual to another is called a(n) - ANSWERS-Fomite
The proper way to measure a hemostatic forcep is? - ANSWERS-From the tip to the bottom of
the rings.
When retrieving reusable sharps that have come in contact with blood, the best method is to? -
ANSWERS-Use engineering controls like forceps to retrieve.
In the come-up/first prevacuum sterilization cycle, the vacuum system pumps approximately
what percent of air out of the chamber? - ANSWERS-90%
All items disinfected with glutaraldehydes must be rinsed thoroughly. Tap water should not be
used for which of the following reasons. - ANSWERS-It will add bioburden again.
The inventory strategy that imposes higher controls on relatively few items with greatest value
and least on items with lowest value is which of the following? - ANSWERS-ABC analysis.
When patients come into contact with chemical residues, they can receive chemical burns or
other complications. To ensure that this does not occur, all items sterilized with ethylene oxide
must be? - ANSWERS-Aerated.
Which aspect of quality control documents each item processed, assists in proper stock
rotation, establishes accountability, and assists with recalls? - ANSWERS-Product identification
and traceability.
, When a group is keenly aware of significant details, notices errors in the making, and has the
shared expertise and freedom to act on what it notices, this is known as which of the following?
- ANSWERS-Collective mindfulness.
All of the following are factors affecting sterilization EXCEPT? - ANSWERS-The amount of
bioburden must be high enough to ensure the effectiveness of the sterilization process.
Peel pouches should not be too small because instruments may place stress on the pouch which
may cause a tear. Neither should pouches be too large. The reason for this is which of the
following? - ANSWERS-Movement may result in contents sliding and contents could break seals.
Which of the following statements about packaging practices is least accurate? - ANSWERS-
Packages to be sterilized should not be labeled until after sterilization.
Packs containing woven materials should not exceed the accepted maximum size of? -
ANSWERS-12x12x20 inches.
Which of the following is not a proper guideline for packaging items for sterilization? -
ANSWERS-Items with removable parts should be fully assembled.
Three conditions can compromise the ability of a package to maintain the sterility of its
contents. They include all but which of the following? - ANSWERS-The sterilization method
used.
When a quantity of each item equal to that item's reorder quantity is reserved, which of the
following order processing systems is being used? - ANSWERS-Two-bin system.
There are two types of sterile solutions. The solution that is administered to patients
intravenously is a(n)? - ANSWERS-Parenteral solution.
