AZ Floor Covering Contractors License (Classification: CR-
8) Questions With Complete Solutions
#15 asphalt coated paper Correct Answers When installing oak
strip flooring over 3/4 inch plywood sub-floor, what is the first
thing you do after the sub-floor is cleaned?
1 inch equals 1 foot Correct Answers Which scale would show
the most detail on the same set of drawings?
1-1/2 inch machine driven fastener Correct Answers Which
one of the following should be used when installing 1/2 inch
thick by 2 inch strip tongue-and-groove (T&G) flooring?
1-3 weeks Correct Answers According to the NOFMA, how
much time should be allowed for a solid strip floor to acclimate
before proceeding with sanding and finishing the operation?
1-3/16 inches & 2-11/16 inches Correct Answers What is the
recommended amount of distance to stretch carpet in a room 10
feet wide by 15 feet long? (Stretch 1% to 1-1/2% in length and
width)
1/2 Correct Answers When applying adhesive to lay VCT
(Vinyl Composite Tile), the adhesive should be applied to ____
of the work area.
1/2 the depth Correct Answers When re-grouting tile, how
much old grout should you remove?
, 1/4 Correct Answers When setting quarry tile on fresh set mud
you should leave the grout joints how deep?
1/4 inch Correct Answers When installing under-layment, how
much gap should be left between the under-layment and the
wall?
1/4 inch Correct Answers When installing underlayment, how
much gap should be left between the underlayment and the wall?
1/4 inch Correct Answers When setting quarry tile on fresh set
mud you should leave the grout joints how deep?
1/4 inch in 10 feet Correct Answers A vertical wall, what is the
acceptable tolerance for being plumb?
1/8 inch gap between the sheets and a 1/2 inch gap along the
walls Correct Answers 3/4 inch under-layment method
plywood subfloor for a parquet floor should be installed with:
1/8 inch gap between the sheets and a 1/2 inch gap between the
walls Correct Answers 3/4 inch underlaymnet method plywood
subfloor for a parquet floor should be installed with?
1/8 inch on ends and edges Correct Answers When applying
plywood sub-flooring the minimum spacing between adjacent
panels at the edge is?
10 Correct Answers When blind nailing 6ft plank flooring, how
many nails are used per plank?
8) Questions With Complete Solutions
#15 asphalt coated paper Correct Answers When installing oak
strip flooring over 3/4 inch plywood sub-floor, what is the first
thing you do after the sub-floor is cleaned?
1 inch equals 1 foot Correct Answers Which scale would show
the most detail on the same set of drawings?
1-1/2 inch machine driven fastener Correct Answers Which
one of the following should be used when installing 1/2 inch
thick by 2 inch strip tongue-and-groove (T&G) flooring?
1-3 weeks Correct Answers According to the NOFMA, how
much time should be allowed for a solid strip floor to acclimate
before proceeding with sanding and finishing the operation?
1-3/16 inches & 2-11/16 inches Correct Answers What is the
recommended amount of distance to stretch carpet in a room 10
feet wide by 15 feet long? (Stretch 1% to 1-1/2% in length and
width)
1/2 Correct Answers When applying adhesive to lay VCT
(Vinyl Composite Tile), the adhesive should be applied to ____
of the work area.
1/2 the depth Correct Answers When re-grouting tile, how
much old grout should you remove?
, 1/4 Correct Answers When setting quarry tile on fresh set mud
you should leave the grout joints how deep?
1/4 inch Correct Answers When installing under-layment, how
much gap should be left between the under-layment and the
wall?
1/4 inch Correct Answers When installing underlayment, how
much gap should be left between the underlayment and the wall?
1/4 inch Correct Answers When setting quarry tile on fresh set
mud you should leave the grout joints how deep?
1/4 inch in 10 feet Correct Answers A vertical wall, what is the
acceptable tolerance for being plumb?
1/8 inch gap between the sheets and a 1/2 inch gap along the
walls Correct Answers 3/4 inch under-layment method
plywood subfloor for a parquet floor should be installed with:
1/8 inch gap between the sheets and a 1/2 inch gap between the
walls Correct Answers 3/4 inch underlaymnet method plywood
subfloor for a parquet floor should be installed with?
1/8 inch on ends and edges Correct Answers When applying
plywood sub-flooring the minimum spacing between adjacent
panels at the edge is?
10 Correct Answers When blind nailing 6ft plank flooring, how
many nails are used per plank?
