CSX Freight Conductor Test 2 Exam study guide
COMPLETE EXAM Questions and Answers
(Verified Answers) (Latest Update 2026)
UPDATE!!
Save
Terms in this set (72)
How long is a Class 1 brake test 24 hours
good if the train has been off air?
True or False: A class 1 brake test True
must be performed on the entire
train where the train is originally
assembled.
How many cars on a train have to All each brake must apply and release
have working air brakes during a
class 1 brake test?
When retesting a car after failing a 3 minutes
brake test how long must the retest
take?
Which is true regarding a class 1 Both sides of the car are examined during the
brake test? inspection process to observe the functioning of
all moving parts of the brake system.
, What device do you arm the EOT the HTD
to?
What is the Branch Pipe Cut Out To cut the control valve in and out on a
Cock used for? locomotive or car
What does off air mean? Not being supplied air
Before you perform a roll by Yes
inspection do both sides need to
be inspected?
What is the maximum speed for a 10 MPH
roll by inspection?
Telemetry can be used to perform 1) The controlling locomotive has an operative
brake tests when: Select All That HTD
Apply 2) The rear car is equipped with an operative EOT
What brake test is required after Class III
recoupling at a crossing where no
changes to the consist were made?
True or False: When notified by the True
mechanical department that the
emergency capability of telemetry
passed a bench test, no further test
is required.
When a train is required to be off air Class 1
for more than 24 hours, what Brake
Test is required?
Which of the following are required 1) Red Flag
to provide warning signals during 2) Red Fusees
the day? Select all that apply
COMPLETE EXAM Questions and Answers
(Verified Answers) (Latest Update 2026)
UPDATE!!
Save
Terms in this set (72)
How long is a Class 1 brake test 24 hours
good if the train has been off air?
True or False: A class 1 brake test True
must be performed on the entire
train where the train is originally
assembled.
How many cars on a train have to All each brake must apply and release
have working air brakes during a
class 1 brake test?
When retesting a car after failing a 3 minutes
brake test how long must the retest
take?
Which is true regarding a class 1 Both sides of the car are examined during the
brake test? inspection process to observe the functioning of
all moving parts of the brake system.
, What device do you arm the EOT the HTD
to?
What is the Branch Pipe Cut Out To cut the control valve in and out on a
Cock used for? locomotive or car
What does off air mean? Not being supplied air
Before you perform a roll by Yes
inspection do both sides need to
be inspected?
What is the maximum speed for a 10 MPH
roll by inspection?
Telemetry can be used to perform 1) The controlling locomotive has an operative
brake tests when: Select All That HTD
Apply 2) The rear car is equipped with an operative EOT
What brake test is required after Class III
recoupling at a crossing where no
changes to the consist were made?
True or False: When notified by the True
mechanical department that the
emergency capability of telemetry
passed a bench test, no further test
is required.
When a train is required to be off air Class 1
for more than 24 hours, what Brake
Test is required?
Which of the following are required 1) Red Flag
to provide warning signals during 2) Red Fusees
the day? Select all that apply
