GLOBUS QUIZZES FINAL TEST 2026
QUESTIONS WITH CORRECT ANSWERS
GRADED A+
◍ What are all available cartridge options in the InstaFill system?.
Answer: Prefilled DBM CartridgePrefilled SIGNIFY® Gel CartridgeEmpty
Cartridge
◍ ELLIPSE: The pre-set drill guide is fixed to how many mm?.
Answer: 14mm
◍ MAGNIFY-S: When contracting the implant DO NOT use excess torque as
implant integrity can be compromised.
Answer: True
◍ What are the three ALTERA features to present to surgeons?.
Answer: SteerabilityExpandabilityPackability
◍ Which of the following widths are available with SABLE ®? (Choose all
that apply).
Answer: 8, 10, 12mm
◍ RISE is intended for use at what levels in the spine?.
Answer: T1-S1
◍ Ptolemy.
Answer: astronomer whose book "Almagest" mathematically described the
geocentric view of the universe
◍ COALITION AGX: Allograft must be hydrated prior to assembly?.
Answer: True
◍ What are the sagittal profiles available with INDEPENDENCE?.
Answer: 8°, 15°, 20°
, ◍ SABLE®: How many revolutions of the Torque-Limiting Handle equal
1mm of expansion?.
Answer: 1.75 revolutions
◍ COALITION MIS: If an Anchor needs to be removed from the spacer once
implanted, what should you advice the surgeon before the removal?.
Answer: All of the above
◍ SI-LOK is indicated for the ________ approach?.
Answer: Lateral
◍ QUARTEX: What is the largest diameter screw?.
Answer: 5.5mm
◍ REVOLVE: How many Nm does the REVOLVE torque limiting 3.5mm
hex driver torque?.
Answer: 5.5Nm
◍ The torque on the CREO 5.5 system is?.
Answer: 5.5 Nm
◍ ELLIPSE: What is the smallest length polyaxial screw available?.
Answer: 8mm
◍ QUARTEX: What is the conical screw angulation of a 4.0mm diameter
screw? *.
Answer: 90° (+/- 45)
◍ The INDEPENDENCE screws allows for how many degrees of conical
variability?.
Answer: 5° variability
◍ MAGNIFY-S: How many revolutions of Torque Limiting Hex Driver will
result in 1mm expansion?.
Answer: 1.5
◍ CREO® Threaded will accommodate which rod diameter(s)?.
Answer: 5.5 & 6.0
QUESTIONS WITH CORRECT ANSWERS
GRADED A+
◍ What are all available cartridge options in the InstaFill system?.
Answer: Prefilled DBM CartridgePrefilled SIGNIFY® Gel CartridgeEmpty
Cartridge
◍ ELLIPSE: The pre-set drill guide is fixed to how many mm?.
Answer: 14mm
◍ MAGNIFY-S: When contracting the implant DO NOT use excess torque as
implant integrity can be compromised.
Answer: True
◍ What are the three ALTERA features to present to surgeons?.
Answer: SteerabilityExpandabilityPackability
◍ Which of the following widths are available with SABLE ®? (Choose all
that apply).
Answer: 8, 10, 12mm
◍ RISE is intended for use at what levels in the spine?.
Answer: T1-S1
◍ Ptolemy.
Answer: astronomer whose book "Almagest" mathematically described the
geocentric view of the universe
◍ COALITION AGX: Allograft must be hydrated prior to assembly?.
Answer: True
◍ What are the sagittal profiles available with INDEPENDENCE?.
Answer: 8°, 15°, 20°
, ◍ SABLE®: How many revolutions of the Torque-Limiting Handle equal
1mm of expansion?.
Answer: 1.75 revolutions
◍ COALITION MIS: If an Anchor needs to be removed from the spacer once
implanted, what should you advice the surgeon before the removal?.
Answer: All of the above
◍ SI-LOK is indicated for the ________ approach?.
Answer: Lateral
◍ QUARTEX: What is the largest diameter screw?.
Answer: 5.5mm
◍ REVOLVE: How many Nm does the REVOLVE torque limiting 3.5mm
hex driver torque?.
Answer: 5.5Nm
◍ The torque on the CREO 5.5 system is?.
Answer: 5.5 Nm
◍ ELLIPSE: What is the smallest length polyaxial screw available?.
Answer: 8mm
◍ QUARTEX: What is the conical screw angulation of a 4.0mm diameter
screw? *.
Answer: 90° (+/- 45)
◍ The INDEPENDENCE screws allows for how many degrees of conical
variability?.
Answer: 5° variability
◍ MAGNIFY-S: How many revolutions of Torque Limiting Hex Driver will
result in 1mm expansion?.
Answer: 1.5
◍ CREO® Threaded will accommodate which rod diameter(s)?.
Answer: 5.5 & 6.0
